G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.

GeForce FX Go5650 vs GeForce RTX 3060 Ti FPS Benchmarks

Predicted gaming performance across popular games. Tested paired with Ryzen 7 9800X3D to isolate GPU performance.

Search any supported game below to compare 1080p FPS for both components.

GeForce FX Go5650 vs GeForce RTX 3060 Ti: Pros, Cons & Final Verdict

See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.

GeForce FX Go5650

2011

Why buy it

✅Draws 150W instead of 200W, a 50W reduction.

Trade-offs

❌Lower average FPS than GeForce RTX 3060 Ti across 50 tracked games in our benchmark data.
❌Less VRAM, with 512 MB vs 8 GB for high-resolution textures and newer games.
❌No DLSS support; it relies on Upscaling support instead.
❌2011 hardware with 512 MB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.
❌Lower G3D Mark per dollar, at 0 vs 50.9 G3D/$ (Unknown MSRP vs $399 MSRP).

GeForce RTX 3060 Ti

2020

Why buy it

✅16878.0% more average FPS across 50 tracked games in our benchmark data.
✅Delivers 100+% more G3D Mark for each dollar spent, at 50.9 vs 0 G3D/$ ($399 MSRP vs Unknown MSRP).
✅Access to DLSS 2 Super Resolution (2020).
✅1500% more VRAM for high-resolution textures and newer games (8 GB vs 512 MB).
✅Better long-term bet: Ampere (2020−2025) on 8nm gives it a newer hardware base for upcoming games.

Trade-offs

❌33.3% higher power demand at 200W vs 150W.

Quick Answers

Which GPU is faster for gaming right now?

GeForce RTX 3060 Ti is the faster gaming card right now. In our data, it leads by 16878.0% in average FPS across 50 tracked games in our benchmark data and by 119382.4% in PassMark G3D (20,312 vs 17), so the answer here is pretty clean.

Which GPU is the safer long-term pick for 2026 and beyond?

GeForce RTX 3060 Ti is the safer long-term pick for 2026 and beyond. The case is simple: 8 GB vs 512 MB of VRAM, the newer upscaling stack, DLSS 2 Super Resolution (2020) instead of no meaningful modern upscaling stack, a 8nm process instead of 40nm, and 38 vs 0 ray-tracing units. That gives it more room for heavier textures and higher settings over time.

Which GPU is the better buy today?

GeForce RTX 3060 Ti makes the most sense today based on the pricing and value data we have for this matchup.

GeForce FX Go5650 vs GeForce RTX 3060 Ti Technical Specifications

Side-by-side specs, architecture details, clocks, memory, power, and platform differences.

GeForce FX Go5650

The GeForce FX Go5650 is manufactured by NVIDIA. It was released in May 17 2011. It features the Rankine architecture. The core clock speed is 810 MHz. It has 336 shading units. The thermal design power (TDP) is 150W. Manufactured using 40 nm process technology. G3D Mark benchmark score: 17 points. Launch price was $199.

GeForce RTX 3060 Ti

The GeForce RTX 3060 Ti is manufactured by NVIDIA. It was released in December 1 2020. It features the Ampere architecture. The core clock ranges from 1410 MHz to 1665 MHz. It has 4864 shading units. The thermal design power (TDP) is 200W. Manufactured using 8 nm process technology. It features 38 dedicated ray tracing cores for enhanced lighting effects. G3D Mark benchmark score: 20,312 points. Launch price was $399.

⚡

Graphics Performance

In G3D Mark, the GeForce FX Go5650 scores 17 versus the GeForce RTX 3060 Ti's 20,312 — the GeForce RTX 3060 Ti leads by 119382.4%. The GeForce FX Go5650 is built on Rankine while the GeForce RTX 3060 Ti uses Ampere, both on 40 nm vs 8 nm. Shader units: 336 (GeForce FX Go5650) vs 4,864 (GeForce RTX 3060 Ti). Raw compute: 1.089 TFLOPS (GeForce FX Go5650) vs 16.2 TFLOPS (GeForce RTX 3060 Ti).

Feature	GeForce FX Go5650	GeForce RTX 3060 Ti
G3D Mark Score	17	20,312+119382%
Architecture	Rankine	Ampere
Process Node	40 nm	8 nm
Shading Units	336	4864+1348%
Compute (TFLOPS)	1.089 TFLOPS	16.2 TFLOPS+1388%
ROPs	32	80+150%
TMUs	56	152+171%
L1 Cache	0.44 MB	4.8 MB+991%
L2 Cache	0.5 MB	4 MB+700%

✨

Advanced Features (DLSS/FSR)

The GeForce RTX 3060 Ti supports the newer DLSS 2 Super Resolution, whereas the GeForce FX Go5650 is capped at Upscaling support.

Feature	GeForce FX Go5650	GeForce RTX 3060 Ti
Upscaling Tech	Upscaling support	DLSS 2 Super Resolution
Frame Generation	Not Supported	Not Supported
Ray Reconstruction	No	No
Low Latency	NVIDIA Reflex	NVIDIA Reflex

💾

Video Memory (VRAM)

The GeForce FX Go5650 has 512 MB of VRAM, while the GeForce RTX 3060 Ti carries 8 GB. GeForce RTX 3060 Ti gives you 1500% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 128-bit on the GeForce FX Go5650 and 256-bit on the GeForce RTX 3060 Ti. L2 Cache: 0.5 MB (GeForce FX Go5650) vs 4 MB (GeForce RTX 3060 Ti) — the GeForce RTX 3060 Ti has significantly larger on-die cache to reduce VRAM reliance.

Feature	GeForce FX Go5650	GeForce RTX 3060 Ti
VRAM Capacity	0.5 GB	8 GB+1500%
Memory Type	GDDR5	GDDR6
Memory Bandwidth	Unknown	448 GB/s
Bus Width	128-bit	256-bit+100%
L2 Cache	0.5 MB	4 MB+700%

🖥️

Display & API Support

DirectX support: 9.0a (GeForce FX Go5650) vs 12 Ultimate (12_2) (GeForce RTX 3060 Ti). OpenGL: 2.1 vs 4.6. Maximum simultaneous displays: 2 vs 4.

Feature	GeForce FX Go5650	GeForce RTX 3060 Ti
DirectX	9.0a	12 Ultimate (12_2)+33%
OpenGL	2.1	4.6+119%
Max Displays	2	4+100%

🎬

Media & Encoding

Hardware encoder: VPE 3.0 (GeForce FX Go5650) vs NVENC (Ampere) (GeForce RTX 3060 Ti). Decoder: VPE 3.0 vs NVDEC (Ampere). Supported codecs: MPEG-2 (GeForce FX Go5650) vs H.264,H.265,VP9,AV1 (GeForce RTX 3060 Ti).

Feature	GeForce FX Go5650	GeForce RTX 3060 Ti
Encoder	VPE 3.0	NVENC (Ampere)
Decoder	VPE 3.0	NVDEC (Ampere)
Codecs	MPEG-2	H.264,H.265,VP9,AV1

🔌

Power & Dimensions

The GeForce FX Go5650 draws 150W versus the GeForce RTX 3060 Ti's 200W — a 28.6% difference. The GeForce FX Go5650 is more power-efficient. Recommended PSU: 350W (GeForce FX Go5650) vs 600W (GeForce RTX 3060 Ti). Power connectors: Legacy vs 8-pin. Typical load temperature: 80°C vs 75.

Feature	GeForce FX Go5650	GeForce RTX 3060 Ti
TDP	150W-25%	200W
Recommended PSU	350W-42%	600W
Power Connector	Legacy	8-pin
Length	—	242mm
Height	—	112mm
Slots	0-100%	2
Temp (Load)	80°C	75-6%
Perf/Watt	0.1	101.6+101500%

💰

Value Analysis

The newer card here is GeForce RTX 3060 Ti (2020 vs 2011).

Feature	GeForce FX Go5650	GeForce RTX 3060 Ti
MSRP	—	$399
Codename	GF114	GA104
Release	May 17 2011	December 1 2020
Ranking	#605	#73

Search GeForce FX Go5650 on Amazon

Search GeForce RTX 3060 Ti on Amazon

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.