VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 65 FPS. At 1440p, frame rates range from 50 to 72 FPS. At 4K, frame rates range from 39 to 55 FPS.
The Quadro M5000 is 2% below minimum GPU requirement for Phasmophobia. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i5-10600).
The Quadro M5000 determines the performance ceiling at all 1080p settings, all 1440p settings, all 4k settings, executing at maximum capacity.
Approximated average price on current market:
Combo price: $504. At 1080p Ultra, this combo delivers 65 FPS, equivalent to 0.13 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.220 fps/$ | 0.183 fps/$ | 0.145 fps/$ | 0.129 fps/$ |
| 1440p | 0.143 fps/$ | 0.125 fps/$ | 0.107 fps/$ | 0.099 fps/$ |
| 4k | 0.109 fps/$ | 0.101 fps/$ | 0.083 fps/$ | 0.077 fps/$ |
* Table values represent FPS per Dollar (higher is better)
At 1440p ultra, the Quadro M5000 sets the ceiling at about 46 FPS, while the Ryzen 7 7800X3D has headroom up to 348 FPS. In this scenario, the GPU limits the CPU potential by 87% (FPS gap: 302 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Quadro M5000 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 75% | GPU Limits CPU 79% | GPU Limits CPU 82% | GPU Limits CPU 83% |
| 1440p (2K QHD) | GPU Limits CPU 83% | GPU Limits CPU 85% | GPU Limits CPU 86% | GPU Limits CPU 87% |
| 4K (Ultra HD) | GPU Limits CPU 80% | GPU Limits CPU 82% | GPU Limits CPU 82% | GPU Limits CPU 83% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (2% below minimum). Expect performance issues. Low settings recommended.
+94%vsrecommended
-34%vsrecommended
+161%vsminimum
-2%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Quadro M5000 can run Phasmophobia smoothly up to 1080p achieving around 65 FPS at Ultra quality. Your GPU is 34% below the recommended specs, and your CPU is 94% above the recommended requirements.
This CPU + GPU combo costs approximately $504 ($384 CPU (Rank #212 Value) + $120 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the RTX 2000 Ada Generation Embedded GPU (Rank #6 for value) could deliver noticeably better performance.
For Phasmophobia, upgrading the GPU would give you the most noticeable improvement. The Quadro M5000 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Phasmophobia does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
