GeForce RTX 3060 Ti vs Quadro FX 560

G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.

GeForce RTX 3060 Ti vs Quadro FX 560 FPS Benchmarks

Predicted gaming performance across popular games. Tested paired with Ryzen 7 9800X3D to isolate GPU performance.

Search any supported game below to compare 1080p FPS for both components.

GeForce RTX 3060 Ti vs Quadro FX 560: Pros, Cons & Final Verdict

See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.

GeForce RTX 3060 Ti

2020

Why buy it

✅5559.3% more average FPS across 50 tracked games in our benchmark data.
✅Delivers 13252% more G3D Mark for each dollar spent, at 50.9 vs 0.4 G3D/$ ($399 MSRP vs $299 MSRP).
✅Access to DLSS 2 Super Resolution (2020).
✅6300% more VRAM for high-resolution textures and newer games (8 GB vs 128 MB).
✅Better long-term bet: Ampere (2020−2025) on 8nm gives it a newer hardware base for upcoming games.

Trade-offs

❌24100% longer card at 242mm vs 1mm.

Quadro FX 560

2008

Why buy it

✅Costs $100 less on MSRP ($299 MSRP vs $399 MSRP).
✅Measures 1mm instead of 242mm, a 241mm shorter card that is more SFF-friendly.

Trade-offs

❌Lower average FPS than GeForce RTX 3060 Ti across 50 tracked games in our benchmark data.
❌Less VRAM, with 128 MB vs 8 GB for high-resolution textures and newer games.
❌No DLSS support; it relies on Upscaling support instead.
❌2008 hardware with 128 MB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.
❌Lower G3D Mark per dollar, at 0.4 vs 50.9 G3D/$ ($299 MSRP vs $399 MSRP).

Quick Answers

Which GPU is faster for gaming right now?

GeForce RTX 3060 Ti is the faster gaming card right now. In our data, it leads by 5559.3% in average FPS across 50 tracked games in our benchmark data and by 17717.5% in PassMark G3D (20,312 vs 114), so the answer here is pretty clean.

Which GPU is the safer long-term pick for 2026 and beyond?

GeForce RTX 3060 Ti is the safer long-term pick for 2026 and beyond. The case is simple: 8 GB vs 128 MB of VRAM, the newer upscaling stack, DLSS 2 Super Resolution (2020) instead of no meaningful modern upscaling stack, a 8nm process instead of 55nm, and 38 vs 0 ray-tracing units. That gives it more room for heavier textures and higher settings over time.

Which GPU is the better buy today?

GeForce RTX 3060 Ti makes the most sense to buy today. It is $100 more expensive on MSRP at $399 vs $299, and it leads G3D-per-dollar by 13252% (50.9 vs 0.4), so the value case lines up with the gaming result.

GeForce RTX 3060 Ti vs Quadro FX 560 Technical Specifications

Side-by-side specs, architecture details, clocks, memory, power, and platform differences.

GeForce RTX 3060 Ti

The GeForce RTX 3060 Ti is manufactured by NVIDIA. It was released in December 1 2020. It features the Ampere architecture. The core clock ranges from 1410 MHz to 1665 MHz. It has 4864 shading units. The thermal design power (TDP) is 200W. Manufactured using 8 nm process technology. It features 38 dedicated ray tracing cores for enhanced lighting effects. G3D Mark benchmark score: 20,312 points. Launch price was $399.

Quadro FX 560

The Quadro FX 560 is manufactured by NVIDIA. It was released in November 11 2008. It features the Tesla 2.0 architecture. The core clock speed is 610 MHz. It has 240 shading units. The thermal design power (TDP) is 189W. Manufactured using 55 nm process technology. G3D Mark benchmark score: 114 points. Launch price was $3,499.

⚡

Graphics Performance

In G3D Mark, the GeForce RTX 3060 Ti scores 20,312 versus the Quadro FX 560's 114 — the GeForce RTX 3060 Ti leads by 17717.5%. The GeForce RTX 3060 Ti is built on Ampere while the Quadro FX 560 uses Tesla 2.0, both on 8 nm vs 55 nm. Shader units: 4,864 (GeForce RTX 3060 Ti) vs 240 (Quadro FX 560). Raw compute: 16.2 TFLOPS (GeForce RTX 3060 Ti) vs 0.6221 TFLOPS (Quadro FX 560).

Feature	GeForce RTX 3060 Ti	Quadro FX 560
G3D Mark Score	20,312+17718%	114
Architecture	Ampere	Tesla 2.0
Process Node	8 nm	55 nm
Shading Units	4864+1927%	240
Compute (TFLOPS)	16.2 TFLOPS+2504%	0.6221 TFLOPS
ROPs	80+150%	32
TMUs	152+90%	80
L2 Cache	4 MB+1500%	0.25 MB

✨

Advanced Features (DLSS/FSR)

The GeForce RTX 3060 Ti gets NVIDIA DLSS, which still tends to look cleaner in motion. The Quadro FX 560 leans on FSR, which is flexible and widely supported, but usually a bit rougher at the same settings.

Feature	GeForce RTX 3060 Ti	Quadro FX 560
Upscaling Tech	DLSS 2 Super Resolution	Upscaling support
Frame Generation	Not Supported	Not Supported
Ray Reconstruction	No	No
Low Latency	NVIDIA Reflex	Standard

💾

Video Memory (VRAM)

The GeForce RTX 3060 Ti has 8 GB of VRAM, while the Quadro FX 560 carries 128 MB. GeForce RTX 3060 Ti gives you 6300% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 256-bit on the GeForce RTX 3060 Ti and 64-bit on the Quadro FX 560. L2 Cache: 4 MB (GeForce RTX 3060 Ti) vs 0.25 MB (Quadro FX 560) — the GeForce RTX 3060 Ti has significantly larger on-die cache to reduce VRAM reliance.

Feature	GeForce RTX 3060 Ti	Quadro FX 560
VRAM Capacity	8 GB+6300%	0.125 GB
Memory Type	GDDR6	GDDR5
Bus Width	256-bit+300%	64-bit
L2 Cache	4 MB+1500%	0.25 MB

🖥️

Display & API Support

DirectX support: 12 Ultimate (12_2) (GeForce RTX 3060 Ti) vs 9_0c (Quadro FX 560). Maximum simultaneous displays: 4 vs 2.

Feature	GeForce RTX 3060 Ti	Quadro FX 560
DirectX	12 Ultimate (12_2)+33%	9_0c
Max Displays	4+100%	2

🔌

Power & Dimensions

The GeForce RTX 3060 Ti draws 200W versus the Quadro FX 560's 189W — a 5.7% difference. The Quadro FX 560 is more power-efficient. Recommended PSU: 600W (GeForce RTX 3060 Ti) vs 350W (Quadro FX 560). Power connectors: 8-pin vs PCIe-powered. Card length: 242mm vs 1mm, occupying 2 vs 1 slots.

Feature	GeForce RTX 3060 Ti	Quadro FX 560
TDP	200W	189W-6%
Recommended PSU	600W	350W-42%
Power Connector	8-pin	PCIe-powered
Length	242mm	1mm
Height	112mm	—
Slots	2	1-50%
Temp (Load)	75	—
Perf/Watt	101.6+16833%	0.6

💰

Value Analysis

At launch, the GeForce RTX 3060 Ti came in at $399, while the Quadro FX 560 launched at $299. On MSRP, Quadro FX 560 was 25.1% cheaper ($100 less). Performance per dollar on MSRP (G3D Mark / MSRP): 50.9 (GeForce RTX 3060 Ti) vs 0.4 (Quadro FX 560) — the GeForce RTX 3060 Ti offers 12625% better value. The newer card here is GeForce RTX 3060 Ti (2020 vs 2008).

Feature	GeForce RTX 3060 Ti	Quadro FX 560
MSRP	$399	$299-25%
Performance per Dollar	50.9+12625%	0.4
Codename	GA104	GT200B
Release	December 1 2020	November 11 2008
Ranking	#73	#815

Search GeForce RTX 3060 Ti on Amazon

Search Quadro FX 560 on Amazon

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.