VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 166 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 144 FPS. At 4K, all settings exceed 95 FPS.
The Arc A750 is 12% below recommended, but 31% above minimum for Phasmophobia. The Ryzen 7 9800X3D is 126% above the recommended CPU (Core i5-10600).
The Arc A750 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 9800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $694.38. At 1080p Ultra, this combo delivers 166 FPS, equivalent to 0.24 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.396 fps/$ | 0.328 fps/$ | 0.291 fps/$ | 0.239 fps/$ |
| 1440p | 0.338 fps/$ | 0.284 fps/$ | 0.251 fps/$ | 0.207 fps/$ |
| 4k | 0.199 fps/$ | 0.183 fps/$ | 0.161 fps/$ | 0.137 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k ultra, the Arc A750 sets the ceiling at about 111 FPS, while the Ryzen 7 9800X3D has headroom up to 194 FPS. In this scenario, the GPU limits the CPU potential by 43% (FPS gap: 83 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Arc A750 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 9800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 18% | GPU Limits CPU 27% | GPU Limits CPU 34% | GPU Limits CPU 35% |
| 1440p (2K QHD) | GPU Limits CPU 24% | GPU Limits CPU 31% | GPU Limits CPU 37% | GPU Limits CPU 37% |
| 4K (Ultra HD) | GPU Limits CPU 32% | GPU Limits CPU 35% | GPU Limits CPU 42% | GPU Limits CPU 43% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 126% below recommended and your GPU is 12% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+126%vsrecommended
-12%vsrecommended
+204%vsminimum
+31%vsminimum
Yes, the Ryzen 7 9800X3D paired with the Arc A750 can run Phasmophobia smoothly up to 4k achieving around 95 FPS at Ultra quality. Your GPU is 12% below the recommended specs, and your CPU is 126% above the recommended requirements.
This CPU + GPU combo costs approximately $694.38 ($465.38 CPU + $229 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the TITAN Xp for around $1199 (Rank #121 for value) could deliver noticeably better performance.
For Phasmophobia, upgrading the GPU would give you the most noticeable improvement. The Arc A750 is the limiting factor here, while the Ryzen 7 9800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Phasmophobia does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
