VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 303 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 262 FPS. At 4K, all settings exceed 158 FPS.
The GeForce RTX 4090 is 167% above the recommended GPU (GeForce RTX 2060) for Phasmophobia. The Xeon E7-4809 v2 is 7% below recommended, but 25% above minimum.
The GeForce RTX 4090 determines the performance ceiling at 1080p medium, 1440p medium, all 4k settings, executing at maximum capacity. The system is well balanced at 1080p (low/high/ultra), 1440p (low/high/ultra).
At 4k medium, the GeForce RTX 4090 sets the ceiling at about 185 FPS, while the Xeon E7-4809 v2 has headroom up to 246 FPS. In this scenario, the GPU limits the CPU potential by 25% (FPS gap: 61 FPS). Overall distribution: GPU limits 6/12 cells, CPU limits 0/12, balanced 6/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Xeon E7-4809 v2 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | GPU Limits CPU 7% | Balanced | Balanced |
| 1440p (2K QHD) | Balanced | GPU Limits CPU 7% | Balanced | Balanced |
| 4K (Ultra HD) | GPU Limits CPU 24% | GPU Limits CPU 25% | GPU Limits CPU 19% | GPU Limits CPU 13% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 7% below recommended and your GPU is 167% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-7%vsrecommended
+167%vsrecommended
+25%vsminimum
+295%vsminimum
Yes, the Xeon E7-4809 v2 paired with the GeForce RTX 4090 can run Phasmophobia smoothly up to 4k achieving around 158 FPS at Ultra quality. Your GPU is 167% above the recommended specs, and your CPU is 7% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Phasmophobia performance right now. GPU fully utilized at: 1080p medium, 1440p medium, 4k low, 4k medium, 4k high, 4k ultra.
Phasmophobia does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
