GeForce Go 7950 GTX vs GeForce RTX 3060 Ti

NVIDIA

GeForce Go 7950 GTX

2014Core: 1020 MHzBoost: 1085 MHz
VS
NVIDIA

GeForce RTX 3060 Ti

2020Core: 1410 MHzBoost: 1665 MHz

GeForce Go 7950 GTX vs GeForce RTX 3060 Ti Performance Spectrum

About G3D Mark

G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.

GeForce Go 7950 GTX vs GeForce RTX 3060 Ti FPS Benchmarks

Predicted gaming performance across popular games. Tested paired with Ryzen 7 9800X3D to isolate GPU performance.

Search any supported game below to compare 1080p FPS for both components.

GeForce Go 7950 GTX vs GeForce RTX 3060 Ti: Pros, Cons & Final Verdict

See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.

GeForce Go 7950 GTX

2014

Why buy it

  • Draws 75W instead of 200W, a 125W reduction.

Trade-offs

  • Lower average FPS than GeForce RTX 3060 Ti across 50 tracked games in our benchmark data.
  • Less VRAM, with 512 MB vs 8 GB for high-resolution textures and newer games.
  • No DLSS support; it relies on Upscaling support instead.
  • 2014 hardware with 512 MB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.
  • Lower G3D Mark per dollar, at 0 vs 50.9 G3D/$ (Unknown MSRP vs $399 MSRP).

GeForce RTX 3060 Ti

2020

Why buy it

  • 2964.6% more average FPS across 50 tracked games in our benchmark data.
  • Delivers 100+% more G3D Mark for each dollar spent, at 50.9 vs 0 G3D/$ ($399 MSRP vs Unknown MSRP).
  • Access to DLSS 2 Super Resolution (2020).
  • 1500% more VRAM for high-resolution textures and newer games (8 GB vs 512 MB).
  • Better long-term bet: Ampere (2020−2025) on 8nm gives it a newer hardware base for upcoming games.

Trade-offs

  • 166.7% higher power demand at 200W vs 75W.

Quick Answers

Which GPU is faster for gaming right now?
GeForce RTX 3060 Ti is the faster gaming card right now. In our data, it leads by 2964.6% in average FPS across 50 tracked games in our benchmark data and by 7593.9% in PassMark G3D (20,312 vs 264), so the answer here is pretty clean.
Which GPU is the safer long-term pick for 2026 and beyond?
GeForce RTX 3060 Ti is the safer long-term pick for 2026 and beyond. The case is simple: 8 GB vs 512 MB of VRAM, the newer upscaling stack, DLSS 2 Super Resolution (2020) instead of no meaningful modern upscaling stack, a 8nm process instead of 28nm, and 38 vs 0 ray-tracing units. That gives it more room for heavier textures and higher settings over time.
Which GPU is the better buy today?
GeForce RTX 3060 Ti makes the most sense today based on the pricing and value data we have for this matchup.

GeForce Go 7950 GTX vs GeForce RTX 3060 Ti Technical Specifications

Side-by-side specs, architecture details, clocks, memory, power, and platform differences.

NVIDIA

GeForce Go 7950 GTX

The GeForce Go 7950 GTX is manufactured by NVIDIA. It was released in February 18 2014. It features the Maxwell architecture. The core clock ranges from 1020 MHz to 1085 MHz. It has 640 shading units. The thermal design power (TDP) is 75W. Manufactured using 28 nm process technology. G3D Mark benchmark score: 264 points. Launch price was $149.

NVIDIA

GeForce RTX 3060 Ti

The GeForce RTX 3060 Ti is manufactured by NVIDIA. It was released in December 1 2020. It features the Ampere architecture. The core clock ranges from 1410 MHz to 1665 MHz. It has 4864 shading units. The thermal design power (TDP) is 200W. Manufactured using 8 nm process technology. It features 38 dedicated ray tracing cores for enhanced lighting effects. G3D Mark benchmark score: 20,312 points. Launch price was $399.

Graphics Performance

In G3D Mark, the GeForce Go 7950 GTX scores 264 versus the GeForce RTX 3060 Ti's 20,312 — the GeForce RTX 3060 Ti leads by 7593.9%. The GeForce Go 7950 GTX is built on Maxwell while the GeForce RTX 3060 Ti uses Ampere, both on 28 nm vs 8 nm. Shader units: 640 (GeForce Go 7950 GTX) vs 4,864 (GeForce RTX 3060 Ti). Raw compute: 1.389 TFLOPS (GeForce Go 7950 GTX) vs 16.2 TFLOPS (GeForce RTX 3060 Ti). Boost clocks: 1085 MHz vs 1665 MHz.

FeatureGeForce Go 7950 GTXGeForce RTX 3060 Ti
G3D Mark Score
264
20,312+7594%
Architecture
Maxwell
Ampere
Process Node
28 nm
8 nm
Shading Units
640
4864+660%
Compute (TFLOPS)
1.389 TFLOPS
16.2 TFLOPS+1066%
Boost Clock
1085 MHz
1665 MHz+53%
ROPs
16
80+400%
TMUs
40
152+280%
L1 Cache
0.31 MB
4.8 MB+1448%
L2 Cache
2 MB
4 MB+100%

Advanced Features (DLSS/FSR)

The GeForce RTX 3060 Ti supports the newer DLSS 2 Super Resolution, whereas the GeForce Go 7950 GTX is capped at Upscaling support.

FeatureGeForce Go 7950 GTXGeForce RTX 3060 Ti
Upscaling Tech
Upscaling support
DLSS 2 Super Resolution
Frame Generation
Not Supported
Not Supported
Ray Reconstruction
No
No
Low Latency
NVIDIA Reflex
NVIDIA Reflex
💾

Video Memory (VRAM)

The GeForce Go 7950 GTX has 512 MB of VRAM, while the GeForce RTX 3060 Ti carries 8 GB. GeForce RTX 3060 Ti gives you 1500% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 128-bit on the GeForce Go 7950 GTX and 256-bit on the GeForce RTX 3060 Ti. L2 Cache: 2 MB (GeForce Go 7950 GTX) vs 4 MB (GeForce RTX 3060 Ti) — the GeForce RTX 3060 Ti has significantly larger on-die cache to reduce VRAM reliance.

FeatureGeForce Go 7950 GTXGeForce RTX 3060 Ti
VRAM Capacity
0.5 GB
8 GB+1500%
Memory Type
GDDR5
GDDR6
Memory Bandwidth
Unknown
448 GB/s
Bus Width
128-bit
256-bit+100%
L2 Cache
2 MB
4 MB+100%
🖥️

Display & API Support

DirectX support: 9.0c (GeForce Go 7950 GTX) vs 12 Ultimate (12_2) (GeForce RTX 3060 Ti). Vulkan: None vs 1.3. OpenGL: 2.1 vs 4.6. Maximum simultaneous displays: 2 vs 4.

FeatureGeForce Go 7950 GTXGeForce RTX 3060 Ti
DirectX
9.0c
12 Ultimate (12_2)+33%
Vulkan
None
1.3
OpenGL
2.1
4.6+119%
Max Displays
2
4+100%
🎬

Media & Encoding

Hardware encoder: No (GeForce Go 7950 GTX) vs NVENC (Ampere) (GeForce RTX 3060 Ti). Decoder: PureVideo vs NVDEC (Ampere). Supported codecs: MPEG-2,WMV9,H.264 (GeForce Go 7950 GTX) vs H.264,H.265,VP9,AV1 (GeForce RTX 3060 Ti).

FeatureGeForce Go 7950 GTXGeForce RTX 3060 Ti
Encoder
No
NVENC (Ampere)
Decoder
PureVideo
NVDEC (Ampere)
Codecs
MPEG-2,WMV9,H.264
H.264,H.265,VP9,AV1
🔌

Power & Dimensions

The GeForce Go 7950 GTX draws 75W versus the GeForce RTX 3060 Ti's 200W — a 90.9% difference. The GeForce Go 7950 GTX is more power-efficient. Recommended PSU: 350W (GeForce Go 7950 GTX) vs 600W (GeForce RTX 3060 Ti). Power connectors: PCIe-powered vs 8-pin. Card length: 0mm vs 242mm, occupying 0 vs 2 slots. Typical load temperature: 85°C vs 75.

FeatureGeForce Go 7950 GTXGeForce RTX 3060 Ti
TDP
75W-63%
200W
Recommended PSU
350W-42%
600W
Power Connector
PCIe-powered
8-pin
Length
0mm
242mm
Height
0mm
112mm
Slots
0-100%
2
Temp (Load)
85°C
75-12%
Perf/Watt
3.5
101.6+2803%
💰

Value Analysis

The newer card here is GeForce RTX 3060 Ti (2020 vs 2014).

FeatureGeForce Go 7950 GTXGeForce RTX 3060 Ti
MSRP
$399
Codename
GM107
GA104
Release
February 18 2014
December 1 2020
Ranking
#501
#73

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.