Chipversus Index
Jump to Section

FirePro 2450 vs GeForce RTX 3060

CPUCPUGPUGPU

FirePro 2450

2013Core: 715 MHz
Buy on Amazon
VS
NVIDIA

GeForce RTX 3060

2021Core: 1320 MHzBoost: 1777 MHz
RTX family
·······
Buy on Amazon

FirePro 2450 vs GeForce RTX 3060 Performance Spectrum

FirePro 2450
0.5 GB 150
51
0.0%
brand logoMOBILITY RADEON 9700
brand logoMOBILITY RADEON X300
brand logoMOBILITY RADEON 9600/9700
brand logoMobility Radeon X1400
brand logoRadeon HD 7950 / R9 280
brand logoRadeon R9 Fury
brand logoRadeon RX 5700
brand logoRadeon RX 6700
GeForce RTX 3060
12 GB 170
16,995
+33223.5%
brand logoGeForce RTX 3050 4GB Mobile
brand logoGeForce RTX 2060 (Mobile)
brand logoGeForce RTX 3060 Laptop GPU
brand logoRTX 2000 Ada Generation Embedded GPU
brand logoTITAN V
brand logoGeForce RTX 4060 Ti 16GB
brand logoGeForce RTX 5070 Ti Mobile
brand logoGeForce RTX 5070

About G3D Mark

G3D Mark is a standard benchmark that measures graphics performance in real-world gaming scenarios. It simplifies comparing cards from different brands, where higher scores directly correlate with better fps and smoother gaming experiences.

FirePro 2450 vs GeForce RTX 3060: Pros, Cons & Final Verdict

See where each GPU makes more sense in practice: raw FPS, VRAM, features, power draw, pricing, and long-term headroom.

FirePro 2450

2013

Why buy it

  • ✅Measures 170mm instead of 242mm, a 72mm shorter card that is more SFF-friendly.

Trade-offs

  • ❌Lower PassMark G3D performance (51 vs 16,995).
  • ❌Less VRAM, with 512 MB vs 12 GB for high-resolution textures and newer games.
  • ❌No DLSS support; it relies on Upscaling support instead.
  • ❌2013 hardware with 512 MB of VRAM is already well past its comfortable zone for modern gaming, so it is hard to recommend now.
  • ❌Lower G3D Mark per dollar, at 0 vs 51.7 G3D/$ (Unknown MSRP vs $329 MSRP).

GeForce RTX 3060

2021

Why buy it

  • ✅+33223.5% higher PassMark G3D performance.
  • ✅Delivers 100+% more G3D Mark for each dollar spent, at 51.7 vs 0 G3D/$ ($329 MSRP vs Unknown MSRP).
  • ✅Access to DLSS 2 Super Resolution (2020).
  • ✅2300% more VRAM for high-resolution textures and newer games (12 GB vs 512 MB).
  • ✅Better long-term bet: Ampere on 8nm gives it a newer hardware base for upcoming games.

Trade-offs

  • ❌42.4% longer card at 242mm vs 170mm.

Quick Answers

Which GPU is faster for gaming right now?
GeForce RTX 3060 is the faster gaming card right now based on the synthetic data we have. It leads by 33223.5% in PassMark G3D (16,995 vs 51), which is the best performance signal available in this matchup.
Which GPU is the safer long-term pick for 2026 and beyond?
GeForce RTX 3060 is the safer long-term pick for 2026 and beyond. The case is simple: 12 GB vs 512 MB of VRAM, the newer upscaling stack, DLSS 2 Super Resolution (2020) instead of no meaningful modern upscaling stack, a 8nm process instead of 28nm, and 28 vs 0 ray-tracing units. That gives it more room for heavier textures and higher settings over time.
Which GPU is the better buy today?
GeForce RTX 3060 makes the most sense today based on the pricing and value data we have for this matchup.

FirePro 2450 vs GeForce RTX 3060 Technical Specifications

Side-by-side specs, architecture details, clocks, memory, power, and platform differences.

AMD

FirePro 2450

The FirePro 2450 is manufactured by AMD. It was released in October 16 2013. It features the GCN 1.0 architecture. The core clock speed is 715 MHz. It has 384 shading units. The thermal design power (TDP) is 150W. Manufactured using 28 nm process technology. G3D Mark benchmark score: 51 points.

NVIDIA

GeForce RTX 3060

The GeForce RTX 3060 is manufactured by NVIDIA. It was released in January 12 2021. It features the Ampere architecture. The core clock ranges from 1320 MHz to 1777 MHz. It has 3584 shading units. The thermal design power (TDP) is 170W. Manufactured using 8 nm process technology. It features 28 dedicated ray tracing cores for enhanced lighting effects. G3D Mark benchmark score: 16,995 points. Launch price was $329.

⚡

Graphics Performance

In G3D Mark, the FirePro 2450 scores 51 versus the GeForce RTX 3060's 16,995 — the GeForce RTX 3060 leads by 33223.5%. The FirePro 2450 is built on GCN 1.0 while the GeForce RTX 3060 uses Ampere, both on 28 nm vs 8 nm. Shader units: 384 (FirePro 2450) vs 3,584 (GeForce RTX 3060). Raw compute: 0.5491 TFLOPS (FirePro 2450) vs 12.74 TFLOPS (GeForce RTX 3060).

FeatureFirePro 2450GeForce RTX 3060
G3D Mark Score
51
16,995+33224%
Architecture
GCN 1.0
Ampere
Process Node
28 nm
8 nm
Shading Units
384
3584+833%
Compute (TFLOPS)
0.5491 TFLOPS
12.74 TFLOPS+2220%
ROPs
8
48+500%
TMUs
24
112+367%
L1 Cache
0.09 MB
3.5 MB+3789%
L2 Cache
0.25 MB
3 MB+1100%
✨

Advanced Features (DLSS/FSR)

The GeForce RTX 3060 gets NVIDIA DLSS, which still tends to look cleaner in motion. The FirePro 2450 leans on FSR, which is flexible and widely supported, but usually a bit rougher at the same settings.

FeatureFirePro 2450GeForce RTX 3060
Upscaling Tech
Upscaling support
DLSS 2 Super Resolution
Frame Generation
Not Supported
Not Supported
Ray Reconstruction
No
No
Low Latency
Standard
NVIDIA Reflex
💾

Video Memory (VRAM)

The FirePro 2450 has 512 MB of VRAM, while the GeForce RTX 3060 carries 12 GB. GeForce RTX 3060 gives you 2300% more memory capacity, which matters more once you move into heavier textures, mods, or higher resolutions. Memory bus width is 64-bit on the FirePro 2450 and 192-bit on the GeForce RTX 3060. L2 Cache: 0.25 MB (FirePro 2450) vs 3 MB (GeForce RTX 3060) — the GeForce RTX 3060 has significantly larger on-die cache to reduce VRAM reliance.

FeatureFirePro 2450GeForce RTX 3060
VRAM Capacity
0.5 GB
12 GB+2300%
Memory Type
GDDR5
GDDR6
Bus Width
64-bit
192-bit+200%
L2 Cache
0.25 MB
3 MB+1100%
🖥️

Display & API Support

DirectX support: 10.1 (FirePro 2450) vs 12 Ultimate (GeForce RTX 3060). OpenGL: 3.3 vs 4.6. Maximum simultaneous displays: 4 vs 4.

FeatureFirePro 2450GeForce RTX 3060
DirectX
10.1
12 Ultimate+19%
OpenGL
3.3
4.6+39%
Max Displays
4
4
🎬

Media & Encoding

Hardware encoder: UVD (FirePro 2450) vs NVENC 7th Gen (GeForce RTX 3060). Decoder: UVD vs NVDEC 5th Gen. Supported codecs: MPEG-2,H.264,VC-1 (FirePro 2450) vs AV1,H.265,H.264,VP9 (GeForce RTX 3060).

FeatureFirePro 2450GeForce RTX 3060
Encoder
UVD
NVENC 7th Gen
Decoder
UVD
NVDEC 5th Gen
Codecs
MPEG-2,H.264,VC-1
AV1,H.265,H.264,VP9
🔌

Power & Dimensions

The FirePro 2450 draws 150W versus the GeForce RTX 3060's 170W — a 12.5% difference. The FirePro 2450 is more power-efficient. Recommended PSU: 350W (FirePro 2450) vs 550W (GeForce RTX 3060). Power connectors: PCIe-powered vs 8-pin. Card length: 170mm vs 242mm, occupying 1 vs 2 slots. Typical load temperature: 60°C vs 75.

FeatureFirePro 2450GeForce RTX 3060
TDP
150W-12%
170W
Recommended PSU
350W-36%
550W
Power Connector
PCIe-powered
8-pin
Length
170mm
242mm
Height
69mm
112mm
Slots
1-50%
2
Temp (Load)
60°C-20%
75
Perf/Watt
0.3
100.0+33233%
💰

Value Analysis

At launch, the FirePro 2450 came in at $0, while the GeForce RTX 3060 launched at $329. On MSRP, FirePro 2450 was 100+% cheaper ($329 less). Performance per dollar on MSRP (G3D Mark / MSRP): Infinity (FirePro 2450) vs 51.7 (GeForce RTX 3060) — the FirePro 2450 offers Infinity% better value. The newer card here is GeForce RTX 3060 (2021 vs 2013).

FeatureFirePro 2450GeForce RTX 3060
MSRP
$0-100%
$329
Performance per Dollar
Infinity
51.7
Codename
Opal
GA106
Release
October 16 2013
January 12 2021
Ranking
#879
#114
Search FirePro 2450 on AmazonSearch GeForce RTX 3060 on Amazon

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.