VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 156 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 142 FPS. At 4K, all settings exceed 93 FPS.
The RadeonT RX 6850M XT is 2% below recommended, but 45% above minimum for Phasmophobia. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i5-10600).
The RadeonT RX 6850M XT sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $978.13. At 1080p Ultra, this combo delivers 156 FPS, equivalent to 0.16 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.256 fps/$ | 0.217 fps/$ | 0.191 fps/$ | 0.159 fps/$ |
| 1440p | 0.223 fps/$ | 0.192 fps/$ | 0.170 fps/$ | 0.145 fps/$ |
| 4k | 0.126 fps/$ | 0.117 fps/$ | 0.106 fps/$ | 0.095 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k high, the RadeonT RX 6850M XT sets the ceiling at about 118 FPS, while the Ryzen 7 7800X3D has headroom up to 240 FPS. In this scenario, the GPU limits the CPU potential by 51% (FPS gap: 122 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your RadeonT RX 6850M XT is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 32% | GPU Limits CPU 38% | GPU Limits CPU 44% | GPU Limits CPU 45% |
| 1440p (2K QHD) | GPU Limits CPU 35% | GPU Limits CPU 40% | GPU Limits CPU 45% | GPU Limits CPU 45% |
| 4K (Ultra HD) | GPU Limits CPU 46% | GPU Limits CPU 47% | GPU Limits CPU 51% | GPU Limits CPU 51% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 94% below recommended and your GPU is 2% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+94%vsrecommended
-2%vsrecommended
+161%vsminimum
+45%vsminimum
Yes, the Ryzen 7 7800X3D paired with the RadeonT RX 6850M XT can run Phasmophobia smoothly up to 4k achieving around 93 FPS at Ultra quality. Your GPU is 2% below the recommended specs, and your CPU is 94% above the recommended requirements.
This CPU + GPU combo costs approximately $978.13 ($378.13 CPU + $600 GPU). Your RadeonT RX 6850M XT is currently the main performance bottleneck and its market value ($600) is actually higher than newer, faster alternatives. Trading it or upgrading could yield immediate profit and performance gains. For example, upgrading to the Radeon RX 7700 for around $449 (Rank #373 for value) could deliver noticeably better performance while costing less than your current GPU.
For Phasmophobia, upgrading the GPU would give you the most noticeable improvement. The RadeonT RX 6850M XT is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Phasmophobia does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
