G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.

GeForce RTX 3060 Ti vs GeForce9400M FPS Benchmarks

Predicted gaming performance across popular games. Tested paired with Ryzen 7 9800X3D to isolate GPU performance.

Search any supported game below to compare 1080p FPS for both components.

GeForce RTX 3060 Ti vs GeForce9400M: Pros, Cons & Final Verdict

See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.

GeForce RTX 3060 Ti

2020

Why buy it

✅8562.2% more average FPS across 50 tracked games in our benchmark data.
✅Delivers 100+% more G3D Mark for each dollar spent, at 50.9 vs 0 G3D/$ ($399 MSRP vs Unknown MSRP).
✅Access to DLSS 2 Super Resolution (2020).
✅1500% more VRAM for high-resolution textures and newer games (8 GB vs 512 MB).
✅Better long-term bet: Ampere (2020−2025) on 8nm gives it a newer hardware base for upcoming games.

Trade-offs

❌506.1% higher power demand at 200W vs 33W.

GeForce9400M

2015

Why buy it

✅Draws 33W instead of 200W, a 167W reduction.

Trade-offs

❌Lower average FPS than GeForce RTX 3060 Ti across 50 tracked games in our benchmark data.
❌Less VRAM, with 512 MB vs 8 GB for high-resolution textures and newer games.
❌No DLSS support; it relies on Upscaling support instead.
❌2015 hardware with 512 MB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.
❌Lower G3D Mark per dollar, at 0 vs 50.9 G3D/$ (Unknown MSRP vs $399 MSRP).

Quick Answers

Which GPU is faster for gaming right now?

GeForce RTX 3060 Ti is the faster gaming card right now. In our data, it leads by 8562.2% in average FPS across 50 tracked games in our benchmark data and by 19062.3% in PassMark G3D (20,312 vs 106), so the answer here is pretty clean.

Which GPU is the safer long-term pick for 2026 and beyond?

GeForce RTX 3060 Ti is the safer long-term pick for 2026 and beyond. The case is simple: 8 GB vs 512 MB of VRAM, the newer upscaling stack, DLSS 2 Super Resolution (2020) instead of no meaningful modern upscaling stack, a 8nm process instead of 28nm, and 38 vs 0 ray-tracing units. That gives it more room for heavier textures and higher settings over time.

Which GPU is the better buy today?

GeForce RTX 3060 Ti makes the most sense today based on the pricing and value data we have for this matchup.

GeForce RTX 3060 Ti vs GeForce9400M Technical Specifications

Side-by-side specs, architecture details, clocks, memory, power, and platform differences.

GeForce RTX 3060 Ti

The GeForce RTX 3060 Ti is manufactured by NVIDIA. It was released in December 1 2020. It features the Ampere architecture. The core clock ranges from 1410 MHz to 1665 MHz. It has 4864 shading units. The thermal design power (TDP) is 200W. Manufactured using 8 nm process technology. It features 38 dedicated ray tracing cores for enhanced lighting effects. G3D Mark benchmark score: 20,312 points. Launch price was $399.

GeForce9400M

The GeForce9400M is manufactured by NVIDIA. It was released in March 13 2015. It features the Maxwell architecture. The core clock ranges from 1072 MHz to 1176 MHz. It has 384 shading units. The thermal design power (TDP) is 33W. Manufactured using 28 nm process technology. G3D Mark benchmark score: 106 points.

⚡

Graphics Performance

In G3D Mark, the GeForce RTX 3060 Ti scores 20,312 versus the GeForce9400M's 106 — the GeForce RTX 3060 Ti leads by 19062.3%. The GeForce RTX 3060 Ti is built on Ampere while the GeForce9400M uses Maxwell, both on 8 nm vs 28 nm. Shader units: 4,864 (GeForce RTX 3060 Ti) vs 384 (GeForce9400M). Raw compute: 16.2 TFLOPS (GeForce RTX 3060 Ti) vs 0.9032 TFLOPS (GeForce9400M). Boost clocks: 1665 MHz vs 1176 MHz.

Feature	GeForce RTX 3060 Ti	GeForce9400M
G3D Mark Score	20,312+19062%	106
Architecture	Ampere	Maxwell
Process Node	8 nm	28 nm
Shading Units	4864+1167%	384
Compute (TFLOPS)	16.2 TFLOPS+1694%	0.9032 TFLOPS
Boost Clock	1665 MHz+42%	1176 MHz
ROPs	80+900%	8
TMUs	152+533%	24
L1 Cache	4.8 MB+2426%	0.19 MB
L2 Cache	4 MB+300%	1 MB

✨

Advanced Features (DLSS/FSR)

The GeForce9400M supports the newer Upscaling support, whereas the GeForce RTX 3060 Ti is capped at DLSS 2 Super Resolution.

Feature	GeForce RTX 3060 Ti	GeForce9400M
Upscaling Tech	DLSS 2 Super Resolution	Upscaling support
Frame Generation	Not Supported	Not Supported
Ray Reconstruction	No	No
Low Latency	NVIDIA Reflex	NVIDIA Reflex

💾

Video Memory (VRAM)

The GeForce RTX 3060 Ti has 8 GB of VRAM, while the GeForce9400M carries 512 MB. GeForce RTX 3060 Ti gives you 1500% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 256-bit on the GeForce RTX 3060 Ti and 64-bit on the GeForce9400M. L2 Cache: 4 MB (GeForce RTX 3060 Ti) vs 1 MB (GeForce9400M) — the GeForce RTX 3060 Ti has significantly larger on-die cache to reduce VRAM reliance.

Feature	GeForce RTX 3060 Ti	GeForce9400M
VRAM Capacity	8 GB+1500%	0.5 GB
Memory Type	GDDR6	GDDR5
Bus Width	256-bit+300%	64-bit
L2 Cache	4 MB+300%	1 MB

🖥️

Display & API Support

DirectX support: 12 Ultimate (12_2) (GeForce RTX 3060 Ti) vs 11.1 (10_0) (GeForce9400M). OpenGL: 4.6 vs 3.3. Maximum simultaneous displays: 4 vs 2.

Feature	GeForce RTX 3060 Ti	GeForce9400M
DirectX	12 Ultimate (12_2)+8%	11.1 (10_0)
OpenGL	4.6+39%	3.3
Max Displays	4+100%	2

🎬

Media & Encoding

Hardware encoder: NVENC (Ampere) (GeForce RTX 3060 Ti) vs No NVENC (Tesla) (GeForce9400M). Decoder: NVDEC (Ampere) vs PureVideo HD VP3. Supported codecs: H.264,H.265,VP9,AV1 (GeForce RTX 3060 Ti) vs H.264,VC-1,MPEG-2 (GeForce9400M).

Feature	GeForce RTX 3060 Ti	GeForce9400M
Encoder	NVENC (Ampere)	No NVENC (Tesla)
Decoder	NVDEC (Ampere)	PureVideo HD VP3
Codecs	H.264,H.265,VP9,AV1	H.264,VC-1,MPEG-2

🔌

Power & Dimensions

The GeForce RTX 3060 Ti draws 200W versus the GeForce9400M's 33W — a 143.3% difference. The GeForce9400M is more power-efficient. Recommended PSU: 600W (GeForce RTX 3060 Ti) vs 350W (GeForce9400M). Power connectors: 8-pin vs PCIe-powered. Typical load temperature: 75 vs 85°C.

Feature	GeForce RTX 3060 Ti	GeForce9400M
TDP	200W	33W-84%
Recommended PSU	600W	350W-42%
Power Connector	8-pin	PCIe-powered
Length	242mm	—
Height	112mm	—
Slots	2	0-100%
Temp (Load)	75-12%	85°C
Perf/Watt	101.6+3075%	3.2

💰

Value Analysis

The newer card here is GeForce RTX 3060 Ti (2020 vs 2015).

Feature	GeForce RTX 3060 Ti	GeForce9400M
MSRP	$399	—
Codename	GA104	GM108
Release	December 1 2020	March 13 2015
Ranking	#73	#847

Search GeForce RTX 3060 Ti on Amazon

Search GeForce9400M on Amazon

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.