VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 230 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 211 FPS. At 4K, all settings exceed 127 FPS.
The GeForce RTX 4060 Ti 16GB is 59% above the recommended GPU (GeForce RTX 2060) for Phasmophobia. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i5-10600).
Phasmophobia supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce RTX 4060 Ti 16GB.
The GeForce RTX 4060 Ti 16GB sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $833. At 1080p Ultra, this combo delivers 230 FPS, equivalent to 0.28 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.367 fps/$ | 0.339 fps/$ | 0.295 fps/$ | 0.276 fps/$ |
| 1440p | 0.340 fps/$ | 0.318 fps/$ | 0.282 fps/$ | 0.253 fps/$ |
| 4k | 0.204 fps/$ | 0.200 fps/$ | 0.164 fps/$ | 0.152 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the GeForce RTX 4060 Ti 16GB sets the ceiling at about 157 FPS, while the Ryzen 7 7800X3D has headroom up to 347 FPS. In this scenario, the GPU limits the CPU potential by 55% (FPS gap: 190 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4060 Ti 16GB is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 39% | GPU Limits CPU 45% | GPU Limits CPU 49% | GPU Limits CPU 52% |
| 1440p (2K QHD) | GPU Limits CPU 41% | GPU Limits CPU 48% | GPU Limits CPU 51% | GPU Limits CPU 55% |
| 4K (Ultra HD) | GPU Limits CPU 47% | GPU Limits CPU 50% | GPU Limits CPU 51% | GPU Limits CPU 54% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 94% above and your GPU is 59% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+94%vsrecommended
+59%vsrecommended
+161%vsminimum
+136%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 4060 Ti 16GB can run Phasmophobia smoothly up to 4k achieving around 127 FPS at Ultra quality. Your GPU is 59% above the recommended specs, and your CPU is 94% above the recommended requirements.
This CPU + GPU combo costs approximately $833 ($384 CPU (Rank #212 Value) + $449 GPU (Rank #48 Value)). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 4070 Ti for around $799 (Rank #42 for value) could deliver noticeably better performance.
For Phasmophobia, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 4060 Ti 16GB is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Phasmophobia currently only supports AFMF (AMD Fluid Motion Frames) for frame generation, which is an AMD-exclusive technology. Because you are using an NVIDIA GPU, you cannot use Frame Generation for this specific game. However, the game does support DLSS Upscaling and FSR Upscaling and XeSS, which you should enable to render at a lower resolution and use AI to significantly boost your FPS without losing visual quality.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 4060 Ti 16GB both exceed the recommended specs, so you're well-positioned for a great experience.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
