FirePro W5130M vs GeForce MX110

FirePro W5130M

2015Core: 900 MHzBoost: 925 MHz
VS
NVIDIA

GeForce MX110

2017Core: 978 MHzBoost: 1006 MHz

FirePro W5130M vs GeForce MX110 Performance Spectrum

About G3D Mark

G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.

FirePro W5130M vs GeForce MX110: Pros, Cons & Final Verdict

See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.

FirePro W5130M

2015

Why buy it

  • 700% more VRAM for high-resolution textures and newer games (4 GB vs 512 MB).

Trade-offs

  • 2015 hardware with 4 GB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.
  • Lower G3D Mark per dollar, at 0 vs 14.2 G3D/$ (Unknown MSRP vs $100 MSRP).
  • 400% higher power demand at 150W vs 30W.

GeForce MX110

2017

Why buy it

  • Delivers 100+% more G3D Mark for each dollar spent, at 14.2 vs 0 G3D/$ ($100 MSRP vs Unknown MSRP).
  • Draws 30W instead of 150W, a 120W reduction.

Trade-offs

  • Less VRAM, with 512 MB vs 4 GB for high-resolution textures and newer games.
  • 2017 hardware with 512 MB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.

Quick Answers

Which GPU is faster for gaming right now?
GeForce MX110 is the faster gaming card right now based on the synthetic data we have. It leads by 0.5% in PassMark G3D (1,415 vs 1,408), which is the best performance signal available in this matchup.
Which GPU is the safer long-term pick for 2026 and beyond?
FirePro W5130M is the safer long-term pick for 2026 and beyond. The case is simple: 4 GB vs 512 MB of VRAM. That gives it more room for heavier textures and higher settings over time.
Which GPU is the better buy today?
GeForce MX110 makes the most sense today based on the pricing and value data we have for this matchup. If you are mainly targeting 1080p and some 1440p, GeForce MX110 is the easier value choice. If you care more about 1080p and some 1440p headroom, FirePro W5130M has the stronger long-term case.

FirePro W5130M vs GeForce MX110 Technical Specifications

Side-by-side specs, architecture details, clocks, memory, power, and platform differences.

AMD

FirePro W5130M

The FirePro W5130M is manufactured by AMD. It was released in October 2 2015. It features the GCN 1.0 architecture. The core clock ranges from 900 MHz to 925 MHz. It has 512 shading units. The thermal design power (TDP) is 150W. Manufactured using 28 nm process technology. G3D Mark benchmark score: 1,408 points.

NVIDIA

GeForce MX110

The GeForce MX110 is manufactured by NVIDIA. It was released in November 17 2017. It features the Maxwell architecture. The core clock ranges from 978 MHz to 1006 MHz. It has 256 shading units. The thermal design power (TDP) is 30W. Manufactured using 28 nm process technology. G3D Mark benchmark score: 1,415 points.

Graphics Performance

The FirePro W5130M scores 1,408 and the GeForce MX110 reaches 1,415 in the G3D Mark benchmark — just a 0.5% difference, making them near-identical in rasterization performance. The FirePro W5130M is built on GCN 1.0 while the GeForce MX110 uses Maxwell, both on a 28 nm process. Shader units: 512 (FirePro W5130M) vs 256 (GeForce MX110). Raw compute: 0.9472 TFLOPS (FirePro W5130M) vs 0.5151 TFLOPS (GeForce MX110). Boost clocks: 925 MHz vs 1006 MHz.

FeatureFirePro W5130MGeForce MX110
G3D Mark Score
1,408
1,415
Architecture
GCN 1.0
Maxwell
Process Node
28 nm
28 nm
Shading Units
512+100%
256
Compute (TFLOPS)
0.9472 TFLOPS+84%
0.5151 TFLOPS
Boost Clock
925 MHz
1006 MHz+9%
ROPs
16+100%
8
TMUs
32+100%
16
L1 Cache
128 KB
128 KB
L2 Cache
0.25 MB
1 MB+300%

Advanced Features (DLSS/FSR)

The GeForce MX110 gets NVIDIA DLSS, which still tends to look cleaner in motion. The FirePro W5130M leans on FSR, which is flexible and widely supported, but usually a bit rougher at the same settings.

FeatureFirePro W5130MGeForce MX110
Upscaling Tech
Upscaling support
Upscaling support
Frame Generation
Not Supported
Not Supported
Ray Reconstruction
No
No
Low Latency
Standard
NVIDIA Reflex
💾

Video Memory (VRAM)

The FirePro W5130M has 4 GB of VRAM, while the GeForce MX110 carries 512 MB. FirePro W5130M gives you 700% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 64-bit on the FirePro W5130M and 64-bit on the GeForce MX110. L2 Cache: 0.25 MB (FirePro W5130M) vs 1 MB (GeForce MX110) — the GeForce MX110 has significantly larger on-die cache to reduce VRAM reliance.

FeatureFirePro W5130MGeForce MX110
VRAM Capacity
4 GB+700%
0.5 GB
Memory Type
GDDR5
GDDR5
Bus Width
64-bit
64-bit
L2 Cache
0.25 MB
1 MB+300%
🔌

Power & Dimensions

The FirePro W5130M draws 150W versus the GeForce MX110's 30W — a 133.3% difference. The GeForce MX110 is more power-efficient. Recommended PSU: 350W (FirePro W5130M) vs 350W (GeForce MX110). Power connectors: PCIe-powered vs Mobile.

FeatureFirePro W5130MGeForce MX110
TDP
150W
30W-80%
Recommended PSU
350W
350W
Power Connector
PCIe-powered
Mobile
Length
0mm
Height
0mm
Slots
0
Temp (Load)
70
Perf/Watt
9.4
47.2+402%
💰

Value Analysis

The newer card here is GeForce MX110 (2017 vs 2015).

FeatureFirePro W5130MGeForce MX110
MSRP
$100
Codename
Tropo
GM108S
Release
October 2 2015
November 17 2017
Ranking
#783
#781

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.