Being turn-based, extreme FPS is less critical here. The game features high-fidelity models and uses considerable storage for audio and cutscenes. 8GB of RAM is recommended for smooth operation.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, performance runs at around 19 FPS. At 1440p, performance is around 19 FPS. At 4K, performance is around 19 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Honkai: Star Rail. The Celeron B820 is 94% below minimum CPU requirement.
The Celeron B820 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1664. At 1080p Ultra, this combo delivers 19 FPS, equivalent to 0.01 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.011 fps/$ | 0.011 fps/$ | 0.011 fps/$ | 0.011 fps/$ |
| 1440p | 0.011 fps/$ | 0.011 fps/$ | 0.011 fps/$ | 0.011 fps/$ |
| 4k | 0.011 fps/$ | 0.011 fps/$ | 0.011 fps/$ | 0.011 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k low, the Celeron B820 sets the ceiling at about 19 FPS, while the GeForce RTX 4090 could reach 144 FPS. In this scenario, the CPU limits the GPU potential by 87% (FPS gap: 125 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Celeron B820 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 85% | CPU Limits GPU 85% | CPU Limits GPU 83% | CPU Limits GPU 83% |
| 1440p (2K QHD) | CPU Limits GPU 85% | CPU Limits GPU 85% | CPU Limits GPU 82% | CPU Limits GPU 82% |
| 4K (Ultra HD) | CPU Limits GPU 87% | CPU Limits GPU 86% | CPU Limits GPU 82% | CPU Limits GPU 79% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU62% - 90% <> GPU47% - 63% <> | CPU62% - 92% <> GPU47% - 64% <> | CPU62% - 92% <> GPU47% - 64% <> | CPU64% - 92% <> GPU47% - 64% <> |
| 1440p (2K QHD) | CPU62% - 90% <> GPU59% - 75% <> | CPU62% - 92% <> GPU59% - 76% <> | CPU62% - 92% <> GPU59% - 76% <> | CPU63% - 92% <> GPU59% - 76% <> |
| 4K (Ultra HD) | CPU62% - 90% <> GPU61% - 76% <> | CPU62% - 92% <> GPU60% - 76% <> | CPU62% - 92% <> GPU60% - 76% <> | CPU64% - 92% <> GPU60% - 76% <> |
The Celeron B820 + GeForce RTX 4090 pairing runs this title with CPU utilization between 62% and 92% and GPU utilization between 47% and 76%. Celeron B820 stays in a controlled operating range, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 56% at 1080p to 68% at 4K, while CPU averages move from 77% to 77%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 68% average at its highest-load preset, while the Celeron B820 peaks at 78% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 77% and GPU 56%. At 1440p, that shifts to CPU 77% and GPU 68%, and at 4K it reaches CPU 77% and GPU 68%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.
4K (Ultra HD) Low is the most balanced preset based on this dataset. It runs around CPU 76% (62-90%) and GPU 68% (61-76%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Celeron B820 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Celeron B820 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (94% below minimum). Expect performance issues. Low settings recommended.
-96%vsrecommended
+279%vsrecommended
-94%vsminimum
+2070%vsminimum
The Celeron B820 and GeForce RTX 4090 will struggle to run Honkai: Star Rail at smooth framerates. At 1080p Ultra, you can expect around 19 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $1664 ($15 CPU + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 7845HX is a great upgrade option (Rank #1 for value).
For Honkai: Star Rail, upgrading the CPU would have the biggest impact on performance. The Celeron B820 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Honkai: Star Rail does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Honkai: Star Rail requires at minimum a Core i3 (CPU) and GeForce GTX 650 (GPU) with 6 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 8 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Honkai: Star Rail FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
