G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.

GeForce RTX 3050 6GB vs Quadro M4000M FPS Benchmarks

Predicted gaming performance across popular games. Tested paired with Ryzen 7 9800X3D to isolate GPU performance.

Search any supported game below to compare 1080p FPS for both components.

GeForce RTX 3050 6GB vs Quadro M4000M: Pros, Cons & Final Verdict

See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.

GeForce RTX 3050 6GB

2024

Why buy it

✅45.4% more average FPS across 50 tracked games in our benchmark data.
✅Delivers 100+% more G3D Mark for each dollar spent, at 63.6 vs 0 G3D/$ ($169 MSRP vs Unknown MSRP).
✅Access to DLSS 2 Super Resolution (2020).
✅50% more VRAM for high-resolution textures and newer games (6 GB vs 4 GB).
✅Better long-term bet: Ampere (2020−2025) on 8nm gives it a newer hardware base for upcoming games.

Trade-offs

❌Fewer clear downsides in this head-to-head, aside from the usual pricing and availability swings.

Quadro M4000M

2015

Why buy it

✅Competitive enough if your priority is price, power, or specific feature preference.

Trade-offs

❌Lower average FPS than GeForce RTX 3050 6GB across 50 tracked games in our benchmark data.
❌Less VRAM, with 4 GB vs 6 GB for high-resolution textures and newer games.
❌No DLSS support; it relies on Upscaling support instead.
❌2015 hardware with 4 GB of VRAM already sits in legacy territory for modern games.
❌Lower G3D Mark per dollar, at 0 vs 63.6 G3D/$ (Unknown MSRP vs $169 MSRP).

Quick Answers

Which GPU is faster for gaming right now?

GeForce RTX 3050 6GB is the faster gaming card right now. In our data, it leads by 45.4% in average FPS across 50 tracked games in our benchmark data and by 74.8% in PassMark G3D (10,749 vs 6,148), so the answer here is pretty clean.

Which GPU is the safer long-term pick for 2026 and beyond?

GeForce RTX 3050 6GB is the safer long-term pick for 2026 and beyond. The case is simple: 6 GB vs 4 GB of VRAM, the newer upscaling stack, DLSS 2 Super Resolution (2020) instead of no meaningful modern upscaling stack, a 8nm process instead of 28nm, and 18 vs 0 ray-tracing units. That gives it more room for heavier textures and higher settings over time.

Which GPU is the better buy today?

GeForce RTX 3050 6GB makes the most sense today based on the pricing and value data we have for this matchup.

GeForce RTX 3050 6GB vs Quadro M4000M Technical Specifications

Side-by-side specs, architecture details, clocks, memory, power, and platform differences.

GeForce RTX 3050 6GB

The GeForce RTX 3050 6GB is manufactured by NVIDIA. It was released in February 2 2024. It features the Ampere architecture. The core clock ranges from 1042 MHz to 1470 MHz. It has 2304 shading units. The thermal design power (TDP) is 70W. Manufactured using 8 nm process technology. It features 18 dedicated ray tracing cores for enhanced lighting effects. G3D Mark benchmark score: 10,749 points. Launch price was $179.

Quadro M4000M

The Quadro M4000M is manufactured by NVIDIA. It was released in August 18 2015. It features the Maxwell 2.0 architecture. The core clock ranges from 975 MHz to 1013 MHz. It has 1,280 shading units. The thermal design power (TDP) is 100W. Manufactured using 28 nm process technology. G3D Mark benchmark score: 6,148 points.

⚡

Graphics Performance

In G3D Mark, the GeForce RTX 3050 6GB scores 10,749 versus the Quadro M4000M's 6,148 — the GeForce RTX 3050 6GB leads by 74.8%. The GeForce RTX 3050 6GB is built on Ampere while the Quadro M4000M uses Maxwell 2.0, both on 8 nm vs 28 nm. Shader units: 2,304 (GeForce RTX 3050 6GB) vs 1 (Quadro M4000M). Raw compute: 6.774 TFLOPS (GeForce RTX 3050 6GB) vs 2.496 TFLOPS (Quadro M4000M). Boost clocks: 1470 MHz vs 1013 MHz.

Feature	GeForce RTX 3050 6GB	Quadro M4000M
G3D Mark Score	10,749+75%	6,148
Architecture	Ampere	Maxwell 2.0
Process Node	8 nm	28 nm
Shading Units	2304+80%	1,280
Compute (TFLOPS)	6.774 TFLOPS+171%	2.496 TFLOPS
Boost Clock	1470 MHz+45%	1013 MHz
ROPs	32	64+100%
TMUs	72	80+11%
L1 Cache	2.3 MB+389%	0.47 MB
L2 Cache	2 MB	2 MB

✨

Advanced Features (DLSS/FSR)

The GeForce RTX 3050 6GB gets NVIDIA DLSS, which still tends to look cleaner in motion. The Quadro M4000M leans on FSR, which is flexible and widely supported, but usually a bit rougher at the same settings.

Feature	GeForce RTX 3050 6GB	Quadro M4000M
Upscaling Tech	DLSS 2 Super Resolution	Upscaling support
Frame Generation	Not Supported	Not Supported
Ray Reconstruction	No	No
Low Latency	NVIDIA Reflex	Standard

💾

Video Memory (VRAM)

The GeForce RTX 3050 6GB has 6 GB of VRAM, while the Quadro M4000M carries 4 GB. GeForce RTX 3050 6GB gives you 50% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 96-bit on the GeForce RTX 3050 6GB and 256-bit on the Quadro M4000M.

Feature	GeForce RTX 3050 6GB	Quadro M4000M
VRAM Capacity	6 GB+50%	4 GB
Memory Type	GDDR6	GDDR6
Bus Width	96-bit	256-bit+167%
L2 Cache	2 MB	2 MB

🖥️

Display & API Support

DirectX support: 12 Ultimate (GeForce RTX 3050 6GB) vs 12 (12_1) (Quadro M4000M). Vulkan: 1.3 vs 1.3. OpenGL: 4.6 vs 4.6. Maximum simultaneous displays: 4 vs 4.

Feature	GeForce RTX 3050 6GB	Quadro M4000M
DirectX	12 Ultimate	12 (12_1)
Vulkan	1.3	1.3
OpenGL	4.6	4.6
Max Displays	4	4

🎬

Media & Encoding

Hardware encoder: NVENC (5th Gen) (GeForce RTX 3050 6GB) vs NVENC 5 (Quadro M4000M). Decoder: NVDEC (7th Gen) vs NVDEC 1. Supported codecs: H.264,HEVC,AV1 (Decode Only) (GeForce RTX 3050 6GB) vs H.264,MPEG-2,MPEG-4,VC-1,DivX (Quadro M4000M).

Feature	GeForce RTX 3050 6GB	Quadro M4000M
Encoder	NVENC (5th Gen)	NVENC 5
Decoder	NVDEC (7th Gen)	NVDEC 1
Codecs	H.264,HEVC,AV1 (Decode Only)	H.264,MPEG-2,MPEG-4,VC-1,DivX

🔌

Power & Dimensions

The GeForce RTX 3050 6GB draws 70W versus the Quadro M4000M's 100W — a 35.3% difference. The GeForce RTX 3050 6GB is more power-efficient. Recommended PSU: 300W (GeForce RTX 3050 6GB) vs 350W (Quadro M4000M). Power connectors: None vs PCIe-powered. Typical load temperature: 75°C vs 80°C.

Feature	GeForce RTX 3050 6GB	Quadro M4000M
TDP	70W-30%	100W
Recommended PSU	300W-14%	350W
Power Connector	None	PCIe-powered
Length	160mm	—
Slots	2	1-50%
Temp (Load)	75°C-6%	80°C
Perf/Watt	153.6+150%	61.5

💰

Value Analysis

The newer card here is GeForce RTX 3050 6GB (2024 vs 2015).

Feature	GeForce RTX 3050 6GB	Quadro M4000M
MSRP	$169	—
Codename	GA107	GM204
Release	February 2 2024	August 18 2015
Ranking	#252	#392

Search GeForce RTX 3050 6GB on Amazon

Search Quadro M4000M on Amazon

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.