VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 134 FPS. At 1440p, all settings exceed 109 FPS. At 4K, all settings exceed 72 FPS.
The Radeon RX 7600 is 16% above the recommended GPU (GeForce RTX 2060) for Phasmophobia. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i5-10600).
Phasmophobia supports: AFMF. The Radeon RX 7600 can use AFMF, providing up to 1.5x-2x frame rate boost.
The Radeon RX 7600 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $634. At 1080p Ultra, this combo delivers 134 FPS, equivalent to 0.21 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.331 fps/$ | 0.282 fps/$ | 0.238 fps/$ | 0.211 fps/$ |
| 1440p | 0.238 fps/$ | 0.215 fps/$ | 0.196 fps/$ | 0.172 fps/$ |
| 4k | 0.158 fps/$ | 0.151 fps/$ | 0.129 fps/$ | 0.114 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the Radeon RX 7600 sets the ceiling at about 95 FPS, while the Ryzen 7 7800X3D has headroom up to 349 FPS. In this scenario, the GPU limits the CPU potential by 73% (FPS gap: 254 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX 7600 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 56% | GPU Limits CPU 62% | GPU Limits CPU 66% | GPU Limits CPU 68% |
| 1440p (2K QHD) | GPU Limits CPU 66% | GPU Limits CPU 70% | GPU Limits CPU 71% | GPU Limits CPU 73% |
| 4K (Ultra HD) | GPU Limits CPU 66% | GPU Limits CPU 69% | GPU Limits CPU 68% | GPU Limits CPU 71% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 94% above and your GPU is 16% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+94%vsrecommended
+16%vsrecommended
+161%vsminimum
+72%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 7600 can run Phasmophobia smoothly up to 4k achieving around 72 FPS at Ultra quality. Your GPU is 16% above the recommended specs, and your CPU is 94% above the recommended requirements.
This CPU + GPU combo costs approximately $634 ($384 CPU (Rank #212 Value) + $250 GPU (Rank #10 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Phasmophobia, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 7600 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Phasmophobia supports AFMF, and your Radeon RX 7600 is compatible with AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your Ryzen 7 7800X3D and Radeon RX 7600 both exceed the recommended specs, so you're well-positioned for a great experience.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
