Being turn-based, extreme FPS is less critical here. The game features high-fidelity models and uses considerable storage for audio and cutscenes. 8GB of RAM is recommended for smooth operation.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 69 FPS. At 1440p, frame rates range from 59 to 95 FPS. At 4K, frame rates range from 43 to 72 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Honkai: Star Rail. The Core i5-1340P is 14% below recommended, but 41% above minimum.
The Core i5-1340P sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the Core i5-1340P sets the ceiling at about 61 FPS, while the GeForce RTX 4090 could reach 114 FPS. In this scenario, the CPU limits the GPU potential by 46% (FPS gap: 53 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Core i5-1340P is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 27% | CPU Limits GPU 31% | CPU Limits GPU 29% | CPU Limits GPU 38% |
| 1440p (2K QHD) | CPU Limits GPU 23% | CPU Limits GPU 28% | CPU Limits GPU 28% | CPU Limits GPU 37% |
| 4K (Ultra HD) | CPU Limits GPU 41% | CPU Limits GPU 46% | CPU Limits GPU 44% | CPU Limits GPU 43% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU9% - 23% <> GPU30% - 49% <> | CPU12% - 25% <> GPU30% - 50% <> | CPU12% - 25% <> GPU30% - 50% <> | CPU14% - 26% <> GPU30% - 49% <> |
| 1440p (2K QHD) | CPU8% - 23% <> GPU42% - 59% <> | CPU11% - 25% <> GPU42% - 59% <> | CPU11% - 25% <> GPU42% - 59% <> | CPU13% - 25% <> GPU42% - 59% <> |
| 4K (Ultra HD) | CPU7% - 23% <> GPU50% - 64% <> | CPU11% - 25% <> GPU50% - 64% <> | CPU11% - 25% <> GPU50% - 64% <> | CPU13% - 25% <> GPU50% - 64% <> |
The Core i5-1340P + GeForce RTX 4090 pairing runs this title with CPU utilization between 7% and 26% and GPU utilization between 30% and 64%. Core i5-1340P keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 40% at 1080p to 57% at 4K, while CPU averages move from 18% to 18%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 57% average at its highest-load preset, while the Core i5-1340P peaks at 20% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 18% and GPU 40%. At 1440p, that shifts to CPU 18% and GPU 50%, and at 4K it reaches CPU 18% and GPU 57%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.
4K (Ultra HD) Low is the most balanced preset based on this dataset. It runs around CPU 15% (7-23%) and GPU 57% (50-64%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i5-1340P remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Core i5-1340P and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 14% below recommended and your GPU is 279% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-14%vsrecommended
+279%vsrecommended
+41%vsminimum
+2070%vsminimum
Yes, the Core i5-1340P paired with the GeForce RTX 4090 can run Honkai: Star Rail smoothly up to 1080p achieving around 69 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 14% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Honkai: Star Rail, upgrading the CPU would have the biggest impact on performance. The Core i5-1340P is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Honkai: Star Rail does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Honkai: Star Rail requires at minimum a Core i3 (CPU) and GeForce GTX 650 (GPU) with 6 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Honkai: Star Rail FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
