Being turn-based, extreme FPS is less critical here. The game features high-fidelity models and uses considerable storage for audio and cutscenes. 8GB of RAM is recommended for smooth operation.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 27 to 104 FPS depending on quality settings. At 1440p, frame rates range from 27 to 95 FPS. At 4K, frame rates range from 11 to 46 FPS.
The GeForce GTX 770M SLI is 72% below recommended, but 60% above minimum for Honkai: Star Rail. The Ryzen 7 7800X3D is 59% above the recommended CPU (Core i7).
At lower resolutions (1080p (low/medium/high)), the Ryzen 7 7800X3D sets the FPS ceiling. As graphical load increases at (all 4k settings), the GeForce GTX 770M SLI becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p ultra, all 1440p settings.
Approximated average price on current market:
Combo price: $464. At 1080p Ultra, this combo delivers 27 FPS, equivalent to 0.06 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.224 fps/$ | 0.134 fps/$ | 0.088 fps/$ | 0.058 fps/$ |
| 1440p | 0.205 fps/$ | 0.127 fps/$ | 0.082 fps/$ | 0.058 fps/$ |
| 4k | 0.099 fps/$ | 0.058 fps/$ | 0.032 fps/$ | 0.024 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the GeForce GTX 770M SLI sets the ceiling at about 32 FPS, while the Ryzen 7 7800X3D has headroom up to 46 FPS. In this scenario, the GPU limits the CPU potential by 30% (FPS gap: 14 FPS). Overall distribution: GPU limits 5/12 cells, CPU limits 3/12, balanced 4/12.
Your GeForce GTX 770M SLI is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 26% | CPU Limits GPU 20% | CPU Limits GPU 13% | Balanced |
| 1440p (2K QHD) | Balanced | Balanced | Balanced | GPU Limits CPU 15% |
| 4K (Ultra HD) | GPU Limits CPU 21% | GPU Limits CPU 26% | GPU Limits CPU 24% | GPU Limits CPU 30% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 59% below recommended and your GPU is 72% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+59%vsrecommended
-72%vsrecommended
+160%vsminimum
+60%vsminimum
The Ryzen 7 7800X3D and GeForce GTX 770M SLI will struggle to run Honkai: Star Rail at smooth framerates. At 1080p Ultra, you can expect around 27 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $464 ($384 CPU + $80 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce GTX 1080 SLI (móvel) (Rank #2 for value) could deliver noticeably better performance.
For Honkai: Star Rail, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX 770M SLI is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 4k low, 4k medium, 4k high, 4k ultra. CPU-limited at: 1080p low, 1080p medium, 1080p high.
Honkai: Star Rail does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Honkai: Star Rail requires at minimum a Core i3 (CPU) and GeForce GTX 650 (GPU) with 6 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Honkai: Star Rail FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
