Runs on the incredibly optimized Evolution Engine. It can be heavy in open-world areas and CPU-limited in horde modes with many enemies, but generally runs well on a wide range of hardware.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 152 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 152 FPS. At 4K, all settings exceed 89 FPS.
The GeForce RTX 4090 is 657% above the recommended GPU (GeForce GTX 1050) for Warframe. The Opteron 6344 is 21% below recommended, but 102% above minimum.
The Opteron 6344 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1698. At 1080p Ultra, this combo delivers 152 FPS, equivalent to 0.09 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.090 fps/$ | 0.090 fps/$ | 0.090 fps/$ | 0.090 fps/$ |
| 1440p | 0.090 fps/$ | 0.090 fps/$ | 0.090 fps/$ | 0.090 fps/$ |
| 4k | 0.085 fps/$ | 0.077 fps/$ | 0.068 fps/$ | 0.052 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the Opteron 6344 sets the ceiling at about 152 FPS, while the GeForce RTX 4090 could reach 700 FPS. In this scenario, the CPU limits the GPU potential by 78% (FPS gap: 548 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Opteron 6344 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 78% | CPU Limits GPU 75% | CPU Limits GPU 69% | CPU Limits GPU 62% |
| 1440p (2K QHD) | CPU Limits GPU 61% | CPU Limits GPU 54% | CPU Limits GPU 51% | CPU Limits GPU 41% |
| 4K (Ultra HD) | CPU Limits GPU 29% | CPU Limits GPU 29% | CPU Limits GPU 30% | CPU Limits GPU 27% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU40% - 65% <> GPU31% - 57% <> | CPU40% - 65% <> GPU31% - 57% <> | CPU35% - 64% <> GPU76% - 88% <> | CPU35% - 64% <> GPU76% - 88% <> |
| 1440p (2K QHD) | CPU37% - 60% <> GPU46% - 60% <> | CPU37% - 60% <> GPU46% - 60% <> | CPU26% - 56% <> GPU92% - 97% <> | CPU26% - 56% <> GPU92% - 97% <> |
| 4K (Ultra HD) | CPU31% - 41% <> GPU43% - 59% <> | CPU31% - 41% <> GPU43% - 59% <> | CPU19% - 39% <> GPU89% - 96% <> | CPU19% - 39% <> GPU89% - 96% <> |
The Opteron 6344 + GeForce RTX 4090 pairing runs this title with CPU utilization between 19% and 65% and GPU utilization between 31% and 97%. Opteron 6344 keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 63% at 1080p to 72% at 4K, while CPU averages move from 51% to 33%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the GeForce RTX 4090 averages 94% usage (92-97%), while the Opteron 6344 stays at 41% (26-56%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 51% and GPU 63%. At 1440p, that shifts to CPU 45% and GPU 74%, and at 4K it reaches CPU 33% and GPU 72%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
4K (Ultra HD) High is the most balanced preset based on this dataset. It runs around CPU 29% (19-39%) and GPU 92% (89-96%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Opteron 6344 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Opteron 6344 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 21% below recommended and your GPU is 657% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-21%vsrecommended
+657%vsrecommended
+102%vsminimum
+2070%vsminimum
Yes, the Opteron 6344 paired with the GeForce RTX 4090 can run Warframe smoothly up to 4k achieving around 89 FPS at Ultra quality. Your GPU is 657% above the recommended specs, and your CPU is 21% below the recommended requirements.
This CPU + GPU combo costs approximately $1698 ($49 CPU + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Xeon Platinum 8454H is a great upgrade option for around $6540 (Rank #1 for value).
For Warframe, upgrading the CPU would have the biggest impact on performance. The Opteron 6344 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Warframe does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Warframe requires at minimum a Core i7-860 (CPU) and GeForce GTX 650 (GPU) with 4 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-4460 and GeForce GTX 1050 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Warframe FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
