VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 328 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 284 FPS. At 4K, all settings exceed 167 FPS.
The GeForce RTX 4090 is 167% above the recommended GPU (GeForce RTX 2060) for Phasmophobia. The Ryzen Embedded V2718 is 10% below recommended, but 20% above minimum.
Phasmophobia supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce RTX 4090.
At lower resolutions (1080p low), the Ryzen Embedded V2718 sets the FPS ceiling. As graphical load increases at (1080p (medium/high/ultra), 1440p (medium/high/ultra), all 4k settings), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1440p low.
Approximated average price on current market:
Combo price: $1849. At 1080p Ultra, this combo delivers 328 FPS, equivalent to 0.18 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.214 fps/$ | 0.214 fps/$ | 0.198 fps/$ | 0.177 fps/$ |
| 1440p | 0.214 fps/$ | 0.209 fps/$ | 0.184 fps/$ | 0.154 fps/$ |
| 4k | 0.127 fps/$ | 0.129 fps/$ | 0.105 fps/$ | 0.090 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the GeForce RTX 4090 sets the ceiling at about 138 FPS, while the Ryzen Embedded V2718 has headroom up to 195 FPS. In this scenario, the GPU limits the CPU potential by 29% (FPS gap: 57 FPS). Overall distribution: GPU limits 10/12 cells, CPU limits 1/12, balanced 1/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Ryzen Embedded V2718 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 6% | GPU Limits CPU 6% | GPU Limits CPU 14% | GPU Limits CPU 13% |
| 1440p (2K QHD) | Balanced | GPU Limits CPU 13% | GPU Limits CPU 15% | GPU Limits CPU 14% |
| 4K (Ultra HD) | GPU Limits CPU 26% | GPU Limits CPU 28% | GPU Limits CPU 29% | GPU Limits CPU 26% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 10% below recommended and your GPU is 167% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-10%vsrecommended
+167%vsrecommended
+20%vsminimum
+295%vsminimum
Yes, the Ryzen Embedded V2718 paired with the GeForce RTX 4090 can run Phasmophobia smoothly up to 4k achieving around 167 FPS at Ultra quality. Your GPU is 167% above the recommended specs, and your CPU is 10% below the recommended requirements.
This CPU + GPU combo costs approximately $1849 ($200 CPU (Rank #249 Value) + $1649 GPU (Rank #77 Value)). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Phasmophobia performance right now. GPU fully utilized at: 1080p high, 1080p medium, 1080p ultra, 1440p high, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra. CPU-limited at: 1080p low.
Phasmophobia currently only supports AFMF (AMD Fluid Motion Frames) for frame generation, which is an AMD-exclusive technology. Because you are using an NVIDIA GPU, you cannot use Frame Generation for this specific game. However, the game does support DLSS Upscaling and FSR Upscaling and XeSS, which you should enable to render at a lower resolution and use AI to significantly boost your FPS without losing visual quality.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
