Being turn-based, extreme FPS is less critical here. The game features high-fidelity models and uses considerable storage for audio and cutscenes. 8GB of RAM is recommended for smooth operation.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 60 FPS. At 1440p, frame rates range from 55 to 59 FPS. At 4K, frame rates range from 52 to 66 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Honkai: Star Rail. The EPYC 9135 is 168% above the recommended CPU (Core i7).
The EPYC 9135 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1744. At 1080p Ultra, this combo delivers 60 FPS, equivalent to 0.03 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.036 fps/$ | 0.035 fps/$ | 0.037 fps/$ | 0.034 fps/$ |
| 1440p | 0.034 fps/$ | 0.032 fps/$ | 0.033 fps/$ | 0.032 fps/$ |
| 4k | 0.038 fps/$ | 0.035 fps/$ | 0.033 fps/$ | 0.030 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p medium, the EPYC 9135 sets the ceiling at about 54 FPS, while the GeForce RTX 4090 could reach 119 FPS. In this scenario, the CPU limits the GPU potential by 55% (FPS gap: 65 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your EPYC 9135 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 50% | CPU Limits GPU 52% | CPU Limits GPU 41% | CPU Limits GPU 46% |
| 1440p (2K QHD) | CPU Limits GPU 51% | CPU Limits GPU 55% | CPU Limits GPU 45% | CPU Limits GPU 47% |
| 4K (Ultra HD) | CPU Limits GPU 51% | CPU Limits GPU 53% | CPU Limits GPU 45% | CPU Limits GPU 42% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU3% - 16% <> GPU32% - 57% <> | CPU6% - 16% <> GPU32% - 55% <> | CPU6% - 16% <> GPU32% - 55% <> | CPU8% - 16% <> GPU30% - 49% <> |
| 1440p (2K QHD) | CPU4% - 16% <> GPU36% - 59% <> | CPU7% - 17% <> GPU36% - 56% <> | CPU7% - 17% <> GPU36% - 56% <> | CPU9% - 17% <> GPU34% - 51% <> |
| 4K (Ultra HD) | CPU4% - 16% <> GPU46% - 65% <> | CPU7% - 17% <> GPU46% - 63% <> | CPU7% - 17% <> GPU46% - 63% <> | CPU9% - 17% <> GPU45% - 65% <> |
The EPYC 9135 + GeForce RTX 4090 pairing runs this title with CPU utilization between 3% and 17% and GPU utilization between 30% and 65%. EPYC 9135 keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 43% at 1080p to 55% at 4K, while CPU averages move from 11% to 12%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 56% average at its highest-load preset, while the EPYC 9135 peaks at 13% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 11% and GPU 43%. At 1440p, that shifts to CPU 12% and GPU 46%, and at 4K it reaches CPU 12% and GPU 55%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.
4K (Ultra HD) Low is the most balanced preset based on this dataset. It runs around CPU 10% (4-16%) and GPU 56% (46-65%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while EPYC 9135 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the EPYC 9135 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 168% above and your GPU is 279% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+168%vsrecommended
+279%vsrecommended
+338%vsminimum
+2070%vsminimum
Yes, the EPYC 9135 paired with the GeForce RTX 4090 can run Honkai: Star Rail smoothly up to 1080p achieving around 60 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 168% above the recommended requirements.
This CPU + GPU combo costs approximately $1744 ($95 CPU (Rank #226 Value) + $1649 GPU (Rank #77 Value)). Your EPYC 9135 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end processor with a significantly better value rating. For example, the EPYC 9355P is a great upgrade option for around $2998 (Rank #287 for value).
Your EPYC 9135 is already an incredibly powerful processor. While it's technically the first component to hit its limit (which is completely normal in state-of-the-art builds), there is no meaningful upgrade path that would drastically improve your Honkai: Star Rail performance right now. CPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Honkai: Star Rail does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Honkai: Star Rail requires at minimum a Core i3 (CPU) and GeForce GTX 650 (GPU) with 6 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 8 GB RAM. Your EPYC 9135 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Honkai: Star Rail FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
