Among Us
Extremely lightweight. The main requirement is a stable network connection. It runs on almost anything with a screen.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 3 to 5 FPS depending on quality settings. At 1440p, frame rates range from 2 to 4 FPS. At 4K, frame rates range from 1 to 3 FPS.
The GeForce 405 is 64% below minimum GPU requirement for Among Us. The Ryzen 7 7800X3D is 160% above the recommended CPU (Core i3-4330).
The GeForce 405 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $383.13. At 1080p Ultra, this combo delivers 3 FPS, equivalent to 0.01 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.013 fps/$ | 0.010 fps/$ | 0.010 fps/$ | 0.008 fps/$ |
| 1440p | 0.010 fps/$ | 0.008 fps/$ | 0.008 fps/$ | 0.005 fps/$ |
| 4k | 0.008 fps/$ | 0.005 fps/$ | 0.005 fps/$ | 0.003 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is clearly the GPU.
The largest gap appears at 4K Ultra, where the GeForce 405 reaches about 1 FPS, while the Ryzen 7 7800X3D still has headroom up to roughly 67 FPS.
That means the GeForce 405 is hitting its performance ceiling first, leaving a 99% gap versus the Ryzen 7 7800X3D's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is GPU-limited in 12 out of 12 cases, with 0 CPU-limited and 0 balanced results.
Overall, this is a clearly GPU-bound combination in this game.
The GeForce 405 is consistently the limiting part in this game, so upgrading the GPU is more likely to deliver a larger FPS gain than upgrading the CPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Ryzen 7 7800X3D with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce 405 with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (64% below minimum). Expect performance issues. Low settings recommended.
+160%vsrecommended
-93%vsrecommended
+885%vsminimum
-64%vsminimum
The Ryzen 7 7800X3D and GeForce 405 will struggle to run Among Us at smooth framerates. At 1080p Ultra, you can expect around 3 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $383.13 ($378.13 CPU + $5 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the Radeon RX 470 (móvel) for around $179 (Rank #318 for value) could deliver noticeably better performance.
For Among Us, upgrading the GPU would usually give you the most noticeable improvement. In the Performance Limiter Analysis, the GeForce 405 is the side that most often caps the frame rate, while the Ryzen 7 7800X3D still has additional headroom in the tested presets. The main bottleneck appears on the GPU side. The largest gap shows up at 4K Ultra, where the GPU reaches about 1 FPS while the CPU still has headroom up to roughly 67 FPS. Across all tested settings, the distribution is 12/12 GPU-limited, 0/12 CPU-limited, and 0/12 balanced.
Among Us does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Among Us requires at minimum a Core i3-4330 (CPU) and GeForce GT 610 (GPU) with 1 GB RAM and 250 MB storage. For the recommended experience, you need a Core i3-4330 and GeForce GTX 650 with 4 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Among Us FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
