Honkai: Star Rail
Being turn-based, extreme FPS is less critical here. The game features high-fidelity models and uses considerable storage for audio and cutscenes. 8GB of RAM is recommended for smooth operation.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 77 FPS. At 1440p, all settings exceed 72 FPS. At 4K, frame rates range from 57 to 67 FPS.
The Arc B570 is 40% above the recommended GPU (GeForce GTX 1060) for Honkai: Star Rail. The Ryzen 7 7800X3D is 59% above the recommended CPU (Core i7).
The Ryzen 7 7800X3D sets the FPS ceiling at all 1080p settings, all 1440p settings, 4k (low/medium), while the Arc B570 still has headroom. The FPS ceiling is closely matched at 4k (high/ultra).
Approximated average price on current market:
Combo price: $597.13. At 1080p Ultra, this combo delivers 77 FPS, equivalent to 0.13 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.149 fps/$ | 0.146 fps/$ | 0.134 fps/$ | 0.129 fps/$ |
| 1440p | 0.141 fps/$ | 0.137 fps/$ | 0.126 fps/$ | 0.121 fps/$ |
| 4k | 0.112 fps/$ | 0.111 fps/$ | 0.104 fps/$ | 0.095 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is the CPU.
The largest gap appears at 1080p Low, where the Ryzen 7 7800X3D reaches about 63 FPS, while the Arc B570 still has headroom up to roughly 90 FPS.
That means the Ryzen 7 7800X3D is hitting its performance ceiling first, leaving a 30% gap versus the Arc B570's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is CPU-limited in 10 out of 12 cases, with 0 GPU-limited and 2 balanced results.
Overall, this is a CPU-limited combination in this game.
The Ryzen 7 7800X3D is usually the limiting part in this game, so upgrading the CPU is more likely to deliver a larger FPS gain than upgrading the GPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Ryzen 7 7800X3D with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the Arc B570 with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 59% above and your GPU is 40% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+59%vsrecommended
+40%vsrecommended
+160%vsminimum
+701%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Arc B570 can run Honkai: Star Rail smoothly up to 1440p achieving around 72 FPS at Ultra quality. Your GPU is 40% above the recommended specs, and your CPU is 59% above the recommended requirements.
This CPU + GPU combo costs approximately $597.13 ($378.13 CPU + $219 GPU). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #4 for value).
For Honkai: Star Rail, upgrading the CPU would usually improve performance first. In the Performance Limiter Analysis, the Ryzen 7 7800X3D is the side that most often caps the frame rate, while the Arc B570 still has additional headroom in the tested presets. The main bottleneck appears on the CPU side. The largest gap shows up at 1080p Low, where the CPU reaches about 63 FPS while the GPU still has headroom up to roughly 90 FPS. Across all tested settings, the distribution is 0/12 GPU-limited, 10/12 CPU-limited, and 2/12 balanced.
Honkai: Star Rail does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Honkai: Star Rail requires at minimum a Core i3 (CPU) and GeForce GTX 650 (GPU) with 6 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 8 GB RAM. Your Ryzen 7 7800X3D and Arc B570 both exceed the recommended specs, so you're well-positioned for a great experience.
These Honkai: Star Rail FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
