VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 256 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 244 FPS. At 4K, all settings exceed 161 FPS.
The GeForce RTX 5090 is 172% above the recommended GPU (GeForce RTX 2060) for Phasmophobia. The Ryzen 7 1700X is 12% below recommended, but 19% above minimum.
The Ryzen 7 1700X sets the FPS ceiling at 1440p high, while the GeForce RTX 5090 still has headroom. The FPS ceiling is closely matched at all 1080p settings, 1440p (low/medium/ultra), all 4k settings.
Approximated average price on current market:
Combo price: $2760. At 1080p Ultra, this combo delivers 256 FPS, equivalent to 0.09 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.134 fps/$ | 0.116 fps/$ | 0.110 fps/$ | 0.093 fps/$ |
| 1440p | 0.126 fps/$ | 0.111 fps/$ | 0.105 fps/$ | 0.088 fps/$ |
| 4k | 0.080 fps/$ | 0.077 fps/$ | 0.072 fps/$ | 0.058 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
This CPU/GPU pair is mostly balanced in Phasmophobia. Across tested presets: GPU limits in 0/12, CPU limits in 0/12, and balanced in 12/12. Peak observed performance in the sampled cells is around 369 FPS.
The Ryzen 7 1700X and GeForce RTX 5090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | Balanced | Balanced | Balanced |
| 1440p (2K QHD) | Balanced | Balanced | Balanced | Balanced |
| 4K (Ultra HD) | Balanced | Balanced | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 12% below recommended and your GPU is 172% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-12%vsrecommended
+172%vsrecommended
+19%vsminimum
+303%vsminimum
Yes, the Ryzen 7 1700X paired with the GeForce RTX 5090 can run Phasmophobia smoothly up to 4k achieving around 161 FPS at Ultra quality. Your GPU is 172% above the recommended specs, and your CPU is 12% below the recommended requirements.
This CPU + GPU combo costs approximately $2760 ($60 CPU + $2700 GPU). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #4 for value).
For Phasmophobia, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 1700X is currently the limiting factor — the GeForce RTX 5090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1440p high.
Phasmophobia does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
