Extremely lightweight. The main requirement is a stable network connection. It runs on almost anything with a screen.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 155 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 127 FPS. At 4K, all settings exceed 116 FPS.
The GeForce RTX 4090 is 2070% above the recommended GPU (GeForce GTX 650) for Among Us. The EPYC 7303 is 116% above the recommended CPU (Core i3-4330).
The EPYC 7303 determines the performance ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GPU has headroom.
At 1080p ultra, the EPYC 7303 sets the ceiling at about 109 FPS, while the GeForce RTX 4090 could reach 291 FPS. In this scenario, the CPU limits the GPU potential by 63% (FPS gap: 182 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your EPYC 7303 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 58% | CPU Limits GPU 59% | CPU Limits GPU 61% | CPU Limits GPU 63% |
| 1440p (2K QHD) | CPU Limits GPU 27% | CPU Limits GPU 28% | CPU Limits GPU 30% | CPU Limits GPU 30% |
| 4K (Ultra HD) | CPU Limits GPU 27% | CPU Limits GPU 27% | CPU Limits GPU 30% | CPU Limits GPU 30% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 116% above and your GPU is 2070% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+116%vsrecommended
+2070%vsrecommended
+721%vsminimum
+11414%vsminimum
Yes, the EPYC 7303 paired with the GeForce RTX 4090 can run Among Us smoothly up to 4k achieving around 118 FPS at Ultra quality. Your GPU is 2070% above the recommended specs, and your CPU is 116% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Among Us, upgrading the CPU would have the biggest impact on performance. The EPYC 7303 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Among Us does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Among Us requires at minimum a Core i3-4330 (CPU) and GeForce GT 610 (GPU) with 1 GB RAM and 250 MB storage. For the recommended experience, you need a Core i3-4330 and GeForce GTX 650 with 4 GB RAM. Your EPYC 7303 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Among Us FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
