VR support requires stronger hardware. The game also uses the CPU for voice recognition processing, adding a unique load.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 350 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 316 FPS. At 4K, all settings exceed 180 FPS.
The GeForce RTX 4090 is 167% above the recommended GPU (GeForce RTX 2060) for Phasmophobia. The Xeon Gold 6143 is 40% above the recommended CPU (Core i5-10600).
The GeForce RTX 4090 determines the performance ceiling at all 1080p settings, all 1440p settings, all 4k settings, executing at maximum capacity.
Approximated average price on current market:
Combo price: $1991. At 1080p Ultra, this combo delivers 350 FPS, equivalent to 0.18 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.243 fps/$ | 0.220 fps/$ | 0.188 fps/$ | 0.176 fps/$ |
| 1440p | 0.223 fps/$ | 0.205 fps/$ | 0.181 fps/$ | 0.159 fps/$ |
| 4k | 0.127 fps/$ | 0.124 fps/$ | 0.101 fps/$ | 0.090 fps/$ |
* Table values represent FPS per Dollar (higher is better)
At 4k low, the GeForce RTX 4090 sets the ceiling at about 188 FPS, while the Xeon Gold 6143 has headroom up to 252 FPS. In this scenario, the GPU limits the CPU potential by 25% (FPS gap: 64 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Xeon Gold 6143 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 11% | GPU Limits CPU 13% | GPU Limits CPU 13% | GPU Limits CPU 13% |
| 1440p (2K QHD) | GPU Limits CPU 9% | GPU Limits CPU 12% | GPU Limits CPU 13% | GPU Limits CPU 14% |
| 4K (Ultra HD) | GPU Limits CPU 25% | GPU Limits CPU 25% | GPU Limits CPU 25% | GPU Limits CPU 23% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU14% - 33% <> GPU45% - 70% <> | CPU14% - 33% <> GPU45% - 70% <> | CPU27% - 50% <> GPU76% - 91% <> | CPU25% - 50% <> GPU88% - 97% <> |
| 1440p (2K QHD) | CPU6% - 20% <> GPU48% - 71% <> | CPU6% - 20% <> GPU48% - 71% <> | CPU17% - 29% <> GPU84% - 93% <> | CPU14% - 29% <> GPU96% - 99% <> |
| 4K (Ultra HD) | CPU6% - 22% <> GPU48% - 72% <> | CPU6% - 22% <> GPU48% - 72% <> | CPU16% - 31% <> GPU86% - 96% <> | CPU15% - 31% <> GPU98% - 100% <> |
The Xeon Gold 6143 + GeForce RTX 4090 pairing runs this title with CPU utilization between 6% and 50% and GPU utilization between 45% and 100%. Xeon Gold 6143 keeps significant headroom across presets, while GeForce RTX 4090 becomes the primary limiter at high visual load. As resolution scales, average GPU load rises from 73% at 1080p to 78% at 4K, while CPU averages move from 31% to 19%.
This profile is GPU-bound. At 4K (Ultra HD) Ultra, the GeForce RTX 4090 averages 99% usage (98-100%), while the Xeon Gold 6143 stays at 23% (15-31%), indicating the graphics pipeline is the limiting stage.
At 1080p, averages sit around CPU 31% and GPU 73%. At 1440p, that shifts to CPU 18% and GPU 77%, and at 4K it reaches CPU 19% and GPU 78%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) High is the most balanced preset based on this dataset. It runs around CPU 23% (17-29%) and GPU 88% (84-93%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon Gold 6143 remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 99% average load at 4K (Ultra HD) Ultra while the Xeon Gold 6143 still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization & Bottlenecks: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. This is the key to identifying performance bottlenecks in any system.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 40% above and your GPU is 167% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+40%vsrecommended
+167%vsrecommended
+89%vsminimum
+295%vsminimum
Yes, the Xeon Gold 6143 paired with the GeForce RTX 4090 can run Phasmophobia smoothly up to 4k achieving around 180 FPS at Ultra quality. Your GPU is 167% above the recommended specs, and your CPU is 40% above the recommended requirements.
This CPU + GPU combo costs approximately $1991 ($342 CPU (Rank #106 Value) + $1649 GPU (Rank #77 Value)). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Phasmophobia performance right now. GPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Phasmophobia does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Phasmophobia requires at minimum a Core i5-4590 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 21 GB storage. For the recommended experience, you need a Core i5-10600 and GeForce RTX 2060 with 8 GB RAM. Your Xeon Gold 6143 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Phasmophobia FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
