A true test for system memory. Procedural maps can exhaust RAM quickly; 16GB is the minimum, and 32GB is recommended. CPUs with 3D V-Cache (AMD X3D) offer massive performance gains here.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 198 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 167 FPS. At 4K, all settings exceed 85 FPS.
The GeForce RTX 5090 is 251% above the recommended GPU (GeForce GTX 980) for Rust. The Xeon w7-3555 is 453% above the recommended CPU (Core i7-4790K).
At lower resolutions (4k low), the Xeon w7-3555 sets the FPS ceiling. As graphical load increases at (1080p (medium/high/ultra)), the GeForce RTX 5090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p low, all 1440p settings, 4k (medium/high/ultra).
Approximated average price on current market:
Combo price: $4899. At 1080p Ultra, this combo delivers 198 FPS, equivalent to 0.04 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.066 fps/$ | 0.054 fps/$ | 0.046 fps/$ | 0.040 fps/$ |
| 1440p | 0.058 fps/$ | 0.048 fps/$ | 0.041 fps/$ | 0.034 fps/$ |
| 4k | 0.032 fps/$ | 0.025 fps/$ | 0.021 fps/$ | 0.017 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p medium, the GeForce RTX 5090 sets the ceiling at about 281 FPS, while the Xeon w7-3555 has headroom up to 301 FPS. In this scenario, the GPU limits the CPU potential by 7% (FPS gap: 20 FPS). Overall distribution: GPU limits 8/12 cells, CPU limits 0/12, balanced 4/12. Confidence is low because both ceilings are very close in this cell.
The Xeon w7-3555 and GeForce RTX 5090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | GPU Limits CPU 7% | GPU Limits CPU 7% | GPU Limits CPU 7% |
| 1440p (2K QHD) | Balanced | GPU Limits CPU 7% | GPU Limits CPU 7% | GPU Limits CPU 7% |
| 4K (Ultra HD) | Balanced | GPU Limits CPU 7% | GPU Limits CPU 7% | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 453% above and your GPU is 251% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+453%vsrecommended
+251%vsrecommended
+565%vsminimum
+603%vsminimum
Yes, the Xeon w7-3555 paired with the GeForce RTX 5090 can run Rust smoothly up to 4k achieving around 85 FPS at Ultra quality. Your GPU is 251% above the recommended specs, and your CPU is 453% above the recommended requirements.
This CPU + GPU combo costs approximately $4899 ($2199 CPU + $2700 GPU). Your GeForce RTX 5090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 5090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Rust performance right now. GPU fully utilized at: 1080p medium, 1080p high, 1080p ultra. CPU fully utilized at: 4k low.
Rust does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Rust requires at minimum a Core i7-3770 (CPU) and GeForce GTX 670 (GPU) with 10 GB RAM and 25 GB (SSD) storage. For the recommended experience, you need a Core i7-4790K and GeForce GTX 980 with 16 GB RAM. Your Xeon w7-3555 and GeForce RTX 5090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Rust FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
