FirePro 3D V3750 vs GeForce GTX 1060

FirePro 3D V3750

2014Core: 850 MHz
Similar parts
·······
VS
NVIDIA

GeForce GTX 1060

2016Core: 1607 MHzBoost: 1733 MHz
GTX family
·······

FirePro 3D V3750 vs GeForce GTX 1060 Performance Spectrum

About G3D Mark

G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.

FirePro 3D V3750 vs GeForce GTX 1060: Pros, Cons & Final Verdict

See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.

FirePro 3D V3750

2014

Why buy it

  • Costs $50 less on MSRP ($199 MSRP vs $249 MSRP).
  • Measures 168mm instead of 173mm, a 5mm shorter card that is more SFF-friendly.

Trade-offs

  • Lower PassMark G3D performance (341 vs 10,064).
  • Less VRAM, with 256 MB vs 6 GB for high-resolution textures and newer games.
  • 2014 hardware with 256 MB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.
  • Lower G3D Mark per dollar, at 1.7 vs 40.4 G3D/$ ($199 MSRP vs $249 MSRP).
  • 52.2% higher power demand at 274W vs 180W.

GeForce GTX 1060

2016

Why buy it

  • +2851.3% higher PassMark G3D performance.
  • Delivers 2258.7% more G3D Mark for each dollar spent, at 40.4 vs 1.7 G3D/$ ($249 MSRP vs $199 MSRP).
  • 2300% more VRAM for high-resolution textures and newer games (6 GB vs 256 MB).
  • FirePro 3D V3750 is already obsolete for modern gaming, so GeForce GTX 1060 is the less risky modern option long term.
  • Draws 180W instead of 274W, a 94W reduction.

Trade-offs

  • 2016 hardware with 6 GB of VRAM already sits in legacy territory for modern games.

Quick Answers

Which GPU is faster for gaming right now?
GeForce GTX 1060 is the faster gaming card right now based on the synthetic data we have. It leads by 2851.3% in PassMark G3D (10,064 vs 341), which is the best performance signal available in this matchup.
Which GPU is the safer long-term pick for 2026 and beyond?
GeForce GTX 1060 is the safer long-term pick for 2026 and beyond. The case is simple: 6 GB vs 256 MB of VRAM, a 16nm process instead of 28nm, and a newer 2016 generation instead of 2014. That gives it more room for heavier textures and higher settings over time.
Which GPU is the better buy today?
GeForce GTX 1060 makes the most sense to buy today. It is $50 more expensive on MSRP at $249 vs $199, and it leads G3D-per-dollar by 2258.7% (40.4 vs 1.7), so the value case lines up with the gaming result.

FirePro 3D V3750 vs GeForce GTX 1060 Technical Specifications

Side-by-side specs, architecture details, clocks, memory, power, and platform differences.

AMD

FirePro 3D V3750

The FirePro 3D V3750 is manufactured by AMD. It was released in January 18 2014. It features the GCN 1.0 architecture. The core clock speed is 850 MHz. It has 2048 shading units. The thermal design power (TDP) is 274W. Manufactured using 28 nm process technology. G3D Mark benchmark score: 341 points.

NVIDIA

GeForce GTX 1060

The GeForce GTX 1060 is manufactured by NVIDIA. It was released in May 27 2016. It features the Pascal architecture. The core clock ranges from 1607 MHz to 1733 MHz. It has 2560 shading units. The thermal design power (TDP) is 180W. Manufactured using 16 nm process technology. G3D Mark benchmark score: 10,064 points. Launch price was $599.

Graphics Performance

In G3D Mark, the FirePro 3D V3750 scores 341 versus the GeForce GTX 1060's 10,064 — the GeForce GTX 1060 leads by 2851.3%. The FirePro 3D V3750 is built on GCN 1.0 while the GeForce GTX 1060 uses Pascal, both on 28 nm vs 16 nm. Shader units: 2,048 (FirePro 3D V3750) vs 2,560 (GeForce GTX 1060). Raw compute: 3.482 TFLOPS (FirePro 3D V3750) vs 8.873 TFLOPS (GeForce GTX 1060).

FeatureFirePro 3D V3750GeForce GTX 1060
G3D Mark Score
341
10,064+2851%
Architecture
GCN 1.0
Pascal
Process Node
28 nm
16 nm
Shading Units
2048
2560+25%
Compute (TFLOPS)
3.482 TFLOPS
8.873 TFLOPS+155%
ROPs
32
64+100%
TMUs
128
160+25%
L1 Cache
512 KB
960 KB+88%
L2 Cache
0.75 MB
2 MB+167%

Advanced Features (DLSS/FSR)

The GeForce GTX 1060 gets NVIDIA DLSS, which still tends to look cleaner in motion. The FirePro 3D V3750 leans on FSR, which is flexible and widely supported, but usually a bit rougher at the same settings.

FeatureFirePro 3D V3750GeForce GTX 1060
Upscaling Tech
Upscaling support
Upscaling support
Frame Generation
Not Supported
Not Supported
Ray Reconstruction
No
No
Low Latency
Standard
NVIDIA Reflex
💾

Video Memory (VRAM)

The FirePro 3D V3750 has 256 MB of VRAM, while the GeForce GTX 1060 carries 6 GB. GeForce GTX 1060 gives you 2300% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 64-bit on the FirePro 3D V3750 and 192-bit on the GeForce GTX 1060. L2 Cache: 0.75 MB (FirePro 3D V3750) vs 2 MB (GeForce GTX 1060) — the GeForce GTX 1060 has significantly larger on-die cache to reduce VRAM reliance.

FeatureFirePro 3D V3750GeForce GTX 1060
VRAM Capacity
0.25 GB
6 GB+2300%
Memory Type
GDDR5
GDDR5
Bus Width
64-bit
192-bit+200%
L2 Cache
0.75 MB
2 MB+167%
🖥️

Display & API Support

DirectX support: 10.1 (FirePro 3D V3750) vs 12 (GeForce GTX 1060). Vulkan: None vs 1.3. OpenGL: 3.3 vs 4.5. Maximum simultaneous displays: 2 vs 4.

FeatureFirePro 3D V3750GeForce GTX 1060
DirectX
10.1
12+19%
Vulkan
None
1.3
OpenGL
3.3
4.5+36%
Max Displays
2
4+100%
🎬

Media & Encoding

Hardware encoder: UVD 2.2 (FirePro 3D V3750) vs NVENC (Pascal) (GeForce GTX 1060). Decoder: UVD 2.2 vs NVDEC (Pascal). Supported codecs: MPEG-2,H.264,VC-1 (FirePro 3D V3750) vs H.264,H.265/HEVC (GeForce GTX 1060).

FeatureFirePro 3D V3750GeForce GTX 1060
Encoder
UVD 2.2
NVENC (Pascal)
Decoder
UVD 2.2
NVDEC (Pascal)
Codecs
MPEG-2,H.264,VC-1
H.264,H.265/HEVC
🔌

Power & Dimensions

The FirePro 3D V3750 draws 274W versus the GeForce GTX 1060's 180W — a 41.4% difference. The GeForce GTX 1060 is more power-efficient. Recommended PSU: 350W (FirePro 3D V3750) vs 400W (GeForce GTX 1060). Power connectors: PCIe-powered vs 6-pin. Card length: 168mm vs 173mm, occupying 1 vs 2 slots.

FeatureFirePro 3D V3750GeForce GTX 1060
TDP
274W
180W-34%
Recommended PSU
350W-13%
400W
Power Connector
PCIe-powered
6-pin
Length
168mm
173mm
Height
111mm
111mm
Slots
1-50%
2
Temp (Load)
70°C
Perf/Watt
1.2
55.9+4558%
💰

Value Analysis

At launch, the FirePro 3D V3750 came in at $199, while the GeForce GTX 1060 launched at $249. On MSRP, FirePro 3D V3750 was 20.1% cheaper ($50 less). Performance per dollar on MSRP (G3D Mark / MSRP): 1.7 (FirePro 3D V3750) vs 40.4 (GeForce GTX 1060) — the GeForce GTX 1060 offers 2276.5% better value. The newer card here is GeForce GTX 1060 (2016 vs 2014).

FeatureFirePro 3D V3750GeForce GTX 1060
MSRP
$199-20%
$249
Performance per Dollar
1.7
40.4+2276%
Codename
Tahiti
GP104
Release
January 18 2014
May 27 2016
Ranking
#423
#137

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.