VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 343 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 313 FPS. At 4K, all settings exceed 180 FPS.
The GeForce RTX 4090 is 167% above the recommended GPU (GeForce RTX 2060) for Phasmophobia. The Xeon Gold 5320H is 79% above the recommended CPU (Core i5-10600).
The GeForce RTX 4090 sets the FPS ceiling at 1080p (medium/high/ultra), 1440p (medium/high/ultra), all 4k settings, while the Xeon Gold 5320H still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p low, 1440p low.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the GeForce RTX 4090 sets the ceiling at about 153 FPS, while the Xeon Gold 5320H has headroom up to 200 FPS. In this scenario, the GPU limits the CPU potential by 24% (FPS gap: 47 FPS). Overall distribution: GPU limits 11/12 cells, CPU limits 0/12, balanced 1/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Xeon Gold 5320H frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | GPU Limits CPU 9% | GPU Limits CPU 10% | GPU Limits CPU 11% |
| 1440p (2K QHD) | GPU Limits CPU 6% | GPU Limits CPU 10% | GPU Limits CPU 12% | GPU Limits CPU 14% |
| 4K (Ultra HD) | GPU Limits CPU 22% | GPU Limits CPU 23% | GPU Limits CPU 24% | GPU Limits CPU 22% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU12% - 24% <> GPU42% - 67% <> | CPU12% - 24% <> GPU42% - 67% <> | CPU23% - 38% <> GPU69% - 86% <> | CPU23% - 38% <> GPU77% - 90% <> |
| 1440p (2K QHD) | CPU4% - 13% <> GPU46% - 67% <> | CPU4% - 13% <> GPU46% - 67% <> | CPU13% - 18% <> GPU73% - 87% <> | CPU12% - 18% <> GPU81% - 91% <> |
| 4K (Ultra HD) | CPU4% - 14% <> GPU46% - 67% <> | CPU4% - 14% <> GPU46% - 67% <> | CPU12% - 20% <> GPU76% - 90% <> | CPU13% - 21% <> GPU84% - 94% <> |
The Xeon Gold 5320H + GeForce RTX 4090 pairing runs this title with CPU utilization between 4% and 38% and GPU utilization between 42% and 94%. Xeon Gold 5320H keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 68% at 1080p to 71% at 4K, while CPU averages move from 24% to 13%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 89% average at its highest-load preset, while the Xeon Gold 5320H peaks at 30% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 24% and GPU 68%. At 1440p, that shifts to CPU 12% and GPU 70%, and at 4K it reaches CPU 13% and GPU 71%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
4K (Ultra HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 17% (13-21%) and GPU 89% (84-94%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon Gold 5320H remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Xeon Gold 5320H and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 79% above and your GPU is 167% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+79%vsrecommended
+167%vsrecommended
+141%vsminimum
+295%vsminimum
Yes, the Xeon Gold 5320H paired with the GeForce RTX 4090 can run Phasmophobia smoothly up to 4k achieving around 180 FPS at Ultra quality. Your GPU is 167% above the recommended specs, and your CPU is 79% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Phasmophobia performance right now. GPU fully utilized at: 1080p medium, 1080p high, 1080p ultra, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Phasmophobia does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your Xeon Gold 5320H and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
