Being turn-based, extreme FPS is less critical here. The game features high-fidelity models and uses considerable storage for audio and cutscenes. 8GB of RAM is recommended for smooth operation.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 16 to 32 FPS depending on quality settings. At 1440p, frame rates range from 12 to 24 FPS. At 4K, frame rates range from 8 to 16 FPS.
The Radeon HD 7640G + HD 7600M Dual is 60% below minimum GPU requirement for Honkai: Star Rail. The Ryzen 7 7800X3D is 59% above the recommended CPU (Core i7).
The Radeon HD 7640G + HD 7600M Dual sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $434. At 1080p Ultra, this combo delivers 16 FPS, equivalent to 0.04 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.074 fps/$ | 0.058 fps/$ | 0.048 fps/$ | 0.037 fps/$ |
| 1440p | 0.055 fps/$ | 0.044 fps/$ | 0.037 fps/$ | 0.028 fps/$ |
| 4k | 0.037 fps/$ | 0.030 fps/$ | 0.025 fps/$ | 0.018 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Radeon HD 7640G + HD 7600M Dual sets the ceiling at about 8 FPS, while the Ryzen 7 7800X3D has headroom up to 46 FPS. In this scenario, the GPU limits the CPU potential by 83% (FPS gap: 38 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon HD 7640G + HD 7600M Dual is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 66% | GPU Limits CPU 69% | GPU Limits CPU 71% | GPU Limits CPU 73% |
| 1440p (2K QHD) | GPU Limits CPU 75% | GPU Limits CPU 76% | GPU Limits CPU 76% | GPU Limits CPU 78% |
| 4K (Ultra HD) | GPU Limits CPU 80% | GPU Limits CPU 81% | GPU Limits CPU 80% | GPU Limits CPU 83% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (60% below minimum). Expect performance issues. Low settings recommended.
+59%vsrecommended
-93%vsrecommended
+160%vsminimum
-60%vsminimum
The Ryzen 7 7800X3D and Radeon HD 7640G + HD 7600M Dual will struggle to run Honkai: Star Rail at smooth framerates. At 1080p Ultra, you can expect around 16 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $434 ($384 CPU + $50 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce GTX 1080 SLI (móvel) (Rank #2 for value) could deliver noticeably better performance.
For Honkai: Star Rail, upgrading the GPU would give you the most noticeable improvement. The Radeon HD 7640G + HD 7600M Dual is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Honkai: Star Rail does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Honkai: Star Rail requires at minimum a Core i3 (CPU) and GeForce GTX 650 (GPU) with 6 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 8 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Honkai: Star Rail FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
