VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 42 to 79 FPS depending on quality settings. At 1440p, frame rates range from 30 to 53 FPS. At 4K, frame rates range from 22 to 37 FPS.
The Radeon RX Vega Ryzen 5 5600GT is 1% below minimum GPU requirement for Phasmophobia. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i5-10600).
The Radeon RX Vega Ryzen 5 5600GT sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p medium, the Radeon RX Vega Ryzen 5 5600GT sets the ceiling at about 42 FPS, while the Ryzen 7 7800X3D has headroom up to 433 FPS. In this scenario, the GPU limits the CPU potential by 90% (FPS gap: 391 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX Vega Ryzen 5 5600GT is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 85% | GPU Limits CPU 87% | GPU Limits CPU 87% | GPU Limits CPU 87% |
| 1440p (2K QHD) | GPU Limits CPU 88% | GPU Limits CPU 90% | GPU Limits CPU 90% | GPU Limits CPU 89% |
| 4K (Ultra HD) | GPU Limits CPU 87% | GPU Limits CPU 89% | GPU Limits CPU 88% | GPU Limits CPU 89% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (1% below minimum). Expect performance issues. Low settings recommended.
+94%vsrecommended
-33%vsrecommended
+161%vsminimum
-1%vsminimum
The Ryzen 7 7800X3D and Radeon RX Vega Ryzen 5 5600GT will struggle to run Phasmophobia at smooth framerates. At 1080p Ultra, you can expect around 42 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Phasmophobia, upgrading the GPU would give you the most noticeable improvement. The Radeon RX Vega Ryzen 5 5600GT is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Phasmophobia does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
