WarframeFPS onAtom x7809C&GeForce RTX 4090

Warframe

Runs on the incredibly optimized Evolution Engine. It can be heavy in open-world areas and CPU-limited in horde modes with many enemies, but generally runs well on a wide range of hardware.

Warframe - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low235 FPS
medium235 FPS
high235 FPS
ultra235 FPS
1440P
low235 FPS
medium235 FPS
high227 FPS
ultra178 FPS
4K
low206 FPS
medium161 FPS
high137 FPS
ultra100 FPS

Performance Report

Warframe

GeForce RTX 4090 + Atom x7809C
🎮Visual Experience

At 1080p, all quality settings exceed 235 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 178 FPS. At 4K, all settings exceed 100 FPS.

Official Requirements

The GeForce RTX 4090 is 657% above the recommended GPU (GeForce GTX 1050) for Warframe. The Atom x7809C is 22% above the recommended CPU (Core i5-4460).

⚙️FPS Ceiling Analysis

The Atom x7809C sets the FPS ceiling at all 1080p settings, all 1440p settings, 4k ultra, while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at 4k (low/medium/high).

Performance Limiter Analysis

Atom x7809C|GeForce RTX 4090

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 1080p low, the Atom x7809C sets the ceiling at about 235 FPS, while the GeForce RTX 4090 could reach 700 FPS. In this scenario, the CPU limits the GPU potential by 66% (FPS gap: 465 FPS). Overall distribution: CPU limits 10/12 cells, GPU limits 0/12, balanced 2/12.

Verdict

CPU Limits GPU

Your Atom x7809C is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 66%
MediumCPU Limits GPU 61%
HighCPU Limits GPU 53%
UltraCPU Limits GPU 43%
1440p (2K QHD)
LowCPU Limits GPU 39%
MediumCPU Limits GPU 26%
HighCPU Limits GPU 22%
UltraCPU Limits GPU 29%
4K (Ultra HD)
LowBalanced
MediumBalanced
HighCPU Limits GPU 6%
UltraCPU Limits GPU 11%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Atom x7809C and GeForce RTX 4090

1080p (Full HD)

Low
CPU40% - 65%
<>
GPU31% - 57%
<>
Medium
CPU40% - 65%
<>
GPU31% - 57%
<>
High
CPU35% - 64%
<>
GPU76% - 88%
<>
Ultra
CPU35% - 64%
<>
GPU76% - 88%
<>

1440p (2K QHD)

Low
CPU37% - 60%
<>
GPU46% - 60%
<>
Medium
CPU37% - 60%
<>
GPU46% - 60%
<>
High
CPU26% - 56%
<>
GPU92% - 97%
<>
Ultra
CPU26% - 56%
<>
GPU92% - 97%
<>

4K (Ultra HD)

Low
CPU31% - 41%
<>
GPU43% - 59%
<>
Medium
CPU31% - 41%
<>
GPU43% - 59%
<>
High
CPU19% - 39%
<>
GPU89% - 96%
<>
Ultra
CPU19% - 39%
<>
GPU89% - 96%
<>

Performance Summary

The Atom x7809C + GeForce RTX 4090 pairing runs this title with CPU utilization between 19% and 65% and GPU utilization between 31% and 97%. Atom x7809C keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 63% at 1080p to 72% at 4K, while CPU averages move from 51% to 33%.

Load Interpretation

From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the GeForce RTX 4090 averages 94% usage (92-97%), while the Atom x7809C stays at 41% (26-56%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 51% and GPU 63%. At 1440p, that shifts to CPU 45% and GPU 74%, and at 4K it reaches CPU 33% and GPU 72%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

4K (Ultra HD) High is the most balanced preset based on this dataset. It runs around CPU 29% (19-39%) and GPU 92% (89-96%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Atom x7809C remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Atom x7809C and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Warframe Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Atom x7809C
cpu icon
9,409
Your Score
MinimumCore i7-860
RecommendedCore i5-4460
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 650
RecommendedGeForce GTX 1050

Your CPU is 22% above and your GPU is 657% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.

CPU

+22%vsrecommended

GPU

+657%vsrecommended

CPU

+212%vsminimum

GPU

+2070%vsminimum

Minimum Requirements
Video Card: GeForce GTX 650
Processor: Core i7-860
Memory: 4 GB
Disk Space: 50 GB
System: Windows 7 64-bit
Recommended Requirements
Video Card: GeForce GTX 1050
Processor: Core i5-4460
Memory: 8 GB
Disk Space: 50 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Atom x7809C and GeForce RTX 4090 run Warframe well?

Yes, the Atom x7809C paired with the GeForce RTX 4090 can run Warframe smoothly up to 4k achieving around 100 FPS at Ultra quality. Your GPU is 657% above the recommended specs, and your CPU is 22% above the recommended requirements.

2Is there a more cost-effective setup to run Warframe?

Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.

3Which component should I upgrade first to improve Warframe performance?

For Warframe, upgrading the CPU would have the biggest impact on performance. The Atom x7809C is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k ultra.

4Does this setup support Frame Generation for Warframe?

Warframe does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Warframe?

Warframe requires at minimum a Core i7-860 (CPU) and GeForce GTX 650 (GPU) with 4 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-4460 and GeForce GTX 1050 with 8 GB RAM. Your Atom x7809C and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Warframe FPS estimates for the Atom x7809C and GeForce RTX 4090?

These Warframe FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.