FirePro S10000 vs GeForce GTX 580

FirePro S10000

2012Core: 825 MHzBoost: 950 MHz
Similar parts
·······
VS
NVIDIA

GeForce GTX 580

2010Core: 772 MHz
Similar parts
·

FirePro S10000 vs GeForce GTX 580 Performance Spectrum

About G3D Mark

G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.

FirePro S10000 vs GeForce GTX 580: Pros, Cons & Final Verdict

See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.

FirePro S10000

2012

Why buy it

  • 33.3% more VRAM for high-resolution textures and newer games (4 GB vs 3 GB).
  • More future proof: GCN 1.0 (2012−2020) on 28nm with a newer platform for upcoming games.

Trade-offs

  • 2012 hardware with 4 GB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.
  • 621.2% HIGHER MSRP
    $3,599 MSRPvs$499 MSRP
  • Lower G3D Mark per dollar, at 1.3 vs 9.3 G3D/$ ($3,599 MSRP vs $499 MSRP).
  • 53.7% higher power demand at 375W vs 244W.
  • 14.2% longer card at 305mm vs 267mm.

GeForce GTX 580

2010

Why buy it

  • Costs $3,100 less on MSRP ($499 MSRP vs $3,599 MSRP).
  • Delivers 636.7% more G3D Mark for each dollar spent, at 9.3 vs 1.3 G3D/$ ($499 MSRP vs $3,599 MSRP).
  • Draws 244W instead of 375W, a 131W reduction.
  • Measures 267mm instead of 305mm, a 38mm shorter card that is more SFF-friendly.

Trade-offs

  • Less VRAM, with 3 GB vs 4 GB for high-resolution textures and newer games.
  • 2010 hardware with 3 GB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.

Quick Answers

Which GPU is faster for gaming right now?
GeForce GTX 580 is the faster gaming card right now based on the synthetic data we have. It leads by 2.1% in PassMark G3D (4,634 vs 4,537), which is the best performance signal available in this matchup.
Which GPU is the safer long-term pick for 2026 and beyond?
FirePro S10000 is the safer long-term pick for 2026 and beyond. The case is simple: 4 GB vs 3 GB of VRAM, a 28nm process instead of 40nm, and a newer 2012 generation instead of 2010. That gives it more room for heavier textures and higher settings over time.
Which GPU is the better buy today?
GeForce GTX 580 makes the most sense to buy today. It is $3,100 cheaper on MSRP at $499 vs $3,599, and it leads G3D-per-dollar by 636.7% (9.3 vs 1.3), so the value case lines up with the gaming result. If you are mainly targeting 1080p and some 1440p, GeForce GTX 580 is the easier value choice. If you care more about 1080p and some 1440p headroom, FirePro S10000 has the stronger long-term case.

FirePro S10000 vs GeForce GTX 580 Technical Specifications

Side-by-side specs, architecture details, clocks, memory, power, and platform differences.

AMD

FirePro S10000

The FirePro S10000 is manufactured by AMD. It was released in November 12 2012. It features the GCN 1.0 architecture. The core clock ranges from 825 MHz to 950 MHz. It has 4096 ×2 shading units. The thermal design power (TDP) is 375W. Manufactured using 28 nm process technology. G3D Mark benchmark score: 4,537 points. Launch price was $3,599.

NVIDIA

GeForce GTX 580

The GeForce GTX 580 is manufactured by NVIDIA. It was released in November 9 2010. It features the Fermi 2.0 architecture. The core clock speed is 772 MHz. It has 512 shading units. The thermal design power (TDP) is 244W. Manufactured using 40 nm process technology. G3D Mark benchmark score: 4,634 points. Launch price was $499.

Graphics Performance

The FirePro S10000 scores 4,537 and the GeForce GTX 580 reaches 4,634 in the G3D Mark benchmark — just a 2.1% difference, making them near-identical in rasterization performance. The FirePro S10000 is built on GCN 1.0 while the GeForce GTX 580 uses Fermi 2.0, both on 28 nm vs 40 nm. Shader units: 4,096 (FirePro S10000) vs 512 (GeForce GTX 580). Raw compute: 3.405 TFLOPS ×2 (FirePro S10000) vs 1.581 TFLOPS (GeForce GTX 580).

FeatureFirePro S10000GeForce GTX 580
G3D Mark Score
4,537
4,634+2%
Architecture
GCN 1.0
Fermi 2.0
Process Node
28 nm
40 nm
Shading Units
4096 ×2+700%
512
Compute (TFLOPS)
3.405 TFLOPS ×2+115%
1.581 TFLOPS
ROPs
32 ×2
48+50%
TMUs
112 ×2+75%
64
L1 Cache
0.44 MB
1 MB+127%
L2 Cache
768 KB
768 KB

Advanced Features (DLSS/FSR)

The GeForce GTX 580 gets NVIDIA DLSS, which still tends to look cleaner in motion. The FirePro S10000 leans on FSR, which is flexible and widely supported, but usually a bit rougher at the same settings.

FeatureFirePro S10000GeForce GTX 580
Upscaling Tech
Upscaling support
Upscaling support
Frame Generation
Not Supported
Not Supported
Ray Reconstruction
No
No
Low Latency
Standard
NVIDIA Reflex
💾

Video Memory (VRAM)

The FirePro S10000 has 4 GB of VRAM, while the GeForce GTX 580 carries 3 GB. FirePro S10000 gives you 33.3% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 64-bit on the FirePro S10000 and 384-bit on the GeForce GTX 580.

FeatureFirePro S10000GeForce GTX 580
VRAM Capacity
4 GB+33%
3 GB
Memory Type
GDDR5
GDDR5
Bus Width
64-bit
384-bit+500%
L2 Cache
768 KB
768 KB
🖥️

Display & API Support

DirectX support: 12 (FirePro S10000) vs 12 (11_0) (GeForce GTX 580). Vulkan: 1.2 vs N/A. OpenGL: 4.6 vs 4.6. Maximum simultaneous displays: 6 vs 2.

FeatureFirePro S10000GeForce GTX 580
DirectX
12
12 (11_0)
Vulkan
1.2
N/A
OpenGL
4.6
4.6
Max Displays
6+200%
2
🎬

Media & Encoding

Hardware encoder: VCE 1.0 (FirePro S10000) vs None (GeForce GTX 580). Decoder: UVD 3.2 vs PureVideo HD VP4. Supported codecs: H.264,VC-1,MPEG-2 (FirePro S10000) vs H.264,MPEG-2,VC-1 (GeForce GTX 580).

FeatureFirePro S10000GeForce GTX 580
Encoder
VCE 1.0
None
Decoder
UVD 3.2
PureVideo HD VP4
Codecs
H.264,VC-1,MPEG-2
H.264,MPEG-2,VC-1
🔌

Power & Dimensions

The FirePro S10000 draws 375W versus the GeForce GTX 580's 244W — a 42.3% difference. The GeForce GTX 580 is more power-efficient. Recommended PSU: 350W (FirePro S10000) vs 550W (GeForce GTX 580). Power connectors: PCIe-powered vs 6-pin + 8-pin. Card length: 305mm vs 267mm, occupying 2 vs 2 slots. Typical load temperature: 85°C vs 85 C.

FeatureFirePro S10000GeForce GTX 580
TDP
375W
244W-35%
Recommended PSU
350W-36%
550W
Power Connector
PCIe-powered
6-pin + 8-pin
Length
305mm
267mm
Height
111mm
111mm
Slots
2
2
Temp (Load)
85°C
85 C
Perf/Watt
12.1
19.0+57%
💰

Value Analysis

At launch, the FirePro S10000 came in at $3599, while the GeForce GTX 580 launched at $499. On MSRP, GeForce GTX 580 was 86.1% cheaper ($3100 less). Performance per dollar on MSRP (G3D Mark / MSRP): 1.3 (FirePro S10000) vs 9.3 (GeForce GTX 580) — the GeForce GTX 580 offers 615.4% better value. The newer card here is FirePro S10000 (2012 vs 2010).

FeatureFirePro S10000GeForce GTX 580
MSRP
$3599
$499-86%
Performance per Dollar
1.3
9.3+615%
Codename
Tahiti
GF110
Release
November 12 2012
November 9 2010
Ranking
#461
#458

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.