Chipversus Index
Jump to Section

FirePro M7740 vs GeForce RTX 3060

CPUCPUGPUGPU

FirePro M7740

2012Core: 675 MHz
Buy on Amazon
VS
NVIDIA

GeForce RTX 3060

2021Core: 1320 MHzBoost: 1777 MHz
Buy on Amazon

FirePro M7740 vs GeForce RTX 3060 Performance Spectrum

FirePro M7740
1 GB 33
665
0.0%
brand logoMobility Radeon HD 3850
brand logoMobility Radeon HD 5650
brand logoRadeon HD 8670D
brand logoRadeon HD 3870 X2
brand logoRadeon RX 6300
brand logoRadeon RX 7600M
brand logoRadeon RX 7600M XT
brand logoRadeon RX 6700 XT
GeForce RTX 3060
12 GB 170
16,995
+2455.6%
brand logoGeForce RTX 3050 4GB Mobile
brand logoGeForce RTX 2060 (Mobile)
brand logoGeForce RTX 3060 Laptop GPU
brand logoRTX 2000 Ada Generation Embedded GPU
brand logoTITAN V
brand logoGeForce RTX 4060 Ti 16GB
brand logoGeForce RTX 5070 Ti Mobile
brand logoGeForce RTX 5070

About G3D Mark

G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.

FirePro M7740 vs GeForce RTX 3060: Pros, Cons & Final Verdict

See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.

FirePro M7740

2012

Why buy it

  • ✅Draws 33W instead of 170W, a 137W reduction.

Trade-offs

  • ❌Lower PassMark G3D performance (665 vs 16,995).
  • ❌Less VRAM, with 1 GB vs 12 GB for high-resolution textures and newer games.
  • ❌No DLSS support; it relies on Upscaling support instead.
  • ❌2012 hardware with 1 GB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.
  • ❌
    52% HIGHER MSRP
    $500 MSRPvs$329 MSRP

GeForce RTX 3060

2021

Why buy it

  • ✅+2455.6% higher PassMark G3D performance.
  • ✅Costs $171 less on MSRP ($329 MSRP vs $500 MSRP).
  • ✅Delivers 3783.9% more G3D Mark for each dollar spent, at 51.7 vs 1.3 G3D/$ ($329 MSRP vs $500 MSRP).
  • ✅Access to DLSS 2 Super Resolution (2020).
  • ✅1100% more VRAM for high-resolution textures and newer games (12 GB vs 1 GB).

Trade-offs

  • ❌415.2% higher power demand at 170W vs 33W.

Quick Answers

Which GPU is faster for gaming right now?
GeForce RTX 3060 is the faster gaming card right now based on the synthetic data we have. It leads by 2455.6% in PassMark G3D (16,995 vs 665), which is the best performance signal available in this matchup.
Which GPU is the safer long-term pick for 2026 and beyond?
GeForce RTX 3060 is the safer long-term pick for 2026 and beyond. The case is simple: 12 GB vs 1 GB of VRAM, the newer upscaling stack, DLSS 2 Super Resolution (2020) instead of no meaningful modern upscaling stack, a 8nm process instead of 28nm, and 28 vs 0 ray-tracing units. That gives it more room for heavier textures and higher settings over time.
Which GPU is the better buy today?
GeForce RTX 3060 makes the most sense to buy today. It is $171 cheaper on MSRP at $329 vs $500, and it leads G3D-per-dollar by 3783.9% (51.7 vs 1.3), so the value case lines up with the gaming result.

FirePro M7740 vs GeForce RTX 3060 Technical Specifications

Side-by-side specs, architecture details, clocks, memory, power, and platform differences.

AMD

FirePro M7740

The FirePro M7740 is manufactured by AMD. It was released in June 27 2012. It features the GCN 1.0 architecture. The core clock speed is 675 MHz. It has 512 shading units. The thermal design power (TDP) is 33W. Manufactured using 28 nm process technology. G3D Mark benchmark score: 665 points.

NVIDIA

GeForce RTX 3060

The GeForce RTX 3060 is manufactured by NVIDIA. It was released in January 12 2021. It features the Ampere architecture. The core clock ranges from 1320 MHz to 1777 MHz. It has 3584 shading units. The thermal design power (TDP) is 170W. Manufactured using 8 nm process technology. It features 28 dedicated ray tracing cores for enhanced lighting effects. G3D Mark benchmark score: 16,995 points. Launch price was $329.

⚡

Graphics Performance

In G3D Mark, the FirePro M7740 scores 665 versus the GeForce RTX 3060's 16,995 — the GeForce RTX 3060 leads by 2455.6%. The FirePro M7740 is built on GCN 1.0 while the GeForce RTX 3060 uses Ampere, both on 28 nm vs 8 nm. Shader units: 512 (FirePro M7740) vs 3,584 (GeForce RTX 3060). Raw compute: 0.6912 TFLOPS (FirePro M7740) vs 12.74 TFLOPS (GeForce RTX 3060).

FeatureFirePro M7740GeForce RTX 3060
G3D Mark Score
665
16,995+2456%
Architecture
GCN 1.0
Ampere
Process Node
28 nm
8 nm
Shading Units
512
3584+600%
Compute (TFLOPS)
0.6912 TFLOPS
12.74 TFLOPS+1743%
ROPs
16
48+200%
TMUs
32
112+250%
L1 Cache
0.13 MB
3.5 MB+2592%
L2 Cache
0.25 MB
3 MB+1100%
✨

Advanced Features (DLSS/FSR)

The GeForce RTX 3060 gets NVIDIA DLSS, which still tends to look cleaner in motion. The FirePro M7740 leans on FSR, which is flexible and widely supported, but usually a bit rougher at the same settings.

FeatureFirePro M7740GeForce RTX 3060
Upscaling Tech
Upscaling support
DLSS 2 Super Resolution
Frame Generation
Not Supported
Not Supported
Ray Reconstruction
No
No
Low Latency
Standard
NVIDIA Reflex
💾

Video Memory (VRAM)

The FirePro M7740 has 1 GB of VRAM, while the GeForce RTX 3060 carries 12 GB. GeForce RTX 3060 gives you 1100% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 64-bit on the FirePro M7740 and 192-bit on the GeForce RTX 3060. L2 Cache: 0.25 MB (FirePro M7740) vs 3 MB (GeForce RTX 3060) — the GeForce RTX 3060 has significantly larger on-die cache to reduce VRAM reliance.

FeatureFirePro M7740GeForce RTX 3060
VRAM Capacity
1 GB
12 GB+1100%
Memory Type
GDDR5
GDDR6
Bus Width
64-bit
192-bit+200%
L2 Cache
0.25 MB
3 MB+1100%
🖥️

Display & API Support

DirectX support: 10.1 (FirePro M7740) vs 12 Ultimate (GeForce RTX 3060). Vulkan: None vs 1.3. OpenGL: 3.3 vs 4.6. Maximum simultaneous displays: 2 vs 4.

FeatureFirePro M7740GeForce RTX 3060
DirectX
10.1
12 Ultimate+19%
Vulkan
None
1.3
OpenGL
3.3
4.6+39%
Max Displays
2
4+100%
🎬

Media & Encoding

Hardware encoder: None (FirePro M7740) vs NVENC 7th Gen (GeForce RTX 3060). Decoder: UVD 2 vs NVDEC 5th Gen. Supported codecs: H.264,VC-1,MPEG-2 (FirePro M7740) vs AV1,H.265,H.264,VP9 (GeForce RTX 3060).

FeatureFirePro M7740GeForce RTX 3060
Encoder
None
NVENC 7th Gen
Decoder
UVD 2
NVDEC 5th Gen
Codecs
H.264,VC-1,MPEG-2
AV1,H.265,H.264,VP9
🔌

Power & Dimensions

The FirePro M7740 draws 33W versus the GeForce RTX 3060's 170W — a 135% difference. The FirePro M7740 is more power-efficient. Recommended PSU: 350W (FirePro M7740) vs 550W (GeForce RTX 3060). Power connectors: PCIe-powered vs 8-pin. Card length: 0mm vs 242mm, occupying 1 vs 2 slots. Typical load temperature: 85°C vs 75.

FeatureFirePro M7740GeForce RTX 3060
TDP
33W-81%
170W
Recommended PSU
350W-36%
550W
Power Connector
PCIe-powered
8-pin
Length
0mm
242mm
Height
0mm
112mm
Slots
1-50%
2
Temp (Load)
85°C
75-12%
Perf/Watt
20.2
100.0+395%
💰

Value Analysis

At launch, the FirePro M7740 came in at $500, while the GeForce RTX 3060 launched at $329. On MSRP, GeForce RTX 3060 was 34.2% cheaper ($171 less). Performance per dollar on MSRP (G3D Mark / MSRP): 1.3 (FirePro M7740) vs 51.7 (GeForce RTX 3060) — the GeForce RTX 3060 offers 3876.9% better value. The newer card here is GeForce RTX 3060 (2021 vs 2012).

FeatureFirePro M7740GeForce RTX 3060
MSRP
$500
$329-34%
Performance per Dollar
1.3
51.7+3877%
Codename
Chelsea
GA106
Release
June 27 2012
January 12 2021
Ranking
#752
#114
Search FirePro M7740 on AmazonSearch GeForce RTX 3060 on Amazon

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.