VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 13 to 46 FPS depending on quality settings. At 1440p, frame rates range from 8 to 29 FPS. At 4K, frame rates range from 3 to 13 FPS.
The Radeon HD 7750 is 82% below minimum GPU requirement for Phasmophobia. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i5-10600).
The Radeon HD 7750 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $414. At 1080p Ultra, this combo delivers 13 FPS, equivalent to 0.03 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.111 fps/$ | 0.087 fps/$ | 0.043 fps/$ | 0.031 fps/$ |
| 1440p | 0.070 fps/$ | 0.053 fps/$ | 0.029 fps/$ | 0.019 fps/$ |
| 4k | 0.031 fps/$ | 0.024 fps/$ | 0.012 fps/$ | 0.007 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the Radeon HD 7750 sets the ceiling at about 5 FPS, while the Ryzen 7 7800X3D has headroom up to 214 FPS. In this scenario, the GPU limits the CPU potential by 98% (FPS gap: 209 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon HD 7750 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 87% | GPU Limits CPU 89% | GPU Limits CPU 94% | GPU Limits CPU 96% |
| 1440p (2K QHD) | GPU Limits CPU 92% | GPU Limits CPU 93% | GPU Limits CPU 96% | GPU Limits CPU 97% |
| 4K (Ultra HD) | GPU Limits CPU 94% | GPU Limits CPU 96% | GPU Limits CPU 98% | GPU Limits CPU 98% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU36% - 57% <> GPU44% - 63% <> | CPU36% - 57% <> GPU44% - 63% <> | CPU36% - 57% <> GPU46% - 67% <> | CPU29% - 47% <> GPU57% - 73% <> |
| 1440p (2K QHD) | CPU27% - 33% <> GPU44% - 63% <> | CPU27% - 33% <> GPU44% - 63% <> | CPU27% - 33% <> GPU46% - 67% <> | CPU15% - 21% <> GPU54% - 69% <> |
| 4K (Ultra HD) | CPU27% - 35% <> GPU44% - 63% <> | CPU27% - 35% <> GPU44% - 63% <> | CPU27% - 35% <> GPU46% - 67% <> | CPU16% - 23% <> GPU59% - 77% <> |
The Ryzen 7 7800X3D + Radeon HD 7750 pairing runs this title with CPU utilization between 15% and 57% and GPU utilization between 44% and 77%. Ryzen 7 7800X3D keeps significant headroom across presets, while Radeon HD 7750 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 57% at 1080p to 58% at 4K, while CPU averages move from 44% to 28%.
The utilization pattern is relatively even. The Radeon HD 7750 reaches 68% average at its highest-load preset, while the Ryzen 7 7800X3D peaks at 46% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 44% and GPU 57%. At 1440p, that shifts to CPU 27% and GPU 57%, and at 4K it reaches CPU 28% and GPU 58%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
4K (Ultra HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 20% (16-23%) and GPU 68% (59-77%), which keeps Radeon HD 7750 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and Radeon HD 7750 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (82% below minimum). Expect performance issues. Low settings recommended.
+94%vsrecommended
-88%vsrecommended
+161%vsminimum
-82%vsminimum
The Ryzen 7 7800X3D and Radeon HD 7750 will struggle to run Phasmophobia at smooth framerates. At 1080p Ultra, you can expect around 13 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $414 ($384 CPU (Rank #212 Value) + $30 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Phasmophobia, upgrading the GPU would give you the most noticeable improvement. The Radeon HD 7750 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Phasmophobia does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
