FirePro M4000
GeForce RTX 3060 Ti
FirePro M4000 vs GeForce RTX 3060 Ti Performance Spectrum
About G3D Mark
G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.
FirePro M4000 vs GeForce RTX 3060 Ti FPS Benchmarks
Predicted gaming performance across popular games. Tested paired with Ryzen 7 9800X3D to isolate GPU performance.
Search any supported game below to compare 1080p FPS for both components.
Path of Exile 2
Counter-Strike 2
League of Legends
FirePro M4000 vs GeForce RTX 3060 Ti: Pros, Cons & Final Verdict
See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.
FirePro M4000
2012Why buy it
- ✅Draws 33W instead of 200W, a 167W reduction.
- ✅Measures 82mm instead of 242mm, a 160mm shorter card that is more SFF-friendly.
Trade-offs
- ❌Lower PassMark G3D performance (1,596 vs 20,312).
- ❌Less VRAM, with 2 GB vs 8 GB for high-resolution textures and newer games.
- ❌No DLSS support; it relies on Upscaling support instead.
- ❌2012 hardware with 2 GB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.
- ❌Lower G3D Mark per dollar, at 0 vs 50.9 G3D/$ (Unknown MSRP vs $399 MSRP).
GeForce RTX 3060 Ti
2020Why buy it
- ✅+1172.7% higher PassMark G3D performance.
- ✅Delivers 100+% more G3D Mark for each dollar spent, at 50.9 vs 0 G3D/$ ($399 MSRP vs Unknown MSRP).
- ✅Access to DLSS 2 Super Resolution (2020).
- ✅300% more VRAM for high-resolution textures and newer games (8 GB vs 2 GB).
- ✅Better long-term bet: Ampere (2020−2025) on 8nm gives it a newer hardware base for upcoming games.
Trade-offs
- ❌506.1% higher power demand at 200W vs 33W.
- ❌195.1% longer card at 242mm vs 82mm.
Quick Answers
Which GPU is faster for gaming right now?
Which GPU is the safer long-term pick for 2026 and beyond?
Which GPU is the better buy today?
FirePro M4000 vs GeForce RTX 3060 Ti Technical Specifications
Side-by-side specs, architecture details, clocks, memory, power, and platform differences.
FirePro M4000
The FirePro M4000 is manufactured by AMD. It was released in June 27 2012. It features the GCN 1.0 architecture. The core clock speed is 675 MHz. It has 512 shading units. The thermal design power (TDP) is 33W. Manufactured using 28 nm process technology. G3D Mark benchmark score: 1,596 points.
GeForce RTX 3060 Ti
The GeForce RTX 3060 Ti is manufactured by NVIDIA. It was released in December 1 2020. It features the Ampere architecture. The core clock ranges from 1410 MHz to 1665 MHz. It has 4864 shading units. The thermal design power (TDP) is 200W. Manufactured using 8 nm process technology. It features 38 dedicated ray tracing cores for enhanced lighting effects. G3D Mark benchmark score: 20,312 points. Launch price was $399.
Graphics Performance
In G3D Mark, the FirePro M4000 scores 1,596 versus the GeForce RTX 3060 Ti's 20,312 — the GeForce RTX 3060 Ti leads by 1172.7%. The FirePro M4000 is built on GCN 1.0 while the GeForce RTX 3060 Ti uses Ampere, both on 28 nm vs 8 nm. Shader units: 512 (FirePro M4000) vs 4,864 (GeForce RTX 3060 Ti). Raw compute: 0.6912 TFLOPS (FirePro M4000) vs 16.2 TFLOPS (GeForce RTX 3060 Ti).
| Feature | FirePro M4000 | GeForce RTX 3060 Ti |
|---|---|---|
| G3D Mark Score | 1,596 | 20,312+1173% |
| Architecture | GCN 1.0 | Ampere |
| Process Node | 28 nm | 8 nm |
| Shading Units | 512 | 4864+850% |
| Compute (TFLOPS) | 0.6912 TFLOPS | 16.2 TFLOPS+2244% |
| ROPs | 16 | 80+400% |
| TMUs | 32 | 152+375% |
| L1 Cache | 0.13 MB | 4.8 MB+3592% |
| L2 Cache | 0.25 MB | 4 MB+1500% |
Advanced Features (DLSS/FSR)
The GeForce RTX 3060 Ti gets NVIDIA DLSS, which still tends to look cleaner in motion. The FirePro M4000 leans on FSR, which is flexible and widely supported, but usually a bit rougher at the same settings.
| Feature | FirePro M4000 | GeForce RTX 3060 Ti |
|---|---|---|
| Upscaling Tech | Upscaling support | DLSS 2 Super Resolution |
| Frame Generation | Not Supported | Not Supported |
| Ray Reconstruction | No | No |
| Low Latency | Standard | NVIDIA Reflex |
Video Memory (VRAM)
The FirePro M4000 has 2 GB of VRAM, while the GeForce RTX 3060 Ti carries 8 GB. GeForce RTX 3060 Ti gives you 300% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 64-bit on the FirePro M4000 and 256-bit on the GeForce RTX 3060 Ti. L2 Cache: 0.25 MB (FirePro M4000) vs 4 MB (GeForce RTX 3060 Ti) — the GeForce RTX 3060 Ti has significantly larger on-die cache to reduce VRAM reliance.
| Feature | FirePro M4000 | GeForce RTX 3060 Ti |
|---|---|---|
| VRAM Capacity | 2 GB | 8 GB+300% |
| Memory Type | GDDR5 | GDDR6 |
| Bus Width | 64-bit | 256-bit+300% |
| L2 Cache | 0.25 MB | 4 MB+1500% |
Display & API Support
DirectX support: 12 (FirePro M4000) vs 12 Ultimate (12_2) (GeForce RTX 3060 Ti). Vulkan: 1.2 vs 1.3. OpenGL: 4.6 vs 4.6. Maximum simultaneous displays: 6 vs 4.
| Feature | FirePro M4000 | GeForce RTX 3060 Ti |
|---|---|---|
| DirectX | 12 | 12 Ultimate (12_2) |
| Vulkan | 1.2 | 1.3+8% |
| OpenGL | 4.6 | 4.6 |
| Max Displays | 6+50% | 4 |
Media & Encoding
Hardware encoder: VCE 1.0 (FirePro M4000) vs NVENC (Ampere) (GeForce RTX 3060 Ti). Decoder: UVD 4.0 vs NVDEC (Ampere). Supported codecs: H.264,VC-1,MPEG-2,MPEG-4 (FirePro M4000) vs H.264,H.265,VP9,AV1 (GeForce RTX 3060 Ti).
| Feature | FirePro M4000 | GeForce RTX 3060 Ti |
|---|---|---|
| Encoder | VCE 1.0 | NVENC (Ampere) |
| Decoder | UVD 4.0 | NVDEC (Ampere) |
| Codecs | H.264,VC-1,MPEG-2,MPEG-4 | H.264,H.265,VP9,AV1 |
Power & Dimensions
The FirePro M4000 draws 33W versus the GeForce RTX 3060 Ti's 200W — a 143.3% difference. The FirePro M4000 is more power-efficient. Recommended PSU: 350W (FirePro M4000) vs 600W (GeForce RTX 3060 Ti). Power connectors: PCIe-powered vs 8-pin. Card length: 82mm vs 242mm, occupying 1 vs 2 slots. Typical load temperature: 75°C vs 75.
| Feature | FirePro M4000 | GeForce RTX 3060 Ti |
|---|---|---|
| TDP | 33W-84% | 200W |
| Recommended PSU | 350W-42% | 600W |
| Power Connector | PCIe-powered | 8-pin |
| Length | 82mm | 242mm |
| Height | 0mm | 112mm |
| Slots | 1-50% | 2 |
| Temp (Load) | 75°C | 75 |
| Perf/Watt | 48.4 | 101.6+110% |
Value Analysis
At launch, the FirePro M4000 came in at $0, while the GeForce RTX 3060 Ti launched at $399. On MSRP, FirePro M4000 was 100+% cheaper ($399 less). Performance per dollar on MSRP (G3D Mark / MSRP): Infinity (FirePro M4000) vs 50.9 (GeForce RTX 3060 Ti) — the FirePro M4000 offers Infinity% better value. The newer card here is GeForce RTX 3060 Ti (2020 vs 2012).
| Feature | FirePro M4000 | GeForce RTX 3060 Ti |
|---|---|---|
| MSRP | $0-100% | $399 |
| Performance per Dollar | Infinity | 50.9 |
| Codename | Chelsea | GA104 |
| Release | June 27 2012 | December 1 2020 |
| Ranking | #752 | #73 |
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
Top Performing GPUs
The most powerful gpus ranked by G3D Mark benchmark scores.
You May Also Compare
Similar GPU comparisons based on FirePro M4000 and GeForce RTX 3060 Ti
