VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 294 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 248 FPS. At 4K, all settings exceed 155 FPS.
The GeForce RTX 4090 is 167% above the recommended GPU (GeForce RTX 2060) for Phasmophobia. The Core i5-11400F is 4% below recommended, but 29% above minimum.
The GeForce RTX 4090 sets the FPS ceiling at 1080p (medium/high/ultra), all 1440p settings, all 4k settings, while the Core i5-11400F still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p low.
Approximated average price on current market:
Combo price: $1759. At 1080p Ultra, this combo delivers 294 FPS, equivalent to 0.17 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.240 fps/$ | 0.240 fps/$ | 0.204 fps/$ | 0.167 fps/$ |
| 1440p | 0.234 fps/$ | 0.219 fps/$ | 0.185 fps/$ | 0.141 fps/$ |
| 4k | 0.137 fps/$ | 0.141 fps/$ | 0.112 fps/$ | 0.088 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the GeForce RTX 4090 sets the ceiling at about 176 FPS, while the Core i5-11400F has headroom up to 248 FPS. In this scenario, the GPU limits the CPU potential by 29% (FPS gap: 72 FPS). Overall distribution: GPU limits 11/12 cells, CPU limits 0/12, balanced 1/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Core i5-11400F frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | GPU Limits CPU 7% | GPU Limits CPU 8% | GPU Limits CPU 6% |
| 1440p (2K QHD) | GPU Limits CPU 6% | GPU Limits CPU 10% | GPU Limits CPU 8% | GPU Limits CPU 7% |
| 4K (Ultra HD) | GPU Limits CPU 26% | GPU Limits CPU 29% | GPU Limits CPU 28% | GPU Limits CPU 25% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU0% - 21% <> GPU47% - 86% <> | CPU0% - 21% <> GPU47% - 86% <> | CPU13% - 41% <> GPU79% - 99% <> | CPU22% - 47% <> GPU87% - 97% <> |
| 1440p (2K QHD) | CPU0% - 8% <> GPU50% - 86% <> | CPU0% - 8% <> GPU50% - 86% <> | CPU5% - 19% <> GPU86% - 99% <> | CPU6% - 21% <> GPU91% - 94% <> |
| 4K (Ultra HD) | CPU0% - 9% <> GPU50% - 87% <> | CPU0% - 9% <> GPU50% - 87% <> | CPU5% - 21% <> GPU88% - 100% <> | CPU7% - 24% <> GPU99% - 100% <> |
The Core i5-11400F + GeForce RTX 4090 pairing runs this title with CPU utilization between 0% and 47% and GPU utilization between 47% and 100%. Core i5-11400F keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 78% at 1080p to 83% at 4K, while CPU averages move from 20% to 9%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Ultra, the GeForce RTX 4090 averages 100% usage (99-100%), while the Core i5-11400F stays at 16% (7-24%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 20% and GPU 78%. At 1440p, that shifts to CPU 9% and GPU 80%, and at 4K it reaches CPU 9% and GPU 83%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) High is the most balanced preset based on this dataset. It runs around CPU 27% (13-41%) and GPU 89% (79-99%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i5-11400F remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 100% average load at 4K (Ultra HD) Ultra while the Core i5-11400F still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 4% below recommended and your GPU is 167% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-4%vsrecommended
+167%vsrecommended
+29%vsminimum
+295%vsminimum
Yes, the Core i5-11400F paired with the GeForce RTX 4090 can run Phasmophobia smoothly up to 4k achieving around 155 FPS at Ultra quality. Your GPU is 167% above the recommended specs, and your CPU is 4% below the recommended requirements.
This CPU + GPU combo costs approximately $1759 ($110 CPU (Rank #56 Value) + $1649 GPU (Rank #77 Value)). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Phasmophobia performance right now. GPU fully utilized at: 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Phasmophobia does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
