Extremely lightweight. The main requirement is a stable network connection. It runs on almost anything with a screen.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 34 to 40 FPS depending on quality settings. At 1440p, performance is around 40 FPS. At 4K, performance is around 40 FPS.
The GeForce RTX 4090 is 2070% above the recommended GPU (GeForce GTX 650) for Among Us. The A8-3530MX is 54% below minimum CPU requirement.
The A8-3530MX sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the A8-3530MX sets the ceiling at about 27 FPS, while the GeForce RTX 4090 could reach 329 FPS. In this scenario, the CPU limits the GPU potential by 92% (FPS gap: 302 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your A8-3530MX is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 91% | CPU Limits GPU 91% | CPU Limits GPU 92% | CPU Limits GPU 91% |
| 1440p (2K QHD) | CPU Limits GPU 62% | CPU Limits GPU 62% | CPU Limits GPU 63% | CPU Limits GPU 64% |
| 4K (Ultra HD) | CPU Limits GPU 58% | CPU Limits GPU 59% | CPU Limits GPU 60% | CPU Limits GPU 60% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU11% - 20% <> GPU1% - 6% <> | CPU11% - 20% <> GPU1% - 6% <> | CPU11% - 20% <> GPU1% - 6% <> | CPU3% - 9% <> GPU3% - 16% <> |
| 1440p (2K QHD) | CPU12% - 22% <> GPU0% - 6% <> | CPU12% - 22% <> GPU0% - 6% <> | CPU12% - 22% <> GPU0% - 6% <> | CPU2% - 9% <> GPU3% - 16% <> |
| 4K (Ultra HD) | CPU12% - 22% <> GPU0% - 6% <> | CPU12% - 22% <> GPU0% - 6% <> | CPU12% - 22% <> GPU0% - 6% <> | CPU2% - 9% <> GPU3% - 16% <> |
The A8-3530MX + GeForce RTX 4090 pairing runs this title with CPU utilization between 2% and 22% and GPU utilization between 0% and 16%. A8-3530MX keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 6% at 1080p to 5% at 4K, while CPU averages move from 14% to 14%.
Neither component is close to saturation: CPU tops out at 22% and GPU at 16%. This pattern suggests possible engine-side limits, an FPS cap, or workload constraints unrelated to raw hardware throughput. It also shows why low utilization does not automatically mean there is no FPS limiter.
At 1080p, averages sit around CPU 14% and GPU 6%. At 1440p, that shifts to CPU 14% and GPU 5%, and at 4K it reaches CPU 14% and GPU 5%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1080p (Full HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 6% (3-9%) and GPU 10% (3-16%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while A8-3530MX remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the A8-3530MX and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (54% below minimum). Expect performance issues. Low settings recommended.
-88%vsrecommended
+2070%vsrecommended
-54%vsminimum
+11414%vsminimum
The A8-3530MX and GeForce RTX 4090 will struggle to run Among Us at smooth framerates. At 1080p Ultra, you can expect around 34 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Among Us, upgrading the CPU would have the biggest impact on performance. The A8-3530MX is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Among Us does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Among Us requires at minimum a Core i3-4330 (CPU) and GeForce GT 610 (GPU) with 1 GB RAM and 250 MB storage. For the recommended experience, you need a Core i3-4330 and GeForce GTX 650 with 4 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Among Us FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
