A competitor to Overwatch featuring environmental destruction, which makes it CPU heavy. DX12 and 12GB of RAM are the minimum requirements.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 286 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 218 FPS. At 4K, all settings exceed 101 FPS.
The GeForce RTX 4090 is 131% above the recommended GPU (GeForce RTX 2060 Super) for Marvel Rivals. The Xeon w5-2445 is 47% above the recommended CPU (Core i5-10400).
At lower resolutions (all 4k settings), the Xeon w5-2445 sets the FPS ceiling. As graphical load increases at (1080p ultra), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p (low/medium/high), all 1440p settings.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the Xeon w5-2445 sets the ceiling at about 141 FPS, while the GeForce RTX 4090 could reach 169 FPS. In this scenario, the CPU limits the GPU potential by 17% (FPS gap: 28 FPS). Overall distribution: CPU limits 4/12 cells, GPU limits 1/12, balanced 7/12.
The Xeon w5-2445 and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | Balanced | Balanced | GPU Limits CPU 7% |
| 1440p (2K QHD) | Balanced | Balanced | Balanced | Balanced |
| 4K (Ultra HD) | CPU Limits GPU 14% | CPU Limits GPU 17% | CPU Limits GPU 14% | CPU Limits GPU 13% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU43% - 59% <> GPU84% - 86% <> | CPU44% - 60% <> GPU84% - 86% <> | CPU44% - 60% <> GPU84% - 86% <> | CPU47% - 60% <> GPU82% - 85% <> |
| 1440p (2K QHD) | CPU40% - 59% <> GPU92% - 95% <> | CPU40% - 59% <> GPU93% - 95% <> | CPU40% - 59% <> GPU93% - 95% <> | CPU40% - 59% <> GPU92% - 95% <> |
| 4K (Ultra HD) | CPU25% - 46% <> GPU92% - 93% <> | CPU25% - 46% <> GPU92% - 93% <> | CPU25% - 46% <> GPU92% - 93% <> | CPU25% - 46% <> GPU92% - 93% <> |
The Xeon w5-2445 + GeForce RTX 4090 pairing runs this title with CPU utilization between 25% and 60% and GPU utilization between 82% and 95%. Xeon w5-2445 keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 85% at 1080p to 92% at 4K, while CPU averages move from 52% to 36%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) Low, the GeForce RTX 4090 averages 94% usage (92-95%), while the Xeon w5-2445 stays at 50% (40-59%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 52% and GPU 85%. At 1440p, that shifts to CPU 50% and GPU 94%, and at 4K it reaches CPU 36% and GPU 92%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 51% (43-59%) and GPU 85% (84-86%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon w5-2445 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Xeon w5-2445 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 47% above and your GPU is 131% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+47%vsrecommended
+131%vsrecommended
+148%vsminimum
+279%vsminimum
Yes, the Xeon w5-2445 paired with the GeForce RTX 4090 can run Marvel Rivals smoothly up to 4k achieving around 101 FPS at Ultra quality. Your GPU is 131% above the recommended specs, and your CPU is 47% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Marvel Rivals, upgrading the CPU would have the biggest impact on performance. The Xeon w5-2445 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 4k low, 4k medium, 4k high, 4k ultra. GPU fully utilized at: 1080p ultra.
Marvel Rivals does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Marvel Rivals requires at minimum a Core i5-6600K (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB storage. For the recommended experience, you need a Core i5-10400 and GeForce RTX 2060 Super with 16 GB RAM. Your Xeon w5-2445 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Marvel Rivals FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
