The Sims 4FPS onCore i3-4360&GeForce RTX 4090

The Sims 4

Optimized to run on laptops, it is largely CPU-limited by the simulation. Installing many DLCs and expansions significantly increases RAM and storage load.

The Sims 4 - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low91 FPS
medium91 FPS
high91 FPS
ultra91 FPS
1440P
low91 FPS
medium91 FPS
high91 FPS
ultra91 FPS
4K
low91 FPS
medium91 FPS
high91 FPS
ultra91 FPS

Performance Report

The Sims 4

GeForce RTX 4090 + Core i3-4360
🎮Visual Experience

At 1080p, all quality settings exceed 91 FPS. At 1440p, all settings exceed 91 FPS. At 4K, all settings exceed 91 FPS.

Official Requirements

The GeForce RTX 4090 is 2070% above the recommended GPU (GeForce GTX 650) for The Sims 4. The Core i3-4360 is 43% below minimum CPU requirement.

⚙️FPS Ceiling Analysis

The Core i3-4360 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.

Performance Limiter Analysis

Core i3-4360|GeForce RTX 4090

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 1440p low, the Core i3-4360 sets the ceiling at about 91 FPS, while the GeForce RTX 4090 could reach 363 FPS. In this scenario, the CPU limits the GPU potential by 75% (FPS gap: 272 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.

Verdict

CPU Limits GPU

Your Core i3-4360 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 74%
MediumCPU Limits GPU 71%
HighCPU Limits GPU 68%
UltraCPU Limits GPU 64%
1440p (2K QHD)
LowCPU Limits GPU 75%
MediumCPU Limits GPU 74%
HighCPU Limits GPU 70%
UltraCPU Limits GPU 65%
4K (Ultra HD)
LowCPU Limits GPU 67%
MediumCPU Limits GPU 66%
HighCPU Limits GPU 62%
UltraCPU Limits GPU 54%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Core i3-4360 and GeForce RTX 4090

1080p (Full HD)

Low
CPU14% - 29%
<>
GPU9% - 34%
<>
Medium
CPU14% - 29%
<>
GPU9% - 34%
<>
High
CPU14% - 29%
<>
GPU9% - 34%
<>
Ultra
CPU14% - 29%
<>
GPU9% - 34%
<>

1440p (2K QHD)

Low
CPU13% - 29%
<>
GPU10% - 37%
<>
Medium
CPU13% - 29%
<>
GPU10% - 37%
<>
High
CPU13% - 29%
<>
GPU10% - 37%
<>
Ultra
CPU13% - 29%
<>
GPU10% - 37%
<>

4K (Ultra HD)

Low
CPU13% - 29%
<>
GPU10% - 37%
<>
Medium
CPU13% - 29%
<>
GPU10% - 37%
<>
High
CPU13% - 29%
<>
GPU10% - 37%
<>
Ultra
CPU13% - 29%
<>
GPU10% - 37%
<>

Performance Summary

The Core i3-4360 + GeForce RTX 4090 pairing runs this title with CPU utilization between 13% and 29% and GPU utilization between 9% and 37%. Core i3-4360 keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 22% at 1080p to 24% at 4K, while CPU averages move from 22% to 21%.

Load Interpretation

Neither component is close to saturation: CPU tops out at 29% and GPU at 37%. This pattern suggests possible engine-side limits, an FPS cap, or workload constraints unrelated to raw hardware throughput. It also shows why low utilization does not automatically mean there is no FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 22% and GPU 22%. At 1440p, that shifts to CPU 21% and GPU 24%, and at 4K it reaches CPU 21% and GPU 24%. This shows that workload scaling is limited, which can indicate engine-side constraints.

Optimal Settings Recommendation

1440p (2K QHD) Low is the most balanced preset based on this dataset. It runs around CPU 21% (13-29%) and GPU 24% (10-37%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i3-4360 remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Core i3-4360 and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

The Sims 4 Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Core i3-4360
cpu icon
3,639
Your Score
MinimumCore i3-3220
RecommendedCore i5-4460
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce 6600
RecommendedGeForce GTX 650

Your hardware is below minimum requirements. CPU is the limiting factor (43% below minimum). Expect performance issues. Low settings recommended.

CPU

-70%vsrecommended

GPU

+2070%vsrecommended

CPU

-43%vsminimum

GPU

+81%vsminimum

Minimum Requirements
Video Card: GeForce 6600
Processor: Core i3-3220
Memory: 4 GB
Disk Space: 25 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 650
Processor: Core i5-4460
Memory: 8 GB
Disk Space: 50 GB
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Core i3-4360 and GeForce RTX 4090 run The Sims 4 well?

Yes, the Core i3-4360 paired with the GeForce RTX 4090 can run The Sims 4 smoothly up to 4k achieving around 91 FPS at Ultra quality. Your GPU is 2070% above the recommended specs, and your CPU is 70% below the recommended requirements.

2Is there a more cost-effective setup to run The Sims 4?

Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.

3Which component should I upgrade first to improve The Sims 4 performance?

For The Sims 4, upgrading the CPU would have the biggest impact on performance. The Core i3-4360 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for The Sims 4?

The Sims 4 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for The Sims 4?

The Sims 4 requires at minimum a Core i3-3220 (CPU) and GeForce 6600 (GPU) with 4 GB RAM and 25 GB storage. For the recommended experience, you need a Core i5-4460 and GeForce GTX 650 with 8 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.

6How accurate are these The Sims 4 FPS estimates for the Core i3-4360 and GeForce RTX 4090?

These The Sims 4 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.