Warframe
Runs on the incredibly optimized Evolution Engine. It can be heavy in open-world areas and CPU-limited in horde modes with many enemies, but generally runs well on a wide range of hardware.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 377 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 348 FPS. At 4K, all settings exceed 152 FPS.
The GeForce RTX 5090 is 672% above the recommended GPU (GeForce GTX 1050) for Warframe. The EPYC 9374F is 961% above the recommended CPU (Core i5-4460).
No major FPS-ceiling mismatch detected. The GeForce RTX 5090 and EPYC 9374F stay close in effective frame-generation ceiling across the tested resolutions and quality settings.
Approximated average price on current market:
Combo price: $6166. At 1080p Ultra, this combo delivers 377 FPS, equivalent to 0.06 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.137 fps/$ | 0.114 fps/$ | 0.085 fps/$ | 0.061 fps/$ |
| 1440p | 0.112 fps/$ | 0.099 fps/$ | 0.076 fps/$ | 0.056 fps/$ |
| 4k | 0.042 fps/$ | 0.038 fps/$ | 0.030 fps/$ | 0.025 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, there is no clear winner.
The largest gap still appears at 4K Low, where the GeForce RTX 5090 reaches about 237 FPS, while the EPYC 9374F still has headroom up to roughly 262 FPS.
That means neither part is consistently hitting its ceiling far ahead of the other. Across all tested settings, this pairing is GPU-limited in 6 out of 12 cases, CPU-limited in 0, and balanced in 6.
Overall, this is a balanced combination in this game.
Neither the EPYC 9374F nor the GeForce RTX 5090 stands out as the consistent limiter in this game, so the better upgrade depends more on your target settings than on one obvious bottleneck.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the EPYC 9374F with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 5090 with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 961% above and your GPU is 672% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+961%vsrecommended
+672%vsrecommended
+2624%vsminimum
+2113%vsminimum
Yes, the EPYC 9374F paired with the GeForce RTX 5090 can run Warframe smoothly up to 4k achieving around 152 FPS at Ultra quality. Your GPU is 672% above the recommended specs, and your CPU is 961% above the recommended requirements.
This CPU + GPU combo costs approximately $6,166 ($3,466 CPU + $2,700 GPU). This is a well-balanced setup, meaning you're getting good value from both components without significant waste.
This setup is already well-balanced for Warframe. In the Performance Limiter Analysis, neither side consistently defines the maximum FPS across the tested presets. Across all tested settings, the distribution is 6/12 GPU-limited, 0/12 CPU-limited, and 6/12 balanced. In practice, this pairing behaves as a well-balanced combination in this game. Because of that, upgrading only one component would usually bring smaller gains than improving the overall pairing.
Warframe does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Warframe requires at minimum a Core i7-860 (CPU) and GeForce GTX 650 (GPU) with 4 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-4460 and GeForce GTX 1050 with 8 GB RAM. Your EPYC 9374F and GeForce RTX 5090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Warframe FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
