FireStream 9270 vs GeForce RTX 3070

FireStream 9270

2008Core: 750 MHz
Similar parts
·······
VS
NVIDIA

GeForce RTX 3070

2020Core: 1500 MHzBoost: 1725 MHz
RTX family
·······

FireStream 9270 vs GeForce RTX 3070 Performance Spectrum

About G3D Mark

G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.

FireStream 9270 vs GeForce RTX 3070: Pros, Cons & Final Verdict

See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.

FireStream 9270

2008

Why buy it

  • Draws 160W instead of 220W, a 60W reduction.
  • Measures 241mm instead of 242mm, a 1mm shorter card that is more SFF-friendly.

Trade-offs

  • Lower PassMark G3D performance (1,341 vs 22,172).
  • Less VRAM, with 2 GB vs 8 GB for high-resolution textures and newer games.
  • No DLSS support; it relies on Upscaling support instead.
  • 2008 hardware with 2 GB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.
  • 200.4% HIGHER MSRP
    $1,499 MSRPvs$499 MSRP

GeForce RTX 3070

2020

Why buy it

  • +1553.4% higher PassMark G3D performance.
  • Costs $1,000 less on MSRP ($499 MSRP vs $1,499 MSRP).
  • Delivers 4866.8% more G3D Mark for each dollar spent, at 44.4 vs 0.9 G3D/$ ($499 MSRP vs $1,499 MSRP).
  • Access to DLSS 2 Super Resolution (2020).
  • 300% more VRAM for high-resolution textures and newer games (8 GB vs 2 GB).

Trade-offs

  • 37.5% higher power demand at 220W vs 160W.

Quick Answers

Which GPU is faster for gaming right now?
GeForce RTX 3070 is the faster gaming card right now based on the synthetic data we have. It leads by 1553.4% in PassMark G3D (22,172 vs 1,341), which is the best performance signal available in this matchup.
Which GPU is the safer long-term pick for 2026 and beyond?
GeForce RTX 3070 is the safer long-term pick for 2026 and beyond. The case is simple: 8 GB vs 2 GB of VRAM, the newer upscaling stack, DLSS 2 Super Resolution (2020) instead of no meaningful modern upscaling stack, a 8nm process instead of 55nm, and 46 vs 0 ray-tracing units. That gives it more room for heavier textures and higher settings over time.
Which GPU is the better buy today?
GeForce RTX 3070 makes the most sense to buy today. It is $1,000 cheaper on MSRP at $499 vs $1,499, and it leads G3D-per-dollar by 4866.8% (44.4 vs 0.9), so the value case lines up with the gaming result.

FireStream 9270 vs GeForce RTX 3070 Technical Specifications

Side-by-side specs, architecture details, clocks, memory, power, and platform differences.

AMD

FireStream 9270

The FireStream 9270 is manufactured by AMD. It was released in November 13 2008. It features the TeraScale architecture. The core clock speed is 750 MHz. It has 800 shading units. The thermal design power (TDP) is 160W. Manufactured using 55 nm process technology. G3D Mark benchmark score: 1,341 points.

NVIDIA

GeForce RTX 3070

The GeForce RTX 3070 is manufactured by NVIDIA. It was released in September 1 2020. It features the Ampere architecture. The core clock ranges from 1500 MHz to 1725 MHz. It has 5888 shading units. The thermal design power (TDP) is 220W. Manufactured using 8 nm process technology. It features 46 dedicated ray tracing cores for enhanced lighting effects. G3D Mark benchmark score: 22,172 points. Launch price was $499.

Graphics Performance

In G3D Mark, the FireStream 9270 scores 1,341 versus the GeForce RTX 3070's 22,172 — the GeForce RTX 3070 leads by 1553.4%. The FireStream 9270 is built on TeraScale while the GeForce RTX 3070 uses Ampere, both on 55 nm vs 8 nm. Shader units: 800 (FireStream 9270) vs 5,888 (GeForce RTX 3070). Raw compute: 1.2 TFLOPS (FireStream 9270) vs 20.31 TFLOPS (GeForce RTX 3070).

FeatureFireStream 9270GeForce RTX 3070
G3D Mark Score
1,341
22,172+1553%
Architecture
TeraScale
Ampere
Process Node
55 nm
8 nm
Shading Units
800
5888+636%
Compute (TFLOPS)
1.2 TFLOPS
20.31 TFLOPS+1593%
ROPs
16
96+500%
TMUs
40
184+360%
L1 Cache
0.16 MB
5.8 MB+3525%
L2 Cache
0.25 MB
4 MB+1500%

Advanced Features (DLSS/FSR)

The GeForce RTX 3070 gets NVIDIA DLSS, which still tends to look cleaner in motion. The FireStream 9270 leans on FSR, which is flexible and widely supported, but usually a bit rougher at the same settings.

FeatureFireStream 9270GeForce RTX 3070
Upscaling Tech
Upscaling support
DLSS 2 Super Resolution
Frame Generation
Not Supported
Not Supported
Ray Reconstruction
No
No
Low Latency
Standard
NVIDIA Reflex
💾

Video Memory (VRAM)

The FireStream 9270 has 2 GB of VRAM, while the GeForce RTX 3070 carries 8 GB. GeForce RTX 3070 gives you 300% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 64-bit on the FireStream 9270 and 256-bit on the GeForce RTX 3070. L2 Cache: 0.25 MB (FireStream 9270) vs 4 MB (GeForce RTX 3070) — the GeForce RTX 3070 has significantly larger on-die cache to reduce VRAM reliance.

FeatureFireStream 9270GeForce RTX 3070
VRAM Capacity
2 GB
8 GB+300%
Memory Type
GDDR5
GDDR6
Bus Width
64-bit
256-bit+300%
L2 Cache
0.25 MB
4 MB+1500%
🖥️

Display & API Support

DirectX support: 10.1 (FireStream 9270) vs 12 Ultimate (GeForce RTX 3070). OpenGL: 3.3 vs 4.6. Maximum simultaneous displays: 1 vs 4.

FeatureFireStream 9270GeForce RTX 3070
DirectX
10.1
12 Ultimate+19%
OpenGL
3.3
4.6+39%
Max Displays
1
4+300%
🎬

Media & Encoding

Hardware encoder: None (FireStream 9270) vs NVENC 7th gen (GeForce RTX 3070). Decoder: UVD 2.2 vs NVDEC 5th gen. Supported codecs: H.264,VC-1,MPEG-2 (FireStream 9270) vs H.264,H.265/HEVC,AV1,VP9 (GeForce RTX 3070).

FeatureFireStream 9270GeForce RTX 3070
Encoder
None
NVENC 7th gen
Decoder
UVD 2.2
NVDEC 5th gen
Codecs
H.264,VC-1,MPEG-2
H.264,H.265/HEVC,AV1,VP9
🔌

Power & Dimensions

The FireStream 9270 draws 160W versus the GeForce RTX 3070's 220W — a 31.6% difference. The FireStream 9270 is more power-efficient. Recommended PSU: 350W (FireStream 9270) vs 650W (GeForce RTX 3070). Power connectors: PCIe-powered vs 8-pin. Card length: 241mm vs 242mm, occupying 2 vs 2 slots. Typical load temperature: 85°C vs 75°C.

FeatureFireStream 9270GeForce RTX 3070
TDP
160W-27%
220W
Recommended PSU
350W-46%
650W
Power Connector
PCIe-powered
8-pin
Length
241mm
242mm
Height
111mm
112mm
Slots
2
2
Temp (Load)
85°C
75°C-12%
Perf/Watt
8.4
100.8+1100%
💰

Value Analysis

At launch, the FireStream 9270 came in at $1499, while the GeForce RTX 3070 launched at $499. On MSRP, GeForce RTX 3070 was 66.7% cheaper ($1000 less). Performance per dollar on MSRP (G3D Mark / MSRP): 0.9 (FireStream 9270) vs 44.4 (GeForce RTX 3070) — the GeForce RTX 3070 offers 4833.3% better value. The newer card here is GeForce RTX 3070 (2020 vs 2008).

FeatureFireStream 9270GeForce RTX 3070
MSRP
$1499
$499-67%
Performance per Dollar
0.9
44.4+4833%
Codename
RV770
GA104
Release
November 13 2008
September 1 2020
Ranking
#790
#63

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.