Being turn-based, extreme FPS is less critical here. The game features high-fidelity models and uses considerable storage for audio and cutscenes. 8GB of RAM is recommended for smooth operation.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 42 to 87 FPS depending on quality settings. At 1440p, frame rates range from 40 to 85 FPS. At 4K, frame rates range from 28 to 69 FPS.
The Quadro K5200 is 39% below recommended, but 250% above minimum for Honkai: Star Rail. The Ryzen 7 7800X3D is 59% above the recommended CPU (Core i7).
At lower resolutions (1080p (low/medium/high), 1440p (low/medium/high), 4k (low/medium)), the Ryzen 7 7800X3D sets the FPS ceiling. As graphical load increases at (4k (high/ultra)), the Quadro K5200 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p ultra, 1440p ultra.
Approximated average price on current market:
Combo price: $454. At 1080p Ultra, this combo delivers 42 FPS, equivalent to 0.09 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.192 fps/$ | 0.137 fps/$ | 0.119 fps/$ | 0.093 fps/$ |
| 1440p | 0.187 fps/$ | 0.132 fps/$ | 0.112 fps/$ | 0.088 fps/$ |
| 4k | 0.152 fps/$ | 0.101 fps/$ | 0.079 fps/$ | 0.062 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the Ryzen 7 7800X3D sets the ceiling at about 63 FPS, while the Quadro K5200 could reach 147 FPS. In this scenario, the CPU limits the GPU potential by 57% (FPS gap: 84 FPS). Overall distribution: CPU limits 8/12 cells, GPU limits 2/12, balanced 2/12.
Your Ryzen 7 7800X3D is the limiting side in the heaviest mismatch. This means part of the Quadro K5200 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 57% | CPU Limits GPU 42% | CPU Limits GPU 21% | Balanced |
| 1440p (2K QHD) | CPU Limits GPU 53% | CPU Limits GPU 38% | CPU Limits GPU 13% | Balanced |
| 4K (Ultra HD) | CPU Limits GPU 36% | CPU Limits GPU 12% | GPU Limits CPU 17% | GPU Limits CPU 32% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU0% - 12% <> GPU95% - 98% <> | CPU2% - 12% <> GPU91% - 96% <> | CPU2% - 12% <> GPU91% - 96% <> | CPU5% - 12% <> GPU86% - 89% <> |
| 1440p (2K QHD) | CPU1% - 12% <> GPU99% - 100% <> | CPU4% - 13% <> GPU95% - 99% <> | CPU4% - 13% <> GPU95% - 99% <> | CPU6% - 13% <> GPU90% - 93% <> |
| 4K (Ultra HD) | CPU1% - 12% <> GPU100% - 100% | CPU3% - 13% <> GPU100% - 100% | CPU3% - 13% <> GPU100% - 100% | CPU6% - 13% <> GPU100% - 100% |
The Ryzen 7 7800X3D + Quadro K5200 pairing runs this title with CPU utilization between 0% and 13% and GPU utilization between 86% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while Quadro K5200 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 93% at 1080p to 100% at 4K, while CPU averages move from 7% to 8%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) Low, the Quadro K5200 averages 100% usage (99-100%), while the Ryzen 7 7800X3D stays at 6% (1-12%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 7% and GPU 93%. At 1440p, that shifts to CPU 8% and GPU 97%, and at 4K it reaches CPU 8% and GPU 100%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 8% (5-12%) and GPU 88% (86-89%), which keeps Quadro K5200 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The Quadro K5200 reaches 100% average load at 1440p (2K QHD) Low while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 59% below recommended and your GPU is 39% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+59%vsrecommended
-39%vsrecommended
+160%vsminimum
+250%vsminimum
The Ryzen 7 7800X3D and Quadro K5200 will struggle to run Honkai: Star Rail at smooth framerates. At 1080p Ultra, you can expect around 42 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $454 ($384 CPU (Rank #212 Value) + $70 GPU). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Honkai: Star Rail, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 7800X3D is currently the limiting factor — the Quadro K5200 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1440p low, 1440p medium, 1440p high, 4k low, 4k medium. GPU-limited at: 4k high, 4k ultra.
Honkai: Star Rail does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Honkai: Star Rail requires at minimum a Core i3 (CPU) and GeForce GTX 650 (GPU) with 6 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Honkai: Star Rail FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
