VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 262 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 240 FPS. At 4K, all settings exceed 157 FPS.
The Radeon RX 6950 XT is 96% above the recommended GPU (GeForce RTX 2060) for Phasmophobia. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i5-10600).
The Radeon RX 6950 XT sets the FPS ceiling at 1080p (medium/high/ultra), 1440p (medium/high/ultra), all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p low, 1440p low.
Approximated average price on current market:
Combo price: $1228.13. At 1080p Ultra, this combo delivers 262 FPS, equivalent to 0.21 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.327 fps/$ | 0.281 fps/$ | 0.260 fps/$ | 0.213 fps/$ |
| 1440p | 0.293 fps/$ | 0.256 fps/$ | 0.237 fps/$ | 0.195 fps/$ |
| 4k | 0.174 fps/$ | 0.161 fps/$ | 0.151 fps/$ | 0.128 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k ultra, the Radeon RX 6950 XT sets the ceiling at about 162 FPS, while the Ryzen 7 7800X3D has headroom up to 203 FPS. In this scenario, the GPU limits the CPU potential by 20% (FPS gap: 41 FPS). Overall distribution: GPU limits 10/12 cells, CPU limits 0/12, balanced 2/12.
Your Radeon RX 6950 XT is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | GPU Limits CPU 11% | GPU Limits CPU 16% | GPU Limits CPU 19% |
| 1440p (2K QHD) | Balanced | GPU Limits CPU 11% | GPU Limits CPU 16% | GPU Limits CPU 19% |
| 4K (Ultra HD) | GPU Limits CPU 11% | GPU Limits CPU 13% | GPU Limits CPU 18% | GPU Limits CPU 20% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 94% above and your GPU is 96% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+94%vsrecommended
+96%vsrecommended
+161%vsminimum
+191%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 6950 XT can run Phasmophobia smoothly up to 4k achieving around 157 FPS at Ultra quality. Your GPU is 96% above the recommended specs, and your CPU is 94% above the recommended requirements.
This CPU + GPU combo costs approximately $1228.13 ($378.13 CPU + $850 GPU). Your Radeon RX 6950 XT provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating. For example, upgrading to the GeForce RTX 4090 for around $1599 (Rank #363 for value) could deliver noticeably better performance.
Your Radeon RX 6950 XT is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Phasmophobia performance right now. GPU fully utilized at: 1080p medium, 1080p high, 1080p ultra, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Phasmophobia does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your Ryzen 7 7800X3D and Radeon RX 6950 XT both exceed the recommended specs, so you're well-positioned for a great experience.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
