Being turn-based, extreme FPS is less critical here. The game features high-fidelity models and uses considerable storage for audio and cutscenes. 8GB of RAM is recommended for smooth operation.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 60 FPS. At 1440p, frame rates range from 59 to 100 FPS. At 4K, frame rates range from 50 to 81 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Honkai: Star Rail. The Xeon Silver 4210R is 30% below recommended, but 15% above minimum.
The Xeon Silver 4210R sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the Xeon Silver 4210R sets the ceiling at about 70 FPS, while the GeForce RTX 4090 could reach 131 FPS. In this scenario, the CPU limits the GPU potential by 47% (FPS gap: 61 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Xeon Silver 4210R is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 23% | CPU Limits GPU 34% | CPU Limits GPU 32% | CPU Limits GPU 46% |
| 1440p (2K QHD) | CPU Limits GPU 17% | CPU Limits GPU 29% | CPU Limits GPU 28% | CPU Limits GPU 43% |
| 4K (Ultra HD) | CPU Limits GPU 40% | CPU Limits GPU 47% | CPU Limits GPU 44% | CPU Limits GPU 44% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 30% below recommended and your GPU is 279% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-30%vsrecommended
+279%vsrecommended
+15%vsminimum
+2070%vsminimum
Yes, the Xeon Silver 4210R paired with the GeForce RTX 4090 can run Honkai: Star Rail smoothly up to 1080p achieving around 60 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 30% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Honkai: Star Rail, upgrading the CPU would have the biggest impact on performance. The Xeon Silver 4210R is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Honkai: Star Rail does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Honkai: Star Rail requires at minimum a Core i3 (CPU) and GeForce GTX 650 (GPU) with 6 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Honkai: Star Rail FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
