VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 60 FPS. At 1440p, frame rates range from 51 to 83 FPS. At 4K, frame rates range from 26 to 39 FPS.
The GeForce GTX 1060 with Max-Q Design is 19% below minimum GPU requirement for Phasmophobia. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i5-10600).
The GeForce GTX 1060 with Max-Q Design sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $478.13. At 1080p Ultra, this combo delivers 60 FPS, equivalent to 0.13 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.247 fps/$ | 0.201 fps/$ | 0.172 fps/$ | 0.125 fps/$ |
| 1440p | 0.174 fps/$ | 0.146 fps/$ | 0.130 fps/$ | 0.107 fps/$ |
| 4k | 0.082 fps/$ | 0.071 fps/$ | 0.067 fps/$ | 0.054 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k ultra, the GeForce GTX 1060 with Max-Q Design sets the ceiling at about 30 FPS, while the Ryzen 7 7800X3D has headroom up to 203 FPS. In this scenario, the GPU limits the CPU potential by 85% (FPS gap: 173 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce GTX 1060 with Max-Q Design is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 68% | GPU Limits CPU 71% | GPU Limits CPU 74% | GPU Limits CPU 78% |
| 1440p (2K QHD) | GPU Limits CPU 75% | GPU Limits CPU 77% | GPU Limits CPU 78% | GPU Limits CPU 78% |
| 4K (Ultra HD) | GPU Limits CPU 82% | GPU Limits CPU 83% | GPU Limits CPU 84% | GPU Limits CPU 85% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (19% below minimum). Expect performance issues. Low settings recommended.
+94%vsrecommended
-45%vsrecommended
+161%vsminimum
-19%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce GTX 1060 with Max-Q Design can run Phasmophobia smoothly up to 1080p achieving around 60 FPS at Ultra quality. Your GPU is 45% below the recommended specs, and your CPU is 94% above the recommended requirements.
This CPU + GPU combo costs approximately $478.13 ($378.13 CPU + $100 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the Radeon RX 7700 for around $449 (Rank #373 for value) could deliver noticeably better performance.
For Phasmophobia, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX 1060 with Max-Q Design is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Phasmophobia does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
