Being turn-based, extreme FPS is less critical here. The game features high-fidelity models and uses considerable storage for audio and cutscenes. 8GB of RAM is recommended for smooth operation.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 48 to 72 FPS depending on quality settings. At 1440p, frame rates range from 48 to 69 FPS. At 4K, frame rates range from 26 to 53 FPS.
The Quadro P3000 (móvel) is 37% below recommended, but 264% above minimum for Honkai: Star Rail. The Ryzen 7 7800X3D is 59% above the recommended CPU (Core i7).
At lower resolutions (all 1080p settings, all 1440p settings, 4k (low/medium)), the Ryzen 7 7800X3D determines the performance ceiling. As graphical load increases at (4k ultra), the Quadro P3000 (móvel) takes over as the primary performance factor. The system is well balanced at 4k high.
Approximated average price on current market:
Combo price: $584. At 1080p Ultra, this combo delivers 48 FPS, equivalent to 0.08 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.123 fps/$ | 0.110 fps/$ | 0.103 fps/$ | 0.082 fps/$ |
| 1440p | 0.118 fps/$ | 0.101 fps/$ | 0.098 fps/$ | 0.082 fps/$ |
| 4k | 0.091 fps/$ | 0.070 fps/$ | 0.057 fps/$ | 0.045 fps/$ |
* Table values represent FPS per Dollar (higher is better)
At 1080p low, the Ryzen 7 7800X3D sets the ceiling at about 63 FPS, while the Quadro P3000 (móvel) could reach 130 FPS. In this scenario, the CPU limits the GPU potential by 52% (FPS gap: 67 FPS). Overall distribution: CPU limits 10/12 cells, GPU limits 1/12, balanced 1/12.
Your Ryzen 7 7800X3D is the limiting side in the heaviest mismatch. This means part of the Quadro P3000 (móvel) rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 52% | CPU Limits GPU 47% | CPU Limits GPU 38% | CPU Limits GPU 31% |
| 1440p (2K QHD) | CPU Limits GPU 46% | CPU Limits GPU 42% | CPU Limits GPU 32% | CPU Limits GPU 23% |
| 4K (Ultra HD) | CPU Limits GPU 33% | CPU Limits GPU 20% | Balanced | GPU Limits CPU 18% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 59% below recommended and your GPU is 37% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+59%vsrecommended
-37%vsrecommended
+160%vsminimum
+264%vsminimum
The Ryzen 7 7800X3D and Quadro P3000 (móvel) will struggle to run Honkai: Star Rail at smooth framerates. At 1080p Ultra, you can expect around 48 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $584 ($384 CPU (Rank #212 Value) + $200 GPU). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Honkai: Star Rail, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 7800X3D is currently the limiting factor — the Quadro P3000 (móvel) has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium. GPU-limited at: 4k ultra.
Honkai: Star Rail does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Honkai: Star Rail requires at minimum a Core i3 (CPU) and GeForce GTX 650 (GPU) with 6 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Honkai: Star Rail FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
