Being turn-based, extreme FPS is less critical here. The game features high-fidelity models and uses considerable storage for audio and cutscenes. 8GB of RAM is recommended for smooth operation.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 27 to 104 FPS depending on quality settings. At 1440p, frame rates range from 27 to 99 FPS. At 4K, frame rates range from 11 to 46 FPS.
The GeForce RTX 5070 Ti Mobile is 158% above the recommended GPU (GeForce GTX 1060) for Honkai: Star Rail. The Ryzen 7 7800X3D is 59% above the recommended CPU (Core i7).
At lower resolutions (all 1080p settings, all 1440p settings, 4k low), the Ryzen 7 7800X3D sets the FPS ceiling. As graphical load increases at (4k (high/ultra)), the GeForce RTX 5070 Ti Mobile becomes the FPS-limiting side. The FPS ceiling is closely matched at 4k medium.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the Ryzen 7 7800X3D sets the ceiling at about 93 FPS, while the GeForce RTX 5070 Ti Mobile could reach 174 FPS. In this scenario, the CPU limits the GPU potential by 47% (FPS gap: 81 FPS). Overall distribution: CPU limits 9/12 cells, GPU limits 2/12, balanced 1/12.
Your Ryzen 7 7800X3D is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 5070 Ti Mobile rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 47% | CPU Limits GPU 35% | CPU Limits GPU 18% | CPU Limits GPU 18% |
| 1440p (2K QHD) | CPU Limits GPU 38% | CPU Limits GPU 26% | CPU Limits GPU 12% | CPU Limits GPU 17% |
| 4K (Ultra HD) | CPU Limits GPU 26% | Balanced | GPU Limits CPU 18% | GPU Limits CPU 24% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 59% above and your GPU is 158% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+59%vsrecommended
+158%vsrecommended
+160%vsminimum
+1381%vsminimum
The Ryzen 7 7800X3D and GeForce RTX 5070 Ti Mobile will struggle to run Honkai: Star Rail at smooth framerates. At 1080p Ultra, you can expect around 27 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Honkai: Star Rail, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 7800X3D is currently the limiting factor — the GeForce RTX 5070 Ti Mobile has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low. GPU fully utilized at: 4k high, 4k ultra.
Honkai: Star Rail does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Honkai: Star Rail requires at minimum a Core i3 (CPU) and GeForce GTX 650 (GPU) with 6 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 8 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 5070 Ti Mobile both exceed the recommended specs, so you're well-positioned for a great experience.
These Honkai: Star Rail FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
