1Can the EPYC 4464P and GeForce RTX 4090 run Warframe well?
The EPYC 4464P and GeForce RTX 4090 will struggle to run Warframe at smooth framerates.
WarframeFPS onEPYC 4464P&GeForce RTX 4090
Warframe
Runs on the incredibly optimized Evolution Engine. It can be heavy in open-world areas and CPU-limited in horde modes with many enemies, but generally runs well on a wide range of hardware.
Performance Report
Warframe
GeForce RTX 4090 + EPYC 4464P
🎮Visual Experience
✅Official Requirements
The GeForce RTX 4090 is 657% above the recommended GPU (GeForce GTX 1050) for Warframe. The EPYC 4464P is 510% above the recommended CPU (Core i5-4460).
✅FPS Ceiling Analysis
No major FPS-ceiling mismatch detected. The GeForce RTX 4090 and EPYC 4464P stay close in effective frame-generation ceiling across the tested resolutions and quality settings.
💰Value Analysis
Performance Limiter Analysis
EPYC 4464P|GeForce RTX 4090
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
📈Analysis
No limiter data is currently available for Warframe.
✅Verdict
Well Balanced
The EPYC 4464P and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
🧩Detailed Breakdown
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | - | - | - | - |
| 1440p (2K QHD) | - | - | - | - |
| 4K (Ultra HD) | - | - | - | - |
1080p (Full HD)
1440p (2K QHD)
4K (Ultra HD)
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
📊Predicted Hardware Utilization for EPYC 4464P and GeForce RTX 4090
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU11% - 55% <> GPU45% - 82% <> | CPU11% - 55% <> GPU45% - 82% <> | CPU21% - 63% <> GPU55% - 87% <> | CPU21% - 63% <> GPU55% - 87% <> |
| 1440p (2K QHD) | CPU18% - 53% <> GPU46% - 84% <> | CPU18% - 53% <> GPU46% - 84% <> | CPU22% - 57% <> GPU79% - 100% <> | CPU22% - 57% <> GPU79% - 100% <> |
| 4K (Ultra HD) | CPU11% - 35% <> GPU42% - 82% <> | CPU11% - 35% <> GPU42% - 82% <> | CPU15% - 40% <> GPU75% - 100% <> | CPU15% - 40% <> GPU75% - 100% <> |
1080p (Full HD)
Low
CPU11% - 55%
<>
GPU45% - 82%
<>
Medium
CPU11% - 55%
<>
GPU45% - 82%
<>
High
CPU21% - 63%
<>
GPU55% - 87%
<>
Ultra
CPU21% - 63%
<>
GPU55% - 87%
<>
1440p (2K QHD)
Low
CPU18% - 53%
<>
GPU46% - 84%
<>
Medium
CPU18% - 53%
<>
GPU46% - 84%
<>
High
CPU22% - 57%
<>
GPU79% - 100%
<>
Ultra
CPU22% - 57%
<>
GPU79% - 100%
<>
4K (Ultra HD)
Low
CPU11% - 35%
<>
GPU42% - 82%
<>
Medium
CPU11% - 35%
<>
GPU42% - 82%
<>
High
CPU15% - 40%
<>
GPU75% - 100%
<>
Ultra
CPU15% - 40%
<>
GPU75% - 100%
<>
Performance Summary
The EPYC 4464P + GeForce RTX 4090 pairing runs this title with CPU utilization between 11% and 63% and GPU utilization between 42% and 100%. EPYC 4464P keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 68% at 1080p to 75% at 4K, while CPU averages move from 38% to 26%.
Load Interpretation
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the GeForce RTX 4090 averages 90% usage (79-100%), while the EPYC 4464P stays at 40% (22-57%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
Resolution Scaling
At 1080p, averages sit around CPU 38% and GPU 68%. At 1440p, that shifts to CPU 38% and GPU 78%, and at 4K it reaches CPU 26% and GPU 75%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
Optimal Settings Recommendation
4K (Ultra HD) High is the most balanced preset based on this dataset. It runs around CPU 28% (15-40%) and GPU 88% (75-100%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while EPYC 4464P remains stable for consistent frame delivery.
Upgrade Insight
Current utilization does not show an urgent upgrade requirement for either component; the EPYC 4464P and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
- High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
- High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
- Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
Warframe Requirements Comparison
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
CPU - EPYC 4464P
47,185
Your Score
MinimumCore i7-860
RecommendedCore i5-4460
GPU - GeForce RTX 4090
38,112
Your Score
MinimumGeForce GTX 650
RecommendedGeForce GTX 1050
Your CPU is 510% above and your GPU is 657% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+510%vsrecommended
+657%vsrecommended
+1467%vsminimum
+2070%vsminimum
Minimum Requirements
Video Card: GeForce GTX 650
Processor: Core i7-860
Memory: 4 GB
Disk Space: 50 GB
System: Windows 7 64-bit
Recommended Requirements
Video Card: GeForce GTX 1050
Processor: Core i5-4460
Memory: 8 GB
Disk Space: 50 GB (SSD)
System: Windows 10 64-bit
Frequently Asked Questions
2Is there a more cost-effective setup to run Warframe?
This CPU + GPU combo costs approximately $2099 ($450 CPU (Rank #62 Value) + $1649 GPU (Rank #77 Value)). This is a well-balanced setup, meaning you're getting good value from both components without significant waste.
3Which component should I upgrade first to improve Warframe performance?
This setup is already well-balanced for Warframe. No significant bottleneck - CPU and GPU are well matched across all settings. Both the EPYC 4464P and GeForce RTX 4090 complement each other effectively, so upgrading either component individually would yield diminishing returns. If you want more FPS, you'd benefit most from upgrading both CPU and GPU together.
4Does this setup support Frame Generation for Warframe?
Warframe does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
5What are the minimum and recommended specs for Warframe?
Warframe requires at minimum a Core i7-860 (CPU) and GeForce GTX 650 (GPU) with 4 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-4460 and GeForce GTX 1050 with 8 GB RAM. Your EPYC 4464P and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
6How accurate are these Warframe FPS estimates for the EPYC 4464P and GeForce RTX 4090?
These Warframe FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.