G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.

GeForce RTX 3050 6GB vs Quadro P400 FPS Benchmarks

Predicted gaming performance across popular games. Tested paired with Ryzen 7 9800X3D to isolate GPU performance.

Search any supported game below to compare 1080p FPS for both components.

GeForce RTX 3050 6GB vs Quadro P400: Pros, Cons & Final Verdict

See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.

GeForce RTX 3050 6GB

2024

Why buy it

✅394.6% more average FPS across 50 tracked games in our benchmark data.
✅Delivers 547.9% more G3D Mark for each dollar spent, at 63.6 vs 9.8 G3D/$ ($169 MSRP vs $169 MSRP).
✅Access to DLSS 2 Super Resolution (2020).
✅200% more VRAM for high-resolution textures and newer games (6 GB vs 2 GB).
✅Better long-term bet: Ampere (2020−2025) on 8nm gives it a newer hardware base for upcoming games.

Trade-offs

❌133.3% higher power demand at 70W vs 30W.
❌10.3% longer card at 160mm vs 145mm.

Quadro P400

2017

Why buy it

✅Draws 30W instead of 70W, a 40W reduction.
✅Measures 145mm instead of 160mm, a 15mm shorter card that is more SFF-friendly.

Trade-offs

❌Lower average FPS than GeForce RTX 3050 6GB across 50 tracked games in our benchmark data.
❌Less VRAM, with 2 GB vs 6 GB for high-resolution textures and newer games.
❌No DLSS support; it relies on Upscaling support instead.
❌2017 hardware with 2 GB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.
❌Lower G3D Mark per dollar, at 9.8 vs 63.6 G3D/$ ($169 MSRP vs $169 MSRP).

Quick Answers

Which GPU is faster for gaming right now?

GeForce RTX 3050 6GB is the faster gaming card right now. In our data, it leads by 394.6% in average FPS across 50 tracked games in our benchmark data and by 547.9% in PassMark G3D (10,749 vs 1,659), so the answer here is pretty clean.

Which GPU is the safer long-term pick for 2026 and beyond?

GeForce RTX 3050 6GB is the safer long-term pick for 2026 and beyond. The case is simple: 6 GB vs 2 GB of VRAM, the newer upscaling stack, DLSS 2 Super Resolution (2020) instead of no meaningful modern upscaling stack, a 8nm process instead of 14nm, and 18 vs 0 ray-tracing units. That gives it more room for heavier textures and higher settings over time.

Which GPU is the better buy today?

GeForce RTX 3050 6GB makes the most sense to buy today. It is priced the same on MSRP at $169 vs $169, and it leads G3D-per-dollar by 547.9% (63.6 vs 9.8), so the value case lines up with the gaming result.

GeForce RTX 3050 6GB vs Quadro P400 Technical Specifications

Side-by-side specs, architecture details, clocks, memory, power, and platform differences.

GeForce RTX 3050 6GB

The GeForce RTX 3050 6GB is manufactured by NVIDIA. It was released in February 2 2024. It features the Ampere architecture. The core clock ranges from 1042 MHz to 1470 MHz. It has 2304 shading units. The thermal design power (TDP) is 70W. Manufactured using 8 nm process technology. It features 18 dedicated ray tracing cores for enhanced lighting effects. G3D Mark benchmark score: 10,749 points. Launch price was $179.

Quadro P400

The Quadro P400 is manufactured by NVIDIA. It was released in February 7 2017. It features the Pascal architecture. The core clock ranges from 1228 MHz to 1252 MHz. It has 256 shading units. The thermal design power (TDP) is 30W. Manufactured using 14 nm process technology. G3D Mark benchmark score: 1,659 points. Launch price was $119.99.

⚡

Graphics Performance

In G3D Mark, the GeForce RTX 3050 6GB scores 10,749 versus the Quadro P400's 1,659 — the GeForce RTX 3050 6GB leads by 547.9%. The GeForce RTX 3050 6GB is built on Ampere while the Quadro P400 uses Pascal, both on 8 nm vs 14 nm. Shader units: 2,304 (GeForce RTX 3050 6GB) vs 256 (Quadro P400). Raw compute: 6.774 TFLOPS (GeForce RTX 3050 6GB) vs 0.641 TFLOPS (Quadro P400). Boost clocks: 1470 MHz vs 1252 MHz.

Feature	GeForce RTX 3050 6GB	Quadro P400
G3D Mark Score	10,749+548%	1,659
Architecture	Ampere	Pascal
Process Node	8 nm	14 nm
Shading Units	2304+800%	256
Compute (TFLOPS)	6.774 TFLOPS+957%	0.641 TFLOPS
Boost Clock	1470 MHz+17%	1252 MHz
ROPs	32+100%	16
TMUs	72+350%	16
L1 Cache	2.3 MB+2456%	0.09 MB
L2 Cache	2 MB+300%	0.5 MB

✨

Advanced Features (DLSS/FSR)

The GeForce RTX 3050 6GB gets NVIDIA DLSS, which still tends to look cleaner in motion. The Quadro P400 leans on FSR, which is flexible and widely supported, but usually a bit rougher at the same settings.

Feature	GeForce RTX 3050 6GB	Quadro P400
Upscaling Tech	DLSS 2 Super Resolution	Upscaling support
Frame Generation	Not Supported	Not Supported
Ray Reconstruction	No	No
Low Latency	NVIDIA Reflex	Standard

💾

Video Memory (VRAM)

The GeForce RTX 3050 6GB has 6 GB of VRAM, while the Quadro P400 carries 2 GB. GeForce RTX 3050 6GB gives you 200% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 96-bit on the GeForce RTX 3050 6GB and 64-bit on the Quadro P400. L2 Cache: 2 MB (GeForce RTX 3050 6GB) vs 0.5 MB (Quadro P400) — the GeForce RTX 3050 6GB has significantly larger on-die cache to reduce VRAM reliance.

Feature	GeForce RTX 3050 6GB	Quadro P400
VRAM Capacity	6 GB+200%	2 GB
Memory Type	GDDR6	GDDR5
Bus Width	96-bit+50%	64-bit
L2 Cache	2 MB+300%	0.5 MB

🖥️

Display & API Support

DirectX support: 12 Ultimate (GeForce RTX 3050 6GB) vs 12_1 (Quadro P400). Maximum simultaneous displays: 4 vs 3.

Feature	GeForce RTX 3050 6GB	Quadro P400
DirectX	12 Ultimate	12_1
Max Displays	4+33%	3

🎬

Media & Encoding

Hardware encoder: NVENC (5th Gen) (GeForce RTX 3050 6GB) vs NVENC 6th Gen (Quadro P400). Decoder: NVDEC (7th Gen) vs NVDEC 4th Gen.

Feature	GeForce RTX 3050 6GB	Quadro P400
Encoder	NVENC (5th Gen)	NVENC 6th Gen
Decoder	NVDEC (7th Gen)	NVDEC 4th Gen
Codecs	H.264,HEVC,AV1 (Decode Only)	—

🔌

Power & Dimensions

The GeForce RTX 3050 6GB draws 70W versus the Quadro P400's 30W — a 80% difference. The Quadro P400 is more power-efficient. Recommended PSU: 300W (GeForce RTX 3050 6GB) vs 350W (Quadro P400). Power connectors: None vs PCIe-powered. Card length: 160mm vs 145mm, occupying 2 vs 1 slots.

Feature	GeForce RTX 3050 6GB	Quadro P400
TDP	70W	30W-57%
Recommended PSU	300W-14%	350W
Power Connector	None	PCIe-powered
Length	160mm	145mm
Slots	2	1-50%
Temp (Load)	75°C	—
Perf/Watt	153.6+178%	55.3

💰

Value Analysis

At launch, the GeForce RTX 3050 6GB came in at $169, while the Quadro P400 launched at $169. Performance per dollar on MSRP (G3D Mark / MSRP): 63.6 (GeForce RTX 3050 6GB) vs 9.8 (Quadro P400) — the GeForce RTX 3050 6GB offers 549% better value. The newer card here is GeForce RTX 3050 6GB (2024 vs 2017).

Feature	GeForce RTX 3050 6GB	Quadro P400
MSRP	$169	$169
Performance per Dollar	63.6+549%	9.8
Codename	GA107	GP107
Release	February 2 2024	February 7 2017
Ranking	#252	#741

Search GeForce RTX 3050 6GB on Amazon

Search Quadro P400 on Amazon

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.