Runs on the incredibly optimized Evolution Engine. It can be heavy in open-world areas and CPU-limited in horde modes with many enemies, but generally runs well on a wide range of hardware.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 267 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 216 FPS. At 4K, all settings exceed 107 FPS.
The GeForce RTX 4090 is 657% above the recommended GPU (GeForce GTX 1050) for Warframe. The EPYC 9554 is 1250% above the recommended CPU (Core i5-4460).
The EPYC 9554 sets the FPS ceiling at all 1080p settings, all 1440p settings, 4k ultra, while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at 4k (low/medium/high).
Approximated average price on current market:
Combo price: $4444. At 1080p Ultra, this combo delivers 267 FPS, equivalent to 0.06 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.114 fps/$ | 0.097 fps/$ | 0.077 fps/$ | 0.060 fps/$ |
| 1440p | 0.077 fps/$ | 0.064 fps/$ | 0.057 fps/$ | 0.049 fps/$ |
| 4k | 0.047 fps/$ | 0.038 fps/$ | 0.032 fps/$ | 0.024 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p ultra, the EPYC 9554 sets the ceiling at about 265 FPS, while the GeForce RTX 4090 could reach 406 FPS. In this scenario, the CPU limits the GPU potential by 35% (FPS gap: 141 FPS). Overall distribution: CPU limits 9/12 cells, GPU limits 0/12, balanced 3/12.
Your EPYC 9554 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 28% | CPU Limits GPU 28% | CPU Limits GPU 32% | CPU Limits GPU 35% |
| 1440p (2K QHD) | CPU Limits GPU 13% | CPU Limits GPU 12% | CPU Limits GPU 17% | CPU Limits GPU 18% |
| 4K (Ultra HD) | Balanced | Balanced | Balanced | CPU Limits GPU 8% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU24% - 54% <> GPU31% - 60% <> | CPU24% - 54% <> GPU31% - 60% <> | CPU26% - 62% <> GPU66% - 77% <> | CPU26% - 62% <> GPU66% - 77% <> |
| 1440p (2K QHD) | CPU21% - 49% <> GPU49% - 64% <> | CPU21% - 49% <> GPU49% - 64% <> | CPU16% - 53% <> GPU92% - 96% <> | CPU16% - 53% <> GPU92% - 96% <> |
| 4K (Ultra HD) | CPU14% - 30% <> GPU45% - 62% <> | CPU14% - 30% <> GPU45% - 62% <> | CPU10% - 37% <> GPU88% - 94% <> | CPU10% - 37% <> GPU88% - 94% <> |
The EPYC 9554 + GeForce RTX 4090 pairing runs this title with CPU utilization between 10% and 62% and GPU utilization between 31% and 96%. EPYC 9554 keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 59% at 1080p to 73% at 4K, while CPU averages move from 42% to 23%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the GeForce RTX 4090 averages 94% usage (92-96%), while the EPYC 9554 stays at 34% (16-53%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 42% and GPU 59%. At 1440p, that shifts to CPU 35% and GPU 75%, and at 4K it reaches CPU 23% and GPU 73%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
4K (Ultra HD) High is the most balanced preset based on this dataset. It runs around CPU 24% (10-37%) and GPU 91% (88-94%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while EPYC 9554 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the EPYC 9554 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 1250% above and your GPU is 657% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+1250%vsrecommended
+657%vsrecommended
+3365%vsminimum
+2070%vsminimum
Yes, the EPYC 9554 paired with the GeForce RTX 4090 can run Warframe smoothly up to 4k achieving around 107 FPS at Ultra quality. Your GPU is 657% above the recommended specs, and your CPU is 1250% above the recommended requirements.
This CPU + GPU combo costs approximately $4444 ($2795 CPU (Rank #469 Value) + $1649 GPU (Rank #77 Value)). Your EPYC 9554 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end processor with a significantly better value rating. For example, the Ryzen Threadripper PRO 9995WX is a great upgrade option for around $11699 (Rank #418 for value).
Your EPYC 9554 is already an incredibly powerful processor. While it's technically the first component to hit its limit (which is completely normal in state-of-the-art builds), there is no meaningful upgrade path that would drastically improve your Warframe performance right now. CPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k ultra.
Warframe does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Warframe requires at minimum a Core i7-860 (CPU) and GeForce GTX 650 (GPU) with 4 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-4460 and GeForce GTX 1050 with 8 GB RAM. Your EPYC 9554 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Warframe FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
