Grand Theft Auto VFPS onRyzen 5 7600X&GeForce RTX 4090

Grand Theft Auto V

While the base game is older and lighter, GTA V remains relevant due to FiveM RP servers, which drastically increase RAM and CPU consumption due to mods and scripts. The official 'Enhanced' version also recommends modern hardware to handle increased traffic density.

Grand Theft Auto V - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low203 FPS
medium202 FPS
high197 FPS
ultra180 FPS
1440P
low183 FPS
medium186 FPS
high166 FPS
ultra141 FPS
4K
low144 FPS
medium137 FPS
high124 FPS
ultra99 FPS

Performance Report

Grand Theft Auto V

GeForce RTX 4090 + Ryzen 5 7600X
🎮Visual Experience

At 1080p, all quality settings exceed 180 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 141 FPS. At 4K, all settings exceed 99 FPS.

Official Requirements

The GeForce RTX 4090 is 734% above the recommended GPU (GeForce GTX 660) for Grand Theft Auto V. The Ryzen 5 7600X is 377% above the recommended CPU (Core i5-3470).

⚙️FPS Ceiling Analysis

At lower resolutions (4k high), the Ryzen 5 7600X sets the FPS ceiling. As graphical load increases at (1080p low), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p (medium/high/ultra), all 1440p settings, 4k (low/medium/ultra).

💰Value Analysis

Approximated average price on current market:

GeForce RTX 4090:$1649(updated 2/6/2026)
Official Launch Price: $1599
Ryzen 5 7600X:$178(updated 2/6/2026)
Official Launch Price: $299

Combo price: $1827. At 1080p Ultra, this combo delivers 180 FPS, equivalent to 0.1 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.111 fps/$0.111 fps/$0.108 fps/$0.099 fps/$
1440p0.100 fps/$0.102 fps/$0.091 fps/$0.077 fps/$
4k0.079 fps/$0.075 fps/$0.068 fps/$0.054 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Ryzen 5 7600X|GeForce RTX 4090

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 1080p low, the GeForce RTX 4090 sets the ceiling at about 191 FPS, while the Ryzen 5 7600X has headroom up to 207 FPS. In this scenario, the GPU limits the CPU potential by 8% (FPS gap: 16 FPS). Overall distribution: GPU limits 3/12 cells, CPU limits 1/12, balanced 8/12. Confidence is low because both ceilings are very close in this cell.

Verdict

Well Balanced

The Ryzen 5 7600X and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.

🧩Detailed Breakdown
1080p (Full HD)
LowGPU Limits CPU 8%
MediumBalanced
HighGPU Limits CPU 6%
UltraGPU Limits CPU 6%
1440p (2K QHD)
LowBalanced
MediumBalanced
HighBalanced
UltraBalanced
4K (Ultra HD)
LowBalanced
MediumBalanced
HighCPU Limits GPU 8%
UltraBalanced
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Ryzen 5 7600X and GeForce RTX 4090

1080p (Full HD)

Low
CPU35% - 52%
<>
GPU51% - 73%
<>
Medium
CPU35% - 52%
<>
GPU69% - 82%
<>
High
CPU35% - 52%
<>
GPU69% - 82%
<>
Ultra
CPU31% - 56%
<>
GPU81% - 89%
<>

1440p (2K QHD)

Low
CPU23% - 33%
<>
GPU52% - 73%
<>
Medium
CPU23% - 33%
<>
GPU70% - 82%
<>
High
CPU23% - 33%
<>
GPU70% - 82%
<>
Ultra
CPU20% - 30%
<>
GPU81% - 89%
<>

4K (Ultra HD)

Low
CPU19% - 30%
<>
GPU52% - 73%
<>
Medium
CPU19% - 30%
<>
GPU70% - 82%
<>
High
CPU19% - 30%
<>
GPU70% - 82%
<>
Ultra
CPU14% - 27%
<>
GPU81% - 89%
<>

Performance Summary

The Ryzen 5 7600X + GeForce RTX 4090 pairing runs this title with CPU utilization between 14% and 56% and GPU utilization between 51% and 89%. Ryzen 5 7600X keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 75% at 1080p to 75% at 4K, while CPU averages move from 44% to 23%.

Load Interpretation

The utilization pattern is relatively even. The GeForce RTX 4090 reaches 85% average at its highest-load preset, while the Ryzen 5 7600X peaks at 44% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.

Resolution Scaling

At 1080p, averages sit around CPU 44% and GPU 75%. At 1440p, that shifts to CPU 27% and GPU 75%, and at 4K it reaches CPU 23% and GPU 75%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

1080p (Full HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 44% (31-56%) and GPU 85% (81-89%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Ryzen 5 7600X remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 5 7600X and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Grand Theft Auto V Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Ryzen 5 7600X
cpu icon
28,325
Your Score
MinimumCore 2 Quad Q6600
RecommendedCore i5-3470
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce 9800 GT
RecommendedGeForce GTX 660

Your CPU is 377% above and your GPU is 734% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+377%vsrecommended

GPU

+734%vsrecommended

CPU

+1254%vsminimum

GPU

+2650%vsminimum

Minimum Requirements
Video Card: GeForce 9800 GT
Memory: 4 GB
Disk Space: 72 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 660
Processor: Core i5-3470
Memory: 8 GB
Disk Space: 72 GB
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Ryzen 5 7600X and GeForce RTX 4090 run Grand Theft Auto V well?

Yes, the Ryzen 5 7600X paired with the GeForce RTX 4090 can run Grand Theft Auto V smoothly up to 4k achieving around 99 FPS at Ultra quality. Your GPU is 734% above the recommended specs, and your CPU is 377% above the recommended requirements.

2Is there a more cost-effective setup to run Grand Theft Auto V?

This CPU + GPU combo costs approximately $1827 ($178 CPU (Rank #44 Value) + $1649 GPU (Rank #77 Value)). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.

3Which component should I upgrade first to improve Grand Theft Auto V performance?

Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Grand Theft Auto V performance right now. GPU fully utilized at: 1080p low. CPU-limited at: 4k high.

4Does this setup support Frame Generation for Grand Theft Auto V?

Grand Theft Auto V does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Grand Theft Auto V?

Grand Theft Auto V requires at minimum a Core 2 Quad Q6600 (CPU) and GeForce 9800 GT (GPU) with 4 GB RAM and 72 GB storage. For the recommended experience, you need a Core i5-3470 and GeForce GTX 660 with 8 GB RAM. Your Ryzen 5 7600X and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Grand Theft Auto V FPS estimates for the Ryzen 5 7600X and GeForce RTX 4090?

These Grand Theft Auto V FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.